Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The flowers are in maturation, look already end approaching, I given only 1 time water this week, I check trichromes, 1 time per week, For moment almost milky. Maybe end in 2 weeks. 💧 Give water each 2/3 days. 1,5l Water + RQS Bio Flo Pack PH @6 - Bio Flowering Booster Pack Thicker Flowers 1,2 ml/l Bigger Flowers 1 ml/l Sweeter Flower 0.8 ml/l 💡Mars Hydro - SP 3000 100% 57 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light RQS - Epsilon F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/620-epsilon-f1.html

Starting to see some frost not much but the smell is dank. Can’t wait to exhale the smell and hope it get me high as hell. This stage of growing is slow. I guess because you are always looking at the clock. “Is she ready yet”

This plant or this pheno is super frosty not really smelling like wedding cake more ..gassy Chem smell wit some sweetness like a creamy sweetness ....full on resin beast sticky icky ......super dense already and only 40 days into flower

The BIP started fading. The buds are pretty hard and dense. The smell is already Stunning 😮‍💨😵‍💫. Beatiful genetic From Perfect Tree

OVERALL: ~ Very happy with the grow, I really dialled everything in well this run. ~ She grew super fast, I put it down to the constant oxygenation of the rootzone along with consistent and constantly optimized light DLI and leaf to air temp variance. The extra Co2 helped push the plant to its limit in terms of heat, allowing it to push its hardest. ~ The lack of HST and Defoliation I feel let it finish faster due to lack of stress and stunting. The faster finishing time along with the big yield and efficient MarsHydro light, it hugely reduced my electricity costs per gram and freed up space much sooner for the next plant. ~ Turned into a very dense bush of buds, there is even smokable dense buds at the base of the plant due to the under canopy lighting (Not as dense as top canopy buds but still decent) ~ Ran a thin line between stressing the plant and letting it flourish. The buds came out big and very dense, also it's hard to see on camera but they're very frosty too (Prob from UVB) YIELD: ~ 145g (dry) in just 9 weeks from seed. ~ 753g (Wet) ~ 0.91g/watt GENETICS: ~ MSNL - Gorilla Glue Auto ~ my favorite strain, as you can tell by my username! STRAIN REVIEW: ~ Heavy hitter, like an indica but has some of that "feel it in your face" sensation of a strong sativa. Not as heavy or as strong as other GG#4's I have smoked, which would make me question the genetics used to produce the auto version. I will wait till after a cure and judge it again. TRAINING: ~ No defoliation or HST (Bar last week for pics) ~ A little LST and leaf tucking but largely just left the plant alone to do its thing. I felt chopping healthy parts off the plant would slow the plant down and leave it with less chlorophyll to photosynthesize the light. ~ I did prune by lightly plucking dead leaves away, when the plant was ready to let them go easily. DRYING ~ 20/21'C 50% RH with air circulation. ~ Homemade Drybox made using: 2 x Bankers Boxes ~ 2 x USB Desk Fans ~ 1 x Carbon Filter ~ 6 x Clothes Hangers UPDATE: Day 5 after Harvest: ~ Fast dried some small batches, as we couldn't wait to sample. ~ Chopped off branches as some are down to 12% moisture whilst bigger buds are up at 18%. Moving to paper bag for couple of days to even moisture out then transferring to jars CURING: ~Curing in jars 3/4 full. ~ Dark closet/18'C/50% RH ~ Jars burped once Hygro passes 65% and sealed when it drops to 58%. ~ Stabilised it at 62% and after 2 weeks I'll drop it some more and stabilise it at 58% to bring out more of the flavour. ~Sitting in jars with Boveda 62% at this stage. ~ Already tastes and feels great. WATER: ~ Condensed (Starting at 40ppm) ~ Disinfected prior to adding nutrients etc. (Using COOSPIDER UVC - 253nm & 187nm bulb) CLIMATE: ~ Ambient Air Temp = 29'C ~ 28'C LST ~ Leaf to air temp variance of between 1'C ~ Night Temp = 22/23'C ~ Day/Night temp differential 6-7'C ~ Under Canopy Temp: 26'C (Day) ~ 21'C (Night) ~ Relative Humidity = 50-60%RH (Avg. 55%RH) ~ VPD = 1.45kPa (Avg.) ~ Co2 ranges from 900ppm to 1500ppm (Avg. 1200ppm) AIR PRESSURE: ~ Ambient Air Pressure (outside tent) = Mean Avg. 1010 mbars (101 Kilopascals) ~ Actual Air Pressure (inside tent) = Mean Avg. 1005 mbars (100.5 Kilopascals) ~ Air Pressure Differential = up to 0.5 kPa range between inside & outside LIGHT: ~ UVB (High intensity @ 45cm) ~ 2 hours daily mid light cycle. ~ Warm White 3000K/White 5000k/Far Red (660nm) ~ At plant canopy = PPFD 900-1000umols/s/m2 ~ Lux 45,000-55,000 ~ Daily Light Integral 55-65 ~ Under canopy lighting ~ Blue (460nm)/ Red (630nm) NUTRIENTS: ~ Mostly Advanced Nutrients (For base nutrients and most additives, as only company I could find scientific data on) ~ Canna (For Calmag Agent and Cannazym) ~ Plant Success (Great White Mycorrhizae) ADDITIONAL GROW TECHNIQUES: INFECTION PREVENTION & CONTROL: Infection control practices i.e ~ PPE, Alcohol Hand wash ~ Gray room outside tent, ~ Carbon filter ~ HEPA filter ~ Plasma Ionizer ~ Inline UV-C germicidal bulb ~ Also using an additional higher powered COOSPIDER (UVC) 253nm & 187nm bulb, to disinfect the gray room outside of the tent once a week for 30 mins. ~ Ozone (o3) gas that is produced using the COOSPIDER, is then directed into the tent to further control any unwanted pathogens. ~ Ed Rosenthal (Zero Tolerance organic pesticide), sprayed once a week as preventative measure. On hand for heavier use (Once every 3 days before lights out for 15 days) in the case of an outbreak (No outbreaks yet, due to aforementioned preventative measures)

