I put the plants under the Electric Sky 180 V2 I kept only 4 plants because one was growing really slow compare to the others and another turned out to be a automatic plant so i took it away as well. I am keeping 2 phenos of the Nanaz x BBC and 2 ot the Humboldt Headband.

I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

7 Days in, 9 since planting. On day 1 i did a time lapse and found that my fresh bagged soil came with bugs in it. got some 'Jakes' killed the bugs, but over saturated and by 5 of their life i found a bit of mold. lightly sprayed more 'Jakes' and turned on my clip fans.. since then the mold and bugs are 100% gone. the photos of the single seedlings are most recent.

Today, day 23 was the last repotting. Girls went from 11.6L to a 20L pot. Now there in the right place, serious things can begin ! I planned to top the girls on wednesday or thursday. It will depends on hos they will recover. Actually, it's my first time with smartpots. If smartpots have a lot of advantages, repotting is not one of them ! I made a mistake : the plants were 60% dry, and abviously, it was not a good idea ! It should be clearly moist. Nextime I think I will water the girls 1 hour before repotting. I hope it will be ok and they will recover from this tough moment.... Will see in a few days 😰😨 Anyway, I have generously watered them right after repotting with no nutrient. Juste clear water with the right Ph. As they are in some brand new light-mix medium, I thought they have enough nutrient for a at least 2 or 3 days. D-25 : Everything is ok. Girls seems to have recover very well :) Anyway, I'll wait at least one more day before topping. D-26 : Topping the girls. Hope everything is going to ok... Also feeding the girls right after the top. During the topping process, the plants were reduced from 25cm to 12cm.

Everything is not as accurate as I would like to say, but I wanted you guys to see what I can do

📅 Week 13 | Days 92–98 📅 🌼🌸🌺 Flowering Phase 🌼🌸🌺 Day 98 🌞 – Oreoz 🔸 Oreoz is looking like an absolute showstopper this week. The buds are incredibly dense and completely frosted with thick, glistening trichomes – it almost looks like they’ve been dusted with snow. Resin production is off the charts, especially on the top colas. Trichomes: Mostly milky with some still clear – no ambers yet. She's not quite ready, but getting close. 🔸 Climate control has improved. Humidity started the week at 63%, but with the dehumidifier now running and all clip fans at full power, it's being maintained steadily between 50–60%. That little climate shift is definitely helping – the buds are chunking up without any signs of stress. The slight 2–3°C increase in tent temperature is worth it. 🔸 Nutrients: 1 week of Overdrive (Advanced Nutrients) before the flush phase. Water intake has already slowed down noticeably – another good sign that the end is near. 📈 Current Conditions 🌡️🔆 = 27°C 🌡️🌜 = 20°C 💨 VPD Target = 1.4 - 1.6 💨 Humidity = 63% → Target: below 60% 🔦 PPFD = 900 µmol (12/12) 🔦⌚ DLI = ~38 🛠️ Setup (unchanged) 💡 Lights: 2 x Sanlight Evo 4-120 @ 90% ⛺ Tent: 120 x 120 x 180 🍯 Pot Size: 18 liters 🌱 Medium: Bio-Bizz Light Mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap water (EC 0.5)

What a run this was, harvested at day 70 of 12/12. Pheno #1 was the iciest from the start and hasn’t disappointed ever since. Amazing and beautifully stacked buds with and insane amount of trichomes! She looks truly amazing, very exotic bud structure too! The smells are out of this world with artificial cherry, cookies and gas terps. Can’t wait for her to be dried and cured for the final smoke test!

64.nap Valami nagy robbanás volt az ak47 lányokon.. Nagyon meleg van és szeretik 4 naponta itatomm őket Ma nagyon meleg volt 34fok a fólia sátorban gondolom több

March 24 - 30 Pretty mellow week with final prep for leaving them unattended for 5 days. Drizzela is showing signs of a lime green discoloration in a small area to keep an eye on. Blumat is steady and dialed in. The plan will be to water over the Blumat system with recharge mixed in which will prolong calling for water from the reservoir.

Prepared the soil 12 days ago and prepared the pots at the day i put the seeds into glass of water. I used 50% Dope Light and 50% Coco as light mix for the top layer I used 50% Dope Soil and 50% Reused Soild + Additives to reactivate my old soil.

