Likes
Comments
Share
Semana 10 de floración: Los valores en el drenaje del riego, siguen altos, la EC midió 1650 ppm y el ph me dio 6.1,( bajo el valor del ph pero no tanto las ppm ) Los cogollos se siguen cargando de resina y aumentando en tamaño , el aroma es rico dulce, afrutado. El camino que queda es largo, pero la planta va respondiendo relativamente bien.
Likes
26
Share
@shibbyguy
Follow
Day 50 - Decided to veg for one more week. Plants currently 70cm x 70cm wide and 33cm tall, hoping to get to 40cm at end of week. Fixed issue with the low extration rate. Found the filter had become blocked from the humidifier. Have moved it to the opposite side of tent. Hopefully this prevents it from happening again. Day 53 - Have been have Ph issue again due to algae. Plant hasnt been drinking much and growth seems very slow. Day 55 - Defoliated whole plant. Roots have some slime on them. Peroxide flushed with plain water for 12hrs maintained around 150ppm. All slime appears to be gone.
Likes
27
Share
Week 6 for Kalini Asia, by Zamnesia Seeds, This girl is doing pretty good quite happy with her. Will probably be transplanting her + topping her again some time this week for 16tops.
Likes
11
Share
sooooo... I have now harvested the plants and they looks so pretty 😍😌 I'm really proud of myself to have produced such THICC BUDS!!! 😅😍 and the smell is so awsome 😵 this strain is a 11 from 10 👌 a realy big Thanks to Royal Queen Seeds for this 2 awsome strains 💪 A detailed rating comes after drying with a detailed score board 😄
Likes
3
Share
Just transplanted them into their final 50 L pots
Likes
13
Share
@GeOMaTTiC
Follow
Diary Legend: 💧- Watered 🌱- Seedling 🥦- Vegging 🌷- Flowering 🌲- Cut Down 🍃- Defoliation ✂️- Topping or FIM'ING 🚂- Training (LST) 💩- Fertilized 🆕🏠 - New Home (transplant) Wk6 11/21/21: Day 36. Plant is looking mighty fine, definitely one great strain to grow. Someday I'd like to see her natural shape, as I could see it being one nice bushy baby. I still need to perform some defoliation and cutting of branches, but it's alright for now. I will defoliate in a day or two, and then follow up with the cuttings a little while after. I still haven't decided if I'm going to clone the cuttings or not. I am lazy enough that I don't want to, but I'm frugal enough to not want to waste good buds. I probably will clone them. If I have room to stuff them in the flower tent, I will. If not, I'll have to grow them out a bit, and then flower them when I can. 11/22/21: Day 37. ✂️🍃 Defoliated and cut some branches, the 6 that were big enough were dipped in rooting gel, and placed in rooting cubes. Now resting inside the humidity dome. Once rooted and transplanted, allow a bit of time to veg, and then move over into the flower tent. If there is no room, see if Crit wants some, and Josh as well. Plant definitely needs watering, which I will administer later on this evening. 11/23/21: Day 38. 💧Love the way this plant explodes with growth, this bugger doesn't seem to want to stop. Hoping at least one of those clones roots, so I can see what an untouched branched will flower into. If I ever get these seeds again, I will definitely grow one out that is untouched, I'm curious to see it's natural shape. At only 6 weeks of life, this guy is already bigger than my previous photoperiods at 8 weeks old. Those yielded around 3 ounces each, so I'm expecting a lot more from this one. I will be defoliating most of the leaves on colas, hopefully forcing them to bulk up the buds. It's a technique I've been reading about, and would like to give it a shot. Gave a fair dose of water, but I don't think the entire media was saturated. That is something I find difficult with Gaia Green. Watering to a little runoff is easy, and a simple way to tell if it's completely saturated or not. Since I don't want runoff, I feel as if I'm using a lot less water than I should be. I plan on buying some Coco coir soon, and that I know I will be needing to water a lot more often, which is fine with me. I may even eventually switch over to an automated watering system. Only gravity fed, with drip emitters, that way it's on autopilot for 3 weeks at a time, minus the tweaking of leaves and branches. That would be ideal, eventually, especially with autos, then I can literally do sweet f**k all with the plants. Even if I don't get an automated watering system setup, I still want to switch over to a Coco coir and sunshine mix combo. I may even use some Coco outside with my outdoor plants, but not likely, as the sand is already very quick drying. 