16/3 End of flowering looks set quite well

Plants growing super fast

1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.

The Runtz has been an incredible strain to grow and she looks fantastic after the trim. I’ll update everything after she’s dried and I get to taste her briefly before the cure! 🙌🏼 Edit - Runtz is tasting incredible after a week dry. Now it’s in to the jars for curing! Thanks fir checking in.

Week 5 and we are sailing along just topped dressed the plants as of day 30 and feed them their weekly organic mater with compost tea and top dress some home made worm castings adding worms and biology to the soil. 2 more week since the one gallon and then into their final home. Removed all big fans as of day 31 to allow all side branches to grow out into a bush. The little fans will replace the bigger ones. Strong Smells of lemon lime noticeable after handling plants

Happy to see big bud , and to see the crossing of this both concours winner ,I can’t wait to test it…

Day 23 The third week of flowering is complete. Most of the height growth is finished. Time for a radical defoliation. The girls look great. Unfortunately, Kush has formed hermaphrodites on the flowers in the shade. I hope that I have removed them all. The lamp will be raised to 100% output in two stages.

Her 2nd week was pretty good,she could be a little bigger with a few hours more of sun that's why I moved my plants almost everyday.she looks very healthy let's see how she performs

Hi guys lost track of where i am now lol so we will run until there done lol I got a seprate dry tent now so makes my life easier. 1 purple startdawg lst 1 green startsawg lst 1 cheese lst 1 cheese oh natraul grown with polyploid 2 x pot noodle blueberry 1 x blueberry lst 3 x baby photo period big budha cheese. Leave me a comment let me know your thoughts so far.

First week of flower in the books💯👊🏻

All three plants are hermaphrodites, however, plants 1 and 2 are showing minimal signs of male with seeds developing only on lower nodes, while plant 3 looks mostly male with a few pistils only on the very top nodes. I've decided to pluck the seeds from plants 1 & 2 as they develop, and to toss plant 3 to make room for the other 2. It's not ideal and I plan to buy feminized seeds or clones for my next grow, but the bud I got the seeds from was actually really good so I'm going to try to take 1 and 2 to harvest.

growing happily along, platinum yeti stretching more then sour 76. defoliate day 21 . smell starting to come on, stopped using foliar feed this week, been on top of hitting compost teas every single off watering (1 feed heavy 16 nutes, 1 compost tea when coco dries. repeat).

—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Quick One is a fast-growing autoflowering strain. This was one of the first autoflowering strains developed. When it was first released, it was one of the quickest growing strains on the planet. THC: 13% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 100 - 150 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 100 cm Flowering: 5 - 6 Weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Strong Indica x Ruderalis Type: Sa 10% In 60% Ru 30% Effect: Physical Climate: Mild —RQS QUICK ONE GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, with a yellow center, let's give her some days in and see what happens next.

Flowering continues. I regularly do some defoliation to improve airflow and light penetration, but she actively raises new leaves.

Trimmed alot of dead leaves of today . Going to run 2 more days then light out. Stacked on a lot of weight this week. Looking forward to finally being able to smoke only a couple of weeks away

Stretching and Pistel everywhere Changed reservoirs Saturday , did a tiny ‘branch amendment ‘ It’s a Fukien jungle in there !

Venga familia, cosecha de estas Frosty tooth de Seedstockers, que ganas que tenía. No veas que pinta marcan estas plantas. Las flores aparte se ven bien resinosas y prietas, aparte son aromáticas huelen bien fuerte. En general es una genética con la que disfruté bastante cultivarla, la genética es perfecta para cultivos de floración corta con rangos entre los 20/25 grados en interior, es de dificultad media cultivarla y bien resistente, es excelente para cultivadores algo experimentados y con algo de conocimientos. Hasta aquí es todo, espero que lo disfrutéis, buenos humos 💨💨.

