Likes
Comments
Share
LAS NIÑAS VAN GENIAL, EN UNA SEMANA MAS O MENOS LES COLOCAMOS LA MALLA SCROG Y LAS MANDAMOS A FLORA
Likes
141
Share
Harvest Time of Fast Version B Strain and Welcome to : -Designers Club - Special Thanks to John for hopping through my Messages to Join The SSSC/DP Photo C8ntest The Project was Supported by Narcos Seeds to give the Strain the Perfect lifespan it could Deserve . Light used for The Contest Grow : Tenty Pro x4 200w in a space of 60x60 Homebox Ambiente Tent. Preparation Before Harvest : 5 Days without Feeding / 2 Days of them Complete in the Dark . Enough Talk from me , just Enjoy youre Seats and be a part of The Designers Club . Good Luck to Everybody and Keep up Growing !
Likes
22
Share
@Cannabud
Follow
This week has been slow. Weather has been really bad. Superskunk is now dry and I’ve started the cure. Dry weight came in at 42g so I’m happy with that. I had a little sample tonight and it wasn’t a nice smoke. Snow Ryder shouldn’t be to long now but the weather doesn’t look to good this week. The second super skunk isn’t still going strong. I found a couple of caterpillars on her but not much damage.
Likes
6
Share
Flowers coming along well, with frost now developing. Nutrient strength increased now they're gonna be eating a lot more. Remo grow reduced slightly now they're slowing their growth, but Bloom and AstroFlower have been increased to favour PK for flower development. Day 28 will be the last day feeding Growth Tech Liquid Silicone as it takes the longest to completely flush out of the plant. I never feed silicone later than this in flower otherwise you risk hard, black ash with a horrible burn in the end.. More leaves have been stripped here and there to slow growth and to allow the light to penetrate deeper, uncovering flower sites. Leaf stripping is a great technique to stunt the growth of selected branches, allowing the others around to catch up and meet the top of the canopy more evenly 🦊
Likes
39
Share
It's day 40 for The Tropical Ice Cream One and she has fully recovered from last week's topping. I'm continuously training the 8 mains to keep a low profile and also taking off leaves here and there. Will probably give her a couple more days before I'll flip to 12/12, would love to veg her for longer. Gave some BTI and Nematodes to deal with the last surviving fungus gnats, hopefully for good. - Temperature: 27°C - RH: 66% - PPFD: ~480 Thanks for checking in and see you next week! Happy growing 🌱
Likes
4
Share
@blaze_fpv
Follow
I came back to the fridge after 6 days and stretch was running massively. They grew like 20cm in 6 days I changed my climate to: 27° C 60% rlf in order to adapt to early flower Day and Night same 45% light about 580ppfd Still running the water in a circle. Adjusted the scrog a bit in order to fill the space more They eat like 1100ppm CO2 an hour 😎 __________________ Update: last 2 videos show day 8 of flower ,🤙🏼 Decided to give them a heavy defoliation due to it being a closed loop system and them emitting tons of humidity. So far so nice 🏼
Likes
41
Share
Day 63: Watered the plants 0.5L with nuts, 4L total, 919 ppm, 1955 us/cm, PH 6.4 Day 65: Watered the plants 0.5L with nuts, 4L total, 780 ppm, 1661 us/cm, PH 6.4 Day 67: Watered the plants 0.5L with nuts, 4L total, 729 ppm, 1563 us/cm, PH 6.4 Day 69: Watered the plants 0.5L with nuts, 4L total, 905 ppm, 1925 us/cm, PH 6.4 Next irrigation's without nuts, flushing next week 1 plant with foxtails (good ones)(small too)
Likes
3
Share
Tuesday Ok so the plants are doing really well. One of the kalini Asia plants is in the only regular pot I’m using now. It’s a little larger than the AutoPot XL’s so therefore the plant is slightly bigger but spread out because I topped it a while ago and today I took all the bottom leaves as well as quite a few of the lower lateral branches that well small and weak. Hopefully this will encourage the energy to where it want it - The main growth tips! I think it was the other kalini Asia that is in the AutoPot XL that I ended up ‘super cropping’? Do correct me if I used the wrong term. The main growth stems were quite a lot higher than the large lateral branches so I squeezed the stem with my finger and flopped the main colas over then taped them and tied them to support them. The canopy is MUCH more even across all plants now. They look a bit bent over at the moment but I bet when I look tomorrow they are all facing the light again. Magic! They are def in the stretch phase now. They are growing like crazy. I’m really glad I did the nasty job of pulling each plant out and tying it down and cutting off the shit that won’t grow anything good. Oh I also gave them a watering from the top using lots of microbes (ecothrive biosys) and molasses dissolved into warm water. The res was basically empty and honestly the AutoPot XL’s don’t even look wet at all on top even though they are getting all the water they need. They don’t react negatively when I occasionally water goodies in from the top so it’s all good!!