Transferred 2 plants to 7gal on Day 17 and apply lst......on Day 18 nod start aiming for the sky🙂......topped on day 21

Start Flush

16/04/2021 Llego el momento de iniciar temprano un nuevo cultivo de suelo vivo. Para ello comenzamos armando el sustrato (200L) para posteriormente dejarlo pre mezclado y con su vida correspondiente para recibir a estos 4/5/6 esquejes que van a ingresar. Se instalo el sistema de riego sensible de Blumat Tropf con sus dos zanahorias y 5 puntos de goteo por cada una, con apenas dos Dias ya observamos como se germinaron esas lentejas que van a producir ese cover crop y alojar a todos esos hongos benéficos de sus raíces hasta esperar que lleguen las plantas. 21/04/2021 Las lentejas ya germinaron de manera correcta, se colocó el mulch orgánico y el sustrato continua con una muy buena humedad por lo que se estima que la vida debajo se está poniendo interesante. 27/04/2021 Hoy sigue a la espera de una nueva luz Quantum Board 240w para este espacio, de todas maneras se colocaron las plantas en el espacio de cultivo para ver cómo queda la dispocion!

Linda genetica de royal queen seed más para climas controlados

The start of week 5 is going well. Blueberry is smelling nice and my seedlings should be showing preflowers soon.

Some wrong i do .... But She Is strong and grow well ... The EC for grow.go ti 3000 but only 2 day ... After go to 900 .. and now After 5 day 700 ... She grow very well .. i want Stretch so much i have put the lamp on 80%.... ??? .... Need to grow in tall .... I dont have ir light ...

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We were expecting around 600-700grams but got just over 540.. not unhappy at all lol..the berry terps are very strong with this batch, we've grown this stain several times but this is our first grow under the FC-E6500, buds are hard and resinous. This was a great harvest and should get us all through the next few months..Thanks as always for dropping by and happy harvests everyone!!! 💡🌱 ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable (and adjustable) light bars and driver 🔌 Diodes: BridgeLux chips (3978 count) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Fresh rez swap and she flaring all over again. Nee pistols shooting, hopefully get another 15% over the last 2 weeks

What a great week it’s been!today is day 65 from seed!! One of the Forbiddin Runtz got it’s last feeding on Friday and will get flushed for 2 weeks and will be ready for dry and cure! The rest will still remain getting same dose of nutes the rest of this week and most likely into the next! This batch felt like it went so quick ! Hope you all enjoy an watch out for next week !

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Cake Flavur Frost

hey guys! I decided to baptized my two ladys and add some visual markers to see wich is witch easily! Batman = CBDurban / black bucket Robin = Afghan / white bucket After watching a tones of videos i finally decided to apply some prunning techniques. Batman received a topping to have for cola's, and Robin was FIM and i remove 2 big leaves that was doing lots of shadow! You can see the hole process by picture and videos! Thanks for following! And please subscribe!

Graduated, and am off from work for a few weeks, so went overboard on photos. Plant is doing well, leaves are starting to turn yellow (strain trait). Can't wait for the harvest and being able legally gift my xmas ornaments to my cousins during our "cousins walk" at our family xmas party.

Going to run 6 different fast buds strains this time.Dropped the seeds in the water and now a wait for the tap roots.One of the seeds is from Papaya cookies last run I found a single perfect seed and hopefully she grows as strong like the plant she come from :). Germinated all seeds in RO water at room temps for 24 hours and gave a little tap with a spoon and they fell to the bottom.I left them in the dark in water for 48 hours total and placed them in a warm wet paper towel in a sealed container for 24 hours.The seeds all developed nice tap roots 1/4 inch to 1/2 inch long and I planted in 5 gal pots.Using a 3 inch layer of fox farm ocean forest on the bottom and the top layer is Pro Mix.