LJ4Q23 Bolt III SOP LJ4Q23 - 8-Plant SOG from Cuts Objective: - 8 Plants - Single Colas - No Branches - Harvest Lemon Jeffery (Narrow Leaf Phenos): 70±5 days - Light Intensity - Ramp up from 200 - > 40 DLI, at 13 hour ScotoPeriod, will need MAX Light to Achieve - Ramp Light Intensity to MAX ASAP (3 Weeks?) Notes: - Lemon Jeffery handles HIGH LIGHT Well, even within 6” of Light @ ~1800 µMol/m2/ - The challenge will be achieving minimum 40 Mol/day, which in this setup requires 1000 µMol/m2/s @ 13 hour Scotoperiod ______________________________________ Start of Week: [ 2023-12-13, LJ4Q 15:B:2:1] End of Week: [ 2023-12-19, LJ4Q 21:B:2:7] Environment Targets (Bolt III): - Scotoperiod: [ 13, h] # Contiguous dark hours daily - DayPeriod: [ 1900, 0600 +24h] - TemperatureMax: [ 78, °F] #CHANGE from [82, °F] - RH: [ 68, %] - VPD: [ 1.0, mS] - LightIntensity: [ 850, 1000, µMol/m2/s] - LightDistance: [ 16.5, “] Bolt III Fertigation - RLA HYDRO Chart, Week 4, EC: [ 1.8, mS] - Primer A: [ 8.5, ml, gal] - Primer B: [ 8.5, ml, gal] - Silica Skin: [ 4.25, ml, gal] All Fertigation Add - Plant Success: - Microbelife Photosynthesis Plus: [ 0.5, ml/gal] - Build-a-Soil: - Quillaja20 Powder: [ 0.5, tsp/gal] - South Cascade Organics: - SLF-100: [ 5, ml, gal] __ Wed Dec 13, 2023 LJ4Q 15:B:2:1 LightIntensity: [ 932, µMol/m2/s] DLI: [ 35.1, 11, mol/m2/day] # On our way to 40 DLI Popped above 12” Plant Height (13 - 14”) 24# Photone Filter, Add 10%: 848 x 1.1 : 932 - [x] Measure Runoff - [x] Amt: 600 - Reduced Irrigation Event from 2:30 to 2:15 - Measure Thursday, Adjust. Foliar: - [ ] CalMag Fuel: [ 20, ml/gal] - [ ] Peak Bloom: [ 5, ml/gal] __ Thu Dec 14, 2023 LJ4Q 16:B:2:2 - [x] Reset Intensity - LightIntensity: [ 838, µMol/m2/s] # Calculated, 24# Filter, +10%, 762 Measured, 30.1 DLI - [x] Change Light Distance: [ 19.5, in] - [x] DLI: [ 33, mol/m2] - [x] Measure Runoff - [x] Amt: [ 400, ml] - 8 X 4400 X 10% (Field Capacity): 3520 Max, 350 - 450 is the target runoff per day - 15 sec: 200, ml. 200/15 ml/sec / 8 plants: 1.6 ml/sec. Close to our 1.7 ml/sec per plant Consider that - So we want field capacity per day, until we’re showing drought stress. - 4400 ml X 10%: 440 ml/plant/day - 110 ml/plant/event - 4 events/day - But that would only be 64 seconds, not current 135. - Let’s reduce again to 2 Minutes total, and evaluate. GUESS: If Linear, we should have 200 ml runoff __ Fri Dec 15, 2023 LJ4Q 17:B:2:3 Res: [ 4, gal] Environment Actuals - Scotoperiod: [ 13, h] # Contiguous dark hours daily - DayPeriod: [ 1900, 0600 +24h] - TemperatureMax: [ 78, °F] - RH: [ 67, %] - VPD: [ 0.86, mS] - LightIntensity: [ 838, 1000, µMol/m2/s] - LightDistance: [ 19.5, in] - [x] Refresh Reservoir - [x] 4 Gal - [x] Change Irrigation Duration Before 1845 - [x] IrrigationDuration: [ 2, min] - [x] Measure Runoff @1930 - [x] Amt: 180, ml. # after 2 fertigations 🤨 - Raised Fertigation per event to 2:15 fm 2:00 Guesstimate: 120 sec * 1.7 ml/sec: 204 ml I think we’re closer to 0.8 ml/sec: ~ 100 ml per delivery (2min) Refresh - 4 Gallons - Primer A: [ 36, ml] - Primer B: [ 36, ml] - Silica Skin: [ 18, ml] - King Crab: [ 2, ml] - Terps Plus: [ 2, ml] - Quillaja 20: [ 2, tsp] - SLF-100: [ 20, ml] - EC: 1.8 Res Temp: [ 60, F] Irrigation Timing Update Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:47:00 Event 1 21:30:00 21:32:00 Event 2 00:15:00 00:17:00 Event 3 03:00:00 03:02:00 - Foliar: - [ ] Solar Rain: [ 20, ml/gal] - [ ] Peak Bloom: [ 5, ml/gal] __ Sat Dec 16, 2023 LJ4Q 18:B:2:4 - [x] Measure Runoff - [x] Amt: [ 250, ml] We really need the additional 15 seconds, reset today: Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:47:15 Event 1 21:30:00 21:32:15 Event 2 00:15:00 00:17:15 Event 3 03:00:00 03:02:15 __ Sun Dec 17, 2023 LJ4Q 19:B:2:5 - [x] Measure Runoff - [x] Amt: [ 230, ml] #1930 - LightIntensity: [ 1047, µMol/m2/s] # 110% of Photone 952 - DLI: 61.7 __ Mon Dec 18, 2023 LJ4Q 20:B:2:6 - [x] Measure Runoff - [x] Amt: [ 80, ml] - On the theory that the main feed line siphons back to res, despite back flow adaptor - Add 45 Seconds to FIRST Feed of Day to Assure Priming and delivery of feed water. - Add 15 Seconds to remaining 3 __ Tue Dec 19, 2023 LJ4Q 21:B:2:7 - [ ] Measure Runoff - [ ] Amt: Added :45 to initial fertigation, :15 to remaining. Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:48:00 Event 1 21:30:00 21:32:30 Event 2 00:15:00 00:17:30 Event 3 03:00:00 03:02:30