11/25/21: Day 40. The only issue I have with this plant, is that I don't get to grow it as big as I'd like to. It still feels like it's going to be one heavy producer though, the way it grows like crazy. We will see how it reacts to the flip into flower 9 or 10 days from now. I will continue to train some branches to keep it spread out. I really wish I was able to go back and redo this one, have it handled better from the start, and grow it out by itself. I will be defoliating in the next few days, and also removing any small shoots that cannot be trained back inwards. 11/27/21: Day 42. 💧Plant is still looking amazing. It is definitely time for another haircut, but I will leave that for tomorrow morning, so it has less time to regrow a bunch of leaves before the flip. One week left, I can't wait. I'm curious to see how much this stretches during flower. I will be tying more branches down as needed, and will now start training the new shoots inwards, to fill out any gaps.
Likes
19
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D105/R01 - 28/02/24 ⚗️ EC: 0.9 pH: 5.2 🌡️ T: 21-25 °C H: 50-65 % 🌊 🍗 💧 💼 🧠 Ripening starts 🚀 🎬 Added timelapse and screenshots and monthly rate of T-H and VPD 📈📈📈 from TrolMaster App Translate ________________________________ 📅 D106/R02 - 29/02/24 ⚗️ EC: 1.2 pH: 6.7 🌡️ T:21-24 °C H: 50-65 % 🌊 🍗 💧 Added pH+ 💼 🧠 If someone who followed the diary from the beginning is asking himself what about mother plant "Mamma Aglio", here I posted some picture of her which demonstrate the difference between a bad and a good grow 🚀 🎬 Added pics of Nicole and pics of "Mamma Aglio" to show the difference between a bad and a good grow with sounds and TrolMaster logo. Added usual timelapse and screenshots. ________________________________ 📅 D107/R03 - 01/03/24 ⚗️ EC: 0.8 pH: 6.4 🌡️ T: 20-24 °C H: 45-65 % 🌊 2L 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse and screenshots. 4 pics added ________________________________ 📅 D108/R04 - 02/03/24 ⚗️ EC: 0.8 pH: 6.7 🌡️ T: 20-25 °C H: 45-70 % 🌊 1L 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse ________________________________ 📅 D109/R05 - 03/03/24 ⚗️ EC: 0.8 pH: 6.7 🌡️ T: 21-25 °C H: 45-65% 🌊 RES Changed 💦💦💦 🍗 💧 💼 🧠 I'm starting the flush, as trichomes look milky and quite ready. In this last week the ripening will be complete and th girl would be ready for harvesting. 🚀 Flush started 🎬Added 8 pics of trichomes, Timelapse and sceenshots. Two pics and two videos of my "garden's pre-harvest magic" 😋😋😋 ________________________________ 📅 D110/R06 - 04/03/24 ⚗️ EC: 0.2 pH: 7.5 🌡️ T: 19-25 °C H: 55-65% 🌊 🍗 Flawless finish 💧 💼 🧠 1 day with pure water and now I added Flawless finish 🚀 Flushing 🎬Added Timelapse and sceenshots ________________________________ 📅 D111/R07 - 05/03/24 ⚗️ EC: 0.2 pH: 7.5 🌡️ T: 20-25 °C H: 55-65% 🌊 🍗 💧 💼 🧠 🚀 Flushing 🎬Added 8 pics. Added timelapse and screenshots. I also prepared a timelapse of the entire week with some music 🎵🎵🎵 and weekly rate of T-H and VPD 📈📈📈
Likes
24
Share
@EBPbyEVD
Follow
Hi guys,i have some news for you and of course we are celebrating 👻🎃 1)Now the lamp works at 50% plus we are testing the sunset/dawn function. In fact, it simply reduces the power by 25% two hours before turning off and the same with turning on. I don’t know what this will give us, but the understanding that we are closer to nature warms the soul☺️. 2) It turned out that all the time I pour increased psh 6.4-6.8. The point here is that I prepare the compote in advance, respectively, I also lower the psh in advance, and for some reason in my sick head I was completely confident that Plagron ph down would keep the psh at the value I needed, but I was wrong. (Now it’s worth thinking about which of us is still down). Because of this jamb, we have a couple of unpleasant things, the first and most unpleasant thing is a delay in development, as well as all sorts of dirty tricks on the sheets, which they kindly told me that I was doing something wrong. Photos are attached. 3) Changed the composition of the compote. StartUp was removed. It was replaced by the Plagron Coco a+b and Fish Force base.