Processing
Likes
4
Share
The weather has been gorgeous here on the West coast. After 2.5 weeks of veg in the Stealth Box, the Strawberry Cough Auto was showing signs of pre-flower. I planted this girl 04/16 into a 50 gallon pot in full sun. The Purple Grizzly Auto seedling is growing quickly. She’ll be ready for transplanting outside into the sunshine by next week.
Likes
10
Share
@Aleks555
Follow
Всё норма , наш Himars M142 растёт хорошо . За неделю вырос на 20 см . Удобрение сделал сам ))) 0.5 кг чая грузинского залил 0.5 литра воды , настоялся 2 часа розбавил на 2,5 литра воды и этим раствором поливаю . И ещё одна удобрюха - 2 банана перемолол в блендере затем эту кашу размещал в 2 литрах воды , процедил и 2 дня настаиволась это смесь ,ей и поливал . Everything is fine, our Himars M142 is growing well. It has grown 20 cm in a week. I made the fertilizer myself))) I steeped 0.5 kg of Georgian tea in 0.5 liters of water for 2 hours, diluted it with 2.5 liters of water and watered the plant with this solution. And another fertilizer - I blended 2 bananas and placed the mixture in 2 liters of water, strained it, and let the mixture steep for 2 days. Then, I watered the plant with this mixture.
Likes
48
Share
@PapaNugs
Follow
This was a week. The drama at the beginning was one of the fans falling down onto my gorilla cookies. It snapped a branch off really bad but the girl hung onto it by threads. I duct taped her up and somehow took. 😎😢 I defoliated and did a little lst on a couple of the girls. Nothing major. Also increased the light to 80% now. I think I'll stay there until late flower when I switch to 12/12. I also added blocks to a couple of the girls to make the canopy level. That put the light at 15" as recommended by Medic Grow. Strawberry Banana is growing ok. I added one row of blocks to raise her up. Lst tied one branch off to the side. I'm hoping she starts to pick up in the week. I see potential but we'll see. Dimmed to 80% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
4
Share
Processing
Likes
4
Share
Sadly I had to cull the bigger nicer one this week, she started producing balls. Was gonna just pluck them until I noticed how many branches had them, she was fed to the piggies. The small ones catching up, gonna keep a very close eye on her as I've heard manbearalienpig has had herm issues, and now I've witnessed it in this cross. 3BOG is known to give dense nugs, so hopefully out of the 2 seeds ill get some buds.