Day 22: Honestly didn't think I would have made it this far. The girls are looking great minus a couple of issues. I have over watered them and over fed too! Not to mention trying to LST too early. I will wait a bit longer before watering this time. Day 23: MORNING - They were super dry. I have been over watering a bit so I watered maybe 1/2 gallon for all 6. I also did some more LST and took 1 large fan leaf off of each plant. I will update again before lights out. Day 23: NIGHT - The girls are responding very well to the LST. I don't think they are liking the 80°. I am starting to have issues with lower humidity again. I need to try and figure some sort of ducting out or possibly even get a small AC unit for the grow room. Day 24: MORNING - I removed a couple more leaves that were covering potential bud sites. I have also done a partial main-line on the smallest girl. It looks to be already showing pistols. I've had to open the tent with a big fan blowing directly in with the humidifier behind it. The girls were getting hot and dry. Day 24: NIGHT - Well 5 are showing to be female. The biggest plant is showing no signs of sex. I am guessing it will be the mystery seed. I will be doing no more LST to these ladies for at least a week or better. I think I have stressed them out enough the past 2 days. Day 25: These girls are very resilient!! I tortured them all weekend and the one I nopped off to do a sort of mainline grew by 20% at least. Day 26: It is the official 3 week mark today and the girls are starting to flower. I tied em down to get light to all bud sights. I will 100% not touch them unless they need it from this point!!!! They are soo small and I need not stunt them any more!! I have removed the Mystery Seed as it looks to be a male and I do not want to take the chance!! Also fed and watered today. Only 200 ppm for the feed. Day 27: Nothing new to report. These girls are gonna be tiny :| I must've stressed em too much too soon :( Looking good though I think! 💪 Day 28: I never do what I say. Dumb! Broke main stem on one of the best plants. Taking it as a lessons learned. It's been two hours and she looks SICK! Oh well.

Hi Growmies, Here we are at week 11, and our botanical star continues to astound with her growth. The stretching phase has persisted throughout the week, each day adding a bit more to her stature. It's as if she's reaching for her personal best, and I'm here to cheer her on every step of the way. As the buds begin their own stretch along the colas, it's time to introduce Green Sensations into her diet. This should give her the extra boost she needs for this critical phase of development. Her thirst is growing, a sign of her expanding needs and vigorous metabolism. It's a balancing act to match her hydration requirements, but one that's deeply rewarding. I can't emphasize enough how smooth and stress-free this experience has been. There's a certain peace that comes with tending to a plant that asks so little yet gives so much. If the yield is anywhere near my usual harvests, I might seriously consider making a permanent switch to soil and the Plagron lineup. It's exciting to ponder the potential of a new cultivation method. This journey has been one of simplicity and satisfaction. The connection between grower and plant, the quiet anticipation of each new stage of growth – these are the moments that make it all worthwhile. As always, a reminder for my fellow plant lovers: use the code ZAMMIGD2023 at Zamnesia's online store to get a 20% discount. Sharing is caring, especially in our tight-knit community. Stay tuned for the next update. We're on this journey together, and I'm grateful for every step.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

She's clearly not happy. She hasn't been happy for a couple of weeks looking back at past weeks.

She's doing her thing this week. A little too far from the lights (1m) because of the Pineapple express. But she's got to deal with it 😋

Sky Walker ~~~~~INDOOR~~~~~ DAY 141 Above Dirt 💬SUNDAY 01.13.24 - So this is the update that I did not have time to do over the weekend, the girls are bouncing back from the hard time I put them through last week, and the flowers are starting to chunk up along with more foliage, however, there will be no more defoliation until we are close to completion, for now, its just water, and wait, allowing the Gaia Green to do its thing, the light is at 100% and the girls love it. ~~~~~~~~~~~~~~~ 🌱Sky Walker 👨‍🌾🏽Sativa Jones 🌤️@Medicgrow420 SeedBank Seeds 📝@gaiagreenorganics 📝Bokashi Biochar ~~~~~~~~~~~~~~~ 📝 Skywalker OG Strain is a top-shelf Indica dominant hybrid. It is a cross of Original Amsterdam Blueberry, OG Kush, and the indica strain Mazar from Afghanistan, and is best known for its super potent effects and sky-high THC levels.

In the first week after transitioning to a 12/12 light cycle, I removed all restraints and supports to observe its growth, comparing it with the Permanent Marker strain. The plant looks vibrant green and has already displayed female signs 🌿. Exciting progress ahead! 😊

Strain: Lemon AK Breeder: Fastbuds Started from Seed Feminized Autoflower Seed Count: 5 Week 3 11/10/2018 - 11/16/2018 Nutrients are now at 100% strength and plants are all growing nicely and showing good color. Plant #2 had a curving stem issue so I've added a small bamboo stake to straighten her out. After 3 days it seems to be working. Also, I brought the light down to 24” now that the seedlings are well established and used to the spectrum. Speaking of stems … the Fastbuds description mentioned weakness in the first few weeks and the need for support. I've had 2 6” fans creating “windy” conditions since the seeds were planted and I've added some silica to the nutrients to strengthen the plant structure. So far it seems to be working because all of the plants (even the one with "scoliosis") seems to have good support and thickness in the stems. The plants have doubled in size this week and now range from 4” - 7”.