Likes
76
Share
Hey yall! Another week down. A lot has happened. To start, we up-potted from the red solos into my living soil blend that I have been working on for almost a year. It's so full on living creatures and beneficials. I used to have fungus gnats a lot when working with living soil, it's almost impossible to avoid. .. Then enters beneficials; we have black soldier Flys, persimillis predatory mites, definitely earth worms, most likely a mix of night crawlers. No more fungus gnats, I highly recommend using beneficial nematodes, cucumeris and persimillis predatory mites are excellent (swirski predatory mites are expensive). Just look at the Soil Food Web and identify what pest you have, then purchase their predators from a trusted insectary. Anyways I added another 200watt LED and spread out the plants in a 2' X 4' tent. It's extremely dry in my location and having the heat on makes the air even drier. So getting my VPD stable has been an immense challenge. Right now Also we need to be able to add VPD or at least GD needs a built in calculator to help folks with VPD, Vapor Pressure Deficite. As of right now I am sitting at 0.85 VPD, so pretty good for today. I have 4 humidifiers and have had to hang moistened towels on the doors of the room I am growing in. It literally has been a huge challenge to keep the humidity high enough for my VPD to be in range for the young plants I have now. Good thing is my current humidity without running any humidifiers is perfect for the flowering stage, so I can't wait to move this along. As for topping and training; like I said I really want to move these ladies into flowering sooner than later. I have several reasons to do limited training so I can limit my veg time, also getting this crop done as fast as possible is best for my set up. Until I can get a larger house 🏠 😩 because we got a baby on the way 👶 so need to make space. I have made compost tea twice this past week, wetting the soil and also spraying the leaves. My sprayer broke so I ended up pouring the tea on the plants gently, I got worm castings on the leaves lol. Gently rubbing that off once they dried. Also I applied the tea at night. My tea recipe: Reverse Osmosis water, 2 to 4 gallons I bubble that with added minerals for a day Add 2-3 cups of Activated worm castings (To activate the castings I added about 3 gallons of high quality castings with what I consider to be nutrient amendments, SO I add = kelp meal, neem cake, organic coconut flour, organic corn meal, organic wheat flour, and organic cold milled flax seeds and let that sit for a week then add about 2 to 3 cups of that mix to the tea) I also add biology from about a cup of 2 different soil mixes I have around my compost bin, just trying to get a more diverse biology by adding those two different soil sources. And mind you the grow beds I took the soil from has been organic for many years and has a large amount of beneficials and tons of excellent biology. Other than that I bubble that for 12 to 24 hours, with as much air as I can get. I use air stones but you really need to clean them off once you are done brewing. I also have an Air Lift with a large air pump that really works great, K.I.S. Organics sells one that works great or you can build one easily with with PVC pipe and a few adapters from any Home Depot or Lowes. Also I do add DynoMyco to my roots when up-potting. They are an amazing brand that has backed up research, I think they have more propagules per gram of two strains they identified to work great with cannabis. Now having said that, each individual phenotype out of each individual and specific strain/cultivar is going to have different bacteria/fungal strains that it prefers and by growing the same strain, hopefully the same exact cut, and grow 3 to 4 cycles before you truly have the mycelium networks built and fully functional. What I am saying is stop throwing out "used" soil and go over 7 gallons, bigger the better for biodiversity. Stop buying "new" soil, amend your previous beds and pots. You will see a huge difference. Hopefully I can show you all of this with my Grow. Anyways please feel free to ask away any questions! This grow is about saving money 💰 🤑 and growing the best clean medicine as possible.
