Recommended
Likes
Comments
Share
My pictures seem to have re organized themselves, just give me a few here and I'll get the full rundown . So this week ( day 21-23) was MAJOR defoliating. What my first step is to start taking the largest fan leaves . My next step is about halfway through the canopy I'll stop and then I'll start working on the very bottom of the plant now at this stage in the game anything that doesn't even have a nice Bud site so a nice white hair sticking bud at the very bottom like shoots I'll just cut them right off. This is the first steps of a main line but I don't complete the actual full main line I probably will try it sometime soon just not this time. So you take off anything that is a small shoot coming off the main stems and then your next step is . STOP. It might be a minute it might be 10 minutes, 20 min , it might be an hour or more ( my tip is don't wait a full day I try and do it within the first 12 hours of starting it) but I always stop just to look at what I've done sometimes if you get going too quickly you can end up doing way too much. Stand to talk to canopy and look what sites are getting hit by light what places are these families beneficial to use for photosynthesis. Anything that is not doing as much good will be taken off and at that point I'll probably do another you know 5-10 minutes of defoliation maybe take one or two more shoots at the bottom to ensure what's left there is a huge fat cola that's going to give you those huge buds . After this you're going to want to do your best to support those stems that are going to hold a lot more weight as if the plant would have been with all the shoots so you're going to want to just make sure that you have staking in place or some sort of support system to keep them from flopping over a breaking them in the future because that's one thing yeah it's great but then it'll get to a point where oh no stuff falling over and then it's just more hassle than it is helpful. I got alot more pictures to follow this week so stay tuned !!!
Processing
Likes
14
Share
Man p4 is coming on strong after knocking of the longstanding p1 Queen of the crop. Crazy, I thought plant 3 was goin to be lucky to survive and she kicks booty! Another video up there 12 days in December cuts off about an hour ago. I have to say this week went pretty uneventful other than getting everything potted into their final 3ga pots. I'm trying to get the plants up to around 12" before flipping but getting anxious about it. If plant 3 wasn't so dang little I'd probably had flipped the ladies already... But they're still a bit short. I'm finding overcoming impatience is the biggest lesson I'm learning. Below is the transcribed daily notes you can find in the images above: 12/24 Measurements good, 3 still looking slow. 12/25 (Fed w/) 2 tsp/ga Big Bloom / 2 tsp/ga Grow Big 1/4 tsp/ga Clean kelp. Trimmed suckers off p2 repotted #3 1225 ppm tds, 4.43 ph out. 12/26 Humidifier wonky, got soil warming up to transplant but think maybe wait as soil still a little moist. Trimmed suckers off 4, rinsed all w/ph balanced H2O. 12/27 Humidifier ran out 12/ 28 Repotted 1/2/4 fed w 2tsp ga grow big/big bloom, 1/4 tsp clean kelp. trimmed 2x suckers off 1 b4 I thought about stress f/ potting. 1295 TDS ppm 12/29 trimmed 2 browning suckers f/ P3 12/30 cut low brances/suckers messed up leaves/babvies on P2
Likes
4
Share
@Fatbudz
Follow
in the first days of the little one I only used fishmix from biobizz to help in the development of life in the soil which already has nuts itself. biobizz light mix 🌱🌱
Processing
Likes
30
Share
THURSDAY 11/29: I foliar fed a few times and did a photo session. Beatrice has given me no trouble at all. I am now a true believer in silica supplementation. I've never had plants with such excellent stalk turgidity. She is strong enough to support truly massive buds. FRIDAY: Beatrice is gonna be a buxom gal! She's stopped growing and is spending all her energy popping pistils now. Love it. I foliar fed her and rotated her. SATURDAY: FIMing is so unpredictable..but I like surprises.😁 Her third cola isn't catching up with the other two....looks like they will possibly all merge into one massive bud. I'll spray her with ph'd spring water for another day or two to rinse off any residue and discontinue foliar feeding on her now. I watered today with ph'd water, bud candy, terpinator, calimagic, and a little boomerang. She's directly under a 660nm spot and the 3000k quantum board..no sign of light burn, so I'm lowering it another couple inches and monitoring. SUNDAY: She's been very vigorously growing, she was fast to flower, she's got a really nice fragrance, and her structure allows all of her buds to get good light, but I'm a little disappointed that she hasn't shown me any of those special colors I see on other FB Blackberry diaries at week 6...😟 MONDAY: She was still plenty moist so I'll hold off for another day on nutes. I rinsed her with ph'd spring water again today a couple times. No worries...humidity has been below 30% for a couple days now and airflow in the tent is awesome. TUESDAY: I fed her a tiny dose (8oz) of ph'd water with some Fox Farms bat guano, calimagic, and boomerang, and misted her with ph'd spring water.