Processing
Likes
47
Share
@rhodes68
Follow
11/3 Week 6 Watered roughly one gal each @6.5PH, Fish Sh!t 5ml - Karo 1 tps /gal Flower Girl still in the pot, no deficiencies I can see, well new ones :) Mag-Sulfur Foliar spray (Epsom Salt 1tbs/gal) on all as leaving cal-mag out this time Moved the two healthy plants to the center of the light, they can use it, the others might respond well to lower levels. 11/4 Better pics uploaded Placed Brandy on a block of coco coir to bring her canopy up to Layla's level. Moved Maggie to the corner she has a stretch going that I HOPE is ending and I dont want to set the lights to her. Watching that plant carefully Considering a PK boost watching only Layla for that as the other two ... well hell what can they tell me? 11/5 Working to getting the canopy under control with one stunted plant and another stretching like crazy. Put a block under Brandy to move her up level with Layla. Trained down Maggie this growth needs to end, it was already stressed. Still giving light pref to healthy plants. 11/6 Raised lights three clicks, increased extraction, showing some heat stress in those edges. 11/7 Good results on the heat stress curling has ended. Noticed some improvement also in the tops of Brandy and Maggie, so raised lights another couple of clicks. See if it continues, coming up on a make or break feeding in couple of days. update Foliar Feed All - Epsom Salt 1tbs/gal Well Maggie's came today - To runoff- 1% peroxide - 5ml CalMag - PH 6.8 Hitting Sulfur as hard as I can. Before pics posted Brandy not dry enough waiting Layla just got fed but she got pics too as there are signs of Mag deficiency 1 gal 6.5 PH - CalMag 5ml - Fish Sh!t 5ml - Bio_Bloom 5ml as a PK booster JIC 11/8 Video of plants 24hrs after giving Maggie the h2o2 1% , think she looks better lets see how it goes 11/9 48 hrs after treatment and Maggie is showing great improvement, serious improvement in leaf structure and coloring. Pics at lights out tomorrow new week anyway. Brandy showing some improvement but its early. Canopy is level now so lights set to Maggie being slightly taller ***Last update before the new week.*** May have found ONE of my problems,certainly not THE problem, but one. I have been using lemon juice as a PH UP since we went organic late last spring. Because of all the problems I have been looking into a lot of things further and found that lemon juice begins to degrade as a PH up after as little as an hour. A 6.0 PH water gallon can go to 6.5ish in 24 hours simply sitting in a dark corner in a jug. One can imagine the variances in soil. Why I dont know but I am going back to chemical PH additives post haste in fact its already done.
Likes
3
Share
plants took flight. If we go like this now, this harvest is very fertile
Likes
36
Share
Just first Plant harvested 5.10- second big sister harvested And two Lil Sisters too..Now theyr already drying in room ....next update in few days cause our weather Is not going to be so good ... 8.10 some of dried buds already cuted.. And puted to glass jars
Likes
11
Share
@ElGrowLab
Follow
Friday is Highday… One Week to go Here are some expressions of my Grow. Except the drying I think there’s nothing that could go wrong now. This Week I only pour water to the plant. The next days no more water for the lady’s so they absorb the last nutrients from the soil Nice Weekend 👌🏻 ElGrowLab🍀
Likes
2
Share
Likes
64
Share
Overall, I am extremely happy with the genetics of the Auto Euforia and the general success of the grow. I always like to reflect on mistakes I have made, so let me lay them out here: I overlit the plant during veg, contributing to it's bushy nature. It grew well but this would be a waste of electricity if I was growing more commercially. During the last week of flower, my region of Ontario was hit with tons of rain and humidity. I took some steps to increase circulation of dehumidified air, but lowering 95rh to 65-70rh is still insufficient and I lost some control of the environment. The awful result was the start of mold in some select areas, particularly in the fattest buds and where leaves were cut away and petioles remained. This issue is not due to Dutch Passions great genetics, and is entirely due to a combination of an unseasonable environment and my own overconfidence. This mold was never clearly apparent on the outside of the buds, but I found it will trichomes scouting under magnification. This forced me to speed up the harvest and drying process. It also means that I have had to carefully grade the buds into those safe for smoking and vaping, those mold free but needing a second examination (will be rosin pressed), and those close enough to spots of mold to be only for for edibles. Any moldy bud was of course cut away and will be disposed of. Nevertheless, I have many ounces of fantastic buds, and will be making some nice pressed rosin based 510 cartridges. I will edit the harvest post with more information after the cure, and showing the various processing I will be doing. Happy growing! 🌱