Likes
42
Share
Spotted some budrot again. This time I had enough of it and didn't want to risk further rot, so I decided to harvest them and not let them flower for another week. Forgot to take pictures before the trim, they look silly now without the support from the copperdreads and rubberwires haha. They had 8 weeks of flowering, I'm glad that 1 out of 2 came out nicely. The other one is just another regular looking outside plant lol. I always give them a first trim, so the buds can dry better, faster, safer. After some days or maybe at the end of drying, i will trim them again. You can expect the final update with pictures between 7 to 14 days from now. ps, Somehow the beautifull colors from the better plant doesn't show properly when filming or taking pictures, neighter am I a professional photographer. But ill promise to take better ones, once the buds got the final trim and got dried.
Likes
5
Share
@Del_grow
Follow
Well I let them go on for another week in the end and I don’t know whether I’m just used to the smell but I definitely have noticed a decline in the loudness of these girls. I’m not ‘flushing’ as much as just giving them water and terpinator for the last couple of weeks to help them fade and finish off. More amber trichomes than I usually have, so these are perfectly ripe I’d say. The additional lights I added to the bottom of the plants definitely worked in maturing the buds but they also made them foxtail and push out pistils and seemed a bit forced. Also needed to account for the extra heat that 3 x small LED strips (approx 25w) so I decided as I wound down the main light to 10.5/13.5 I would turn those off entirely for the last few days. Decided to harvest all the plants together simply because it makes my life easier, believe it or not? Even though the Gorilla Zkittlez could’ve perhaps gone another week even. Oh well. Drying and curing is always an anxious time for me and the aromas are not as pungent as I’d hoped, but let’s hope this bud comes out nice because as this has been a long run due to the cold weather hampering veg early on.
Likes
42
Share
Hi people! who was surprised that I had to tie it?)) the buds are just huge! and already at this stage they are strong as stone! and they still keep growing! and yes! I also gave her overdrive !!!))) probably my favorite fertilizer! I love her effect! how it affects the buds! and how quickly you can see its effect. I'll show you Overdrive's work next week! if you haven’t dealt with this booster yet, you will be pleasantly surprised!
Likes
8
Share
Welcome to the second week, the plants continue to grow steadily and healthy. The temperature in the tent is a steady between 22 and 25 degree Celsius. I am beginning to add my nutrients to the water. I use Canna, I always start with the CalMag additive, and from there i add the proper nutrient for the plants current phase. Its a bit difficult to type in the exact values of what I use in the diary, so I will have it exactly written in the Week comments most likely. I prepare a 10L watering can, there i add CalMag, and after that Terra Vega. As this is the first dose for the plants, i start off easy with 8ml/10L, that water should suffice for the next two days. After that is used up, I will raise that continuously. Im happy with how they are growing. Thanks for everyone who’s tuning in and have a good day :)
Likes
293
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Plants growing good, look happy and healthy. I've a good surprise with how growing good with the Tropicana, same structure, same size, will be good for the scrog. I've reorganized the tent after harvest of other plants, Down the supply of lamp and Filter Fan Kit. 💪 Have been topped and did a defoliation 🍃 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 0.5 l Water + Roots + Grow + Zym (1 + 4 + 1 ml/l) 0.5 l Water + Roots + Grow + Zym (1 + 4 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 23% 50 cm Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Gorilla Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/gorilla-cookies-fast-flowering
Likes
3
Share
This week it's all about the 8 White Widow clones, rooted well in shallow water bath with .5ml pH perfect Grow in the water. Long roots sprouted through the rockwool and they didn't seem to be inhibited by the 50w led. Now transplanted into their 1L pots with fresh soil substrate, no additives. Transplanted 2 clones into rockwool now in 1 pot, see how they (Cerberus) develops. Harvested the clone cuttings on 24/8/2020, took approx just over 2 weeks (17 days) to develop the long roots seen in the pics above. Kept the water feed fresh every 3/4 days to prevent algae build up. Switched to 12/12 11/9/2020 Unfortunately, I had to pull this grow, it was painful to ditch the plants as the grow was going well but i had to move house and couldn't take them with me.