- The trichomes photos have been taken just before the harvest. - Drying was made between 22-24°C and between 55-70% of humidity (5 days). - Curing before smoke test : 14 days Veg time : 27 days Flowering time : 39 days Total time from seed to harvest : 70 days Height : 20.5cm Pot size : 1.5l

This week a few different things happened . 1. After I flushed to remedy all purple stems Runtz & Zkittlez developed deformed leaf sets. The runts leaf set didn’t form on 1 side of the vein. The Zkittlez formed leaf sets with a missing finger . Instead of the being 5 fingers on the 3rd set there were 4 fingers . 2. Day #10 plants looked really sad & droopy the leaves of my plants where pointing downward & the 1st set of serrated leaves began to yellow . 3. To rectify the “super soil” dropping the PH of the water I fed the girls I purchased some PH UP & experimented with a few cups of my soil & found if I put in water at 9.5PH the “Super Soil” balanced out at 6.5 . My tap water PH is about 7.5 with a 200ppm (yes , yes, I know , tell me about it) if I put regular tap water in my soil drops it to a 5.1 -5.3 which led to the purple stems in the 1st week. Granted I’m kinda working backwards to work with what I have in order to utilize my investments it’s a means to an end I suppose BUT I AM OPEN TO SENSIBLE THOUGHT OUT ADVICE THANKS. 4. Day #11 I transplanted all the girls into full strength super soil . If I hadn’t had to flush i could have held out another week tops in my solo cups . I could have gotten to atleast the 6th maybe 7th node before transplanting into full strength soil. Currently I’m at the 4th node & noticing slight canoeing of the leaves . This is my first grow in this “supersoil” also my 1st time mixing my own amendments to make said “supersoil” so for the time being I’ll just keep an eye on it & hope the plant establishes quickly enough to be able to consume the quantities of nutrients in this soil THUS my generous generous use of Mykos . Today makes 2 weeks for Runtz & #1 GDP the the remaining 4 are at day #13. I’m still hoping by day 16 I can start LST’ing . All but 1 or 2 of the girls have began growing secondary shoots along the nodes so I’m getting more an more excited . I’m just envisioning the plants I want to have until it comes to fruition. I am by no means an expert I’m not even a reasonably decent grower . Out of the 3 runs I’ve done so far only one produced smokable poor quality buds . Each time spawning more research & a tweak to the setup . THIS TIME I AM CALM COOL & COLLECTED as I’ve ever been & have my eyes set on a lofty yield of high quality buds I’m aiming to get a QP p/plant but honestly I want to push them to get a HP p/plant . Which sounds like I’m in Narnia NeverLand with such high expectations .. I’ll just shoot for the starts & if I land on the moon instead I’ll be happy with that as long as the end results in me being high . Week 2 in the books 📚