Likes
21
Share
Some nice red and pink hues appearing around the buds and the smell is really lovely, not overpowering but it is a pleasure to stick your nose in the tent and just inhale the aromas. Getting close to harvest time (10-11wks), will be cutting back on the nutes and begin flush feeding and watching the trichomes closely for any changes, they still look clear. Expecting her to start autumning off anytime soon. 18/10 Gave her a water feed 1.5 ltrs with molasses diluted ec 60ppm 6.8 pH
Likes
2
Share
Day 21 Shes looking a little better as her new growth is much better but shes still lacking some colour hopefully soon she will full take off. Turned the auto-pots + air-domes on to get water and oxygen directly to the roots 3 days ago. Feeding Cropsalt at 5.8ph, really enjoying it atm just look at their colour😍
Likes
50
Share
well everything is going alright. nothing to complain about. destroyers are getting a lighter shade in the new growth but still pretty much healthy, just a more natural sativa color. maybe around this time i could have thought about topdressing but i’m more inclined to let them go on with straight water just to see how this mix runs till finish with just water and no extra inputs. though who knows i may just decide to topdress tomorrow haha others seem happy and healthy as well. watered the dinachem pot yesterday with about 4l of distilled water and destroyers got 4l each 2 days before that. caribe and cannalope pot is still pretty heavy. see y’all next week edit; yesterday we had a blackout so timers were set back an hour so i guess when i opened the tent today light had just turned on because they were holding a less intense praying pose so just checked back 3 hrs later now and looks fine now. added those photos as well.
Likes
29
Share
------------------------------------ ~SEEDSMAN PEYOTE GORILLA~ ------------------------------------ Peyote Gorilla is a cross of Gorilla Glue #4 (Chem Sister x Chocolate Diesel) and Peyote Purple, a colorful phenotype of Bubba Kush. The potent, medicinal effect of the Gorilla meets the stimulating and uplifting high of the Peyote Purple. With a flowering time of around 70 days Peyote Gorilla has a typically Indica structure, medium-sized with large, broad leaves. Yields are exceptionally good; indoors growers can expect to yield between 500 - 650 gr/m2 while outdoors as much as 1500 gr/m2 can be realized. Resin levels are very high and this means that it is very suitable for making extracts and concentrates with. This strain's scent is sour with lemon, petrol, earthy and woody notes and these properties are reflected back in the taste. THC production is very high at between 22 - 26% with CBD at just 1%. The effect is a very potent, uplifting high which gradually evolves into a physically relaxing state that will be almost certain to ease any aches and pains. __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ -Strain Characteristics- BREEDER/BRAND: Seedsman PRODUCT TYPE: Seeds THC GENETICS: Gorilla Glue #4 (Chem Sister x Chocolate Diesel) x Peyote Purple (Bubba Kush purple pheno) VARIETY: Mostly Indica FLOWERING TYPE: Photoperiod SEX: Feminized THC CONTENT: 22 - 26% CBD CONTENT: 1% YIELD: Indoor: 450-600 g/m2; Outdoor: 1500 gr/plant PLANT HEIGHT: 80-160 cm GROWS: Indoors, Outdoors FLOWERING TIME: 70 days HARVEST MONTH: September MEDICAL CONDITIONS: Fatigue, Insomnia, Pain, Stress TASTE / FLAVOR: Berry, Earthy, Fruity, Petrol, Sweet EFFECT: Euphoric, Powerful, Relaxing, Uplifting _________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________ THE SETUP: ~Planted into Jiffy Peat Pellets that were hydrated with de-chlorinated water with SuperThrive added then ph'd to 6.0 @ 80℉ ~Grown 100% organic in 10g fabric pots with Mother Earth 70/30 Coco/Perlite medium amended with 2tbs/g of Down To Earth 4-4-4 / 2 cups/g of Earthworm Castings / 1tbs/g of Dr. Earth Flower Girl 3-9-4, 1tbs/g of Dr. Earth Bat Guano, 3/4 cup of Down To Earth Azomite and 1 tsp/g Down To Earth Fish Bone Meal. ~24hr light cycle during Germination / 19/5 light cycle for Vegetation and 12/12 for Flower ~Straight water ph'd @ 6.2-6.8 when needed and weekly Compost Tea's. __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 9/27- Week Seven of flower here we go! She's looking good to go with her flowers stacking and her trichome production continuing to coat her flowers! Today she was given 1.5g of de-chlorinated water which was ph'd to 6.2 @ 72℉ which I gave her half through her drip pan (bottom chuggin), the remainder trough the medium. I also gave her pot a 1/4 turn. 9/29- Yesterday I didn't water her, only turned her pot and checked her over... Wow! She's really ramping up the trichomes making her flowers look like their sugar coated! 