Processing
Likes
5
Share
She's looking very happy and healthy,let's see how this wonderful lady performs,looks like she's not gonna be very productive but always quality over quantity. Hope you guys enjoy. This lady has started the 4 week since planted on August 26th but also it's the start of her 1st week of flower,let's get the job done! 🔝💎💚✌️
Likes
15
Share
Week 2 : quite an easy week, just maintain Temps and plain H20 feeding... True leaves poped and looking fresh 👌. I only water every Second day or once top soil is completely dry..overfeeding is a very common mistake at this stage.. So I try my best not to do..
Likes
19
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D70/B08 - 24/01/24 ⚗️ 🌡️ 🌊 🍗 💼 🧠 pH is finally stable on the lower side (hopefully) 🚀 The Tent-X is on its way, I can't wait to get it.. 🎬 Added Timelapse video ________________________________ 📅 D71/B09 - 25/01/24 ⚗️ EC: 1.2 pH: 5.6 🌡️ T: 23 °C H: 45% 🌊 🍗 💧 💼 I put T-H Sensor of TrolMaster on the SCroG net 🧠 🚀Tent-X from TrolMaster received, I'm going to set it up tomorrow 🎬 Added Timelapse video ________________________________ 📅 D72/B10 - 26/01/24 ⚗️ EC: 1.2 pH: 6 🌡️ T: 23 °C H: 40% 🌊 Added 6L 🍗 Added Bloom A-B - CalMag - Big Bud - Bud Candy - B52 💼 Tent-X set up done ! 🧠 It works perfectly and as I just see so far, from now on, I'm going to experiment a new way to grow ! 🚀 🎬 Added Timelapse video and Set-Up videos and pics ________________________________ 📅 D73/B11 - 27/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 40% 🌊 🍗 💧 Added a little of pH- 💼 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D74/B12 - 28/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 35% 🌊 Added 4L 🍗 Added CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 Added some pH- 💼 🧠 🚀 🎬 Added Timelapse video and 4 pics ________________________________ 📅 D75/B13 - 29/01/24 ⚗️ EC: 1 pH: 6.0 🌡️ T: 23 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse video and "TM+ Pro" App screenshots. This is the app used to monotoring the Tent-X controller ________________________________ 📅 D76/B14 - 30/01/24 ⚗️ EC: 1.2 pH 6.1 🌡️ T: 18-26 °C H: 30-55% (from now on, I'll put the Min-Max values of T-H as I can easily read them from the app.) 🌊 4L 🍗 CalMag - Bloom A-B - Bud Candy - Big Bud - B52 💧 💼 I added a Humidifier as the H falls down to 30% 🧠 With the help of Humidifier, according with "TM+ Pro" app, I got the perfect VPD (Vapor Pressure Deficit) rate !! (see screenshots) 🚀 I have to face a very low rate humidity of the external enviroment 🎬 Added Timelapse video and T-H values daily graph, and perfect VPD from the Tent-X controller ________________________________