🤩 I watered her today with 1.5g of de-chlorinated water with 1 tsp/g of unsulfured molasses added which was then ph'd to 6.4 @ 72℉. The molasses will give the microbial colony some additional food as well as supplying micro-nutrients to the plant. I finished out the daily maintenance giving her a check over and turning her pot 1/4 turn to ensure she gets light to every inch of her. 10/1- Yesterday was a 'no water' day as her pot was still fairly heavy to lift. Today she was watered with her usual of 1.5g of de-chlorinated water which was ph'd to 6.2 @ 72℉. Her flowering continues to impress me with her trichome production covering her flowers with 'frost' she's a sight for sore eye's! 😍 The end of next week we'll be getting close to her wrapping up with the 'Finish Line' approaching by Week 10, but it will all depend on when she tells me that she's ready to go! 10/3- With Week Seven coming to a close we're going into that last 3 +/- weeks for this 'Frost Queen' and she's looking like a Rock Star covered in bling! 🤩 I watered heavy yesterday and added 1 tsp/g of Unsulfured Molasses to the 1.5g of de-chlorinated water which was then ph'd to 6.6 @ 72℉. Her pot had some weight to it when I checked today so I'll skip watering her until tomorrow. I finished up today by checking her over and giving her pot a turn. ~Thanks for stopping in! This epic run will be wrapping up in the coming weeks...Stay lifted and be Blessed! 😎🙏~
Likes
7
Share
Start of week 2flower buds forming nicely will update at end of week Updated 4th July 2020 really bouncing back after pH corrected
Likes
21
Share
@Rap_a_cap
Follow
Pre-flowering stage, stretching phase. Today exactly 14.41 hours of light. Average week temperatures 80 °F High humidity, some stormy days. New heat wave is comin' Short and bushy plant, unbelievable cheese smell, if branches are incredibly sticky now, what will happen later? No issues, no pests, no need 4 feed.
Likes
2
Share
Day 56 Shes really fattened up.. smelling great and super stinky. Looking forward to seeing how thick she gets. Shes maybe got another 3 weeks? Maybe 4 if i push her
Likes
111
Share
@DevilsBud
Follow
Day 56 of flowering of the 2 Hyper Glue from Anesia Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing she flushing very good and is almost done but here leaves are still Green en very healthy looking 🤔 here leaves should be turning other colors because of getting the feed out of the soil ore i am i wrong and can the nutrients be flush out but leaves still very healthy looking ? Trichomes are looking good how i want them so i am bit confused with this one but if the ppm is down enough i might just cut here down because she is looking fucking great 👌🏻 23/12/21 Runoff is around 1100 ppm almost done 👌🏻 25/12/21 Runoff is around 800 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 600 ppm 🤘🏻 beyond frosty buds are HUGE!!! smell is Tru the roof Super Glue x Apple Fritter is something els thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end can recommend any grower Hyper Glue from @anesiaseeds 28/12/21 Chop chop 1 hyper glue One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
60
Share
This was an incredible cultivar! She put in fat Buds in a timely manner and ripened pink and teal buds. The aroma is no compromise either. She has floral citrus top notes and skunky back tones. Out of the 4 testers I did this round this one seems to be the one for yields as well. It's a win win with this strain. Great creation from Fast Buds
Likes
29
Share
@Libanese
Follow
When I started the week I put it on the net, the holes seemed too big and I thought about using sticks to reduce the area, I don't know if it's a good idea to put the sticks horizontally too. I decided to improve the number of the net holes, i used a rubber rope and stiks. Now I have 160 holes, maybe are too many but i think that can manage the net if i need moore space in the holes.
Likes
1
Share
@Cannerd
Follow
I'll be updating the comment with the daily log shortly, but figured I'd get the photos and weekly overview up. I started off this week with a topping at about the 4th node, leaving the larger fan leaves on for now. I then left then alone for a bit while I waited for the new branches at the nodes to grow out, rotating as needed. By the end of the week, they had all bushed back up with new foliage and growth. I also included photos pf the flowering mother plant to keep up with that sneak peak. She still wasn't showing signs of flowering, so I gave her an extra 24 hours of darkness to hopefully kick start the process. As I went to go shut unplug the light source, I noticed that there was a smaller light leak from one of the vent ports, so I also made sure to close that up. At the end of the week when she started to show signs of flowering, I defoliated her to help with light penetration, as she's got massive fan leaves. You'll see in the photos that I took that opportunity to decarb the trim as well. I'm sure there's little to no THC-A, but whatever other compounds are present should make for a nice addition to some butter later on down the road. I just won't factor it in when approximating the potency of the final product.
Likes
41
Share
We enter the magical moment and do it with a surprise, we will be for a lot of time in collaboration with Marshydro and thanks to this we have a brand new light setup and truly top tent. The two Dark Phoenix are coming to the end. The first plant the most regular with a topping to 16 pounds has raised and inflated well and regularly all 16 and practically they are more or less at the same level at the time they are going to do the final sprint they scare. Beautiful peaks see them mature will be a joy. The second plant had a problem with the leaves I think a deficiency or excess of something, I am doing a pH 6 flush to make the nuts absorb and give an enahcer bang before the end. There are both and looks like the top. Immediately after the Flush the last wintered with Enahncer is scheduled and then only Flush. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER, we already like it so much because it covers the intact length of the tent. Tent >> Marshydro 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com GD >> https://growdiaries.com/grow-lights/mars-hydro
Likes
9
Share
@Headies
Follow
So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.
Likes
14
Share
*********************************************************************************************************** START OF WEEK The Hawaiian Lion (right) and Tricho Jordan (left) are the two plants that dominate the face-on tent photos, and for good reason. Each of those plants is twice the mass of either Chimera. The HL is superior in bud sites, resin, and terp intensity, but the Tricho and the good Chimera #3 are both not too far off in resin production and aroma profiles. The weird runt is frosting up too, so we're looking at getting something unique and quality from each. That is, if I don't muck this up. I fed last night, and as part of that process, I mix my nutrients in a four gallon batch at a double(ish) strength. I then add that to my reservoir, which is shut off at that time. This allows me to work in the res, to both get the ppms right and the ph within range. I just use plain water to level off the ppms and then I adjust for ph. What I didn't do last night is TURN back on the flow of water from the reservoir. However, you wouldn't have guessed it from how the plants woke up today (see first image). I normally check the bases of each plant daily, and in doing so today, I noticed that one felt slight dry. All tanks were empty, but all plant bases were somewhere between wet to moist. This is how I spot check, and it's worked in the past. This isn't the first time these tanks have had a catastrophic issue leading to an unexpected no flow sitch. There's a filter that sits between the reservoir tank and the primary feed line. That has unexpectedly clogged on me in the past, but with no deleterious effect to the grow. That was caught within a day as well by testing the plant bases. I don't blame autopot for either event. Obviously, last night I was a baked potato and just forgot a step. The clog is because I use yucca in my mix, which is an organic material that over time in the reservoir leads to build up. I'm afraid to introduce hydrogen peroxide into the set-up, so I'm just maintaining my reservoir by cleaning it fully every other week for now. I don't want to kill off the bacteria in the environment. I'm also using some fungus, too, so I'd rather promote coexistence of a microbiome than serialize it, especially considering the plants seem to be on pace. **************************************************************************************************************************************************************** END OF WEEK Shit! I've got a herm. I've found four nanner clusters this week, all on the lower third-ish of the Hawaiian Lion. Someone, thankfully, spotted it in the purple flower pics. Turns out, while super fun to look at, those sweet violet flowers turned into harbingers of mother fucking doooooommm. I've never seen this before. I guess I've been fortunate, but I've also never had a camera this capable before either. I had no idea how small these pee pee's were. I guess I was expecting girth, but shame on me for not knowing. I rapidly learned as much as I could over the last two days, and I've come to the conclusion that I may or may not be screwed. The consensus on my situation ranges from either burn my tent down to thank ja for the blessings of feminized seeds. We're riding this baby out. I think I have fifteen to twenty days left and I think these little nanners might have been in action for ten days, hopefully less. I don't know what kind of damage will be done in that time, but honestly, I'm not too worried. While disappointing, my use case is a personal supply of bubble hash and flower rosin. If it's seedy, I'll wash most of it. I don't know what caused it, but I'm thinking a light leak or genetics. The environment is dialed and that plant hasn't shown one sign of anything less than vigor throughout. The spots that developed the purple flowers (lower bottom half to bottom quarter) are all in the vicinity of where I found the herms (four locations) and these locations are close to the edge of the tent along the zipper. I'm vigilant about keeping my tent and grow space in order, but a light leak can't be ruled out. I'll have to test that after the harvest. The herm flowers are minuscule and I'm surprised I found them. The camera was a great tool in this case. I sprayed the areas that I removed the nanners and then dried it, but for what it's worth, I think the damage was already done. That water bit felt more like ritual, but I'm still feeling optimistic that I'm not totally hosed.