New flowering continues to develop on this lady, she seems to be swelling up day by day. Yellowing of the fan leaves has started which usually means it's time to flush, I need to check the trichomes to see how amber they appear before I do just in case the flavour or yield could be effected.

9/27 - start day 43 - So, the other day, I tried running the thing sealed at 1100-1500 ppm and temps got to 95 with RH at 75% and the walls were straight sweating nuts....dripping...puddles.... that tiny dehumidifier wasn't doing jack. Since, I have managed to tap into the central ac with some makeshift ducting, which now supplies my spot with a nice cool, dry breeze every so often. With this, I have managed to maintain a temp of 88-91 with a RH of 37-50% at 750-950 ppm. I can keep the 750-950 ppm with a flow rate of about 1 cfh, which only goes off roughly 10 minutes every hour. probably will try it and run the temps a little high. ya, can't seem to stay consistent. i swear, it'll stay at that ppm after it all leaks out and the surrounding room is sitting at the same ppm maybe, lol … should probably drop temps and the co2, but hey, might as well gas em out while its there …. hey, maybe they'll return the favor and gas me out after harvest😁 that little square light looks like it should be lighting a lizards cage or some shit …. I swear the thing probably only pulls 30 watts, if im lucky. It didn't come with a book or directions or any type of specifications.... said 3000 watts,....id give it 30. If that's the case, im banking on the other 2 lights to cover that little red spot. Oh, and those little side lighting things suck. the stupid remote/timer thing is ….. garbage timer thing 9/28 - 44 - I tossed a HID in there for a bit for the hell of it....I really wasn't digging the "reptile light", but its still in there. I went ahead and tossed a window ac unit in my "window". it was again TOO warm with the HID cooltube and all. Was hangin around 94-97 degrees!!!! ac there, now I need to make some makeshift ductingand vent the ac exhaust outside

So things are going good. I had an issue with my shower and was worried where the pipes would take them but it’s all good now. The leak was from below me it was just they had to turn off the stopcock to my shower. So it’s nice to have a shower again! Iv not done anything this week really other than poke my head in. Oh shit yeh I actually hoisted the fc-e3000 up and put it roughly where it would be in a 180cm tall tent but then I also added my TSL-3000, daisy chained them and dimmed to 60%. Ideally I would have the fc-e3000 the other way round so that I could put the bars either side of the TSL-3000. I was looking at the 2000’s editions of High Times me man it takes ,e back - all the ads are either full grow boxes that are ‘stealth’ or detox solutions for drug tests! Haha bad times….not much better here now tbf. I did find it interesting that it took the police a while to get used to it when the states (well, it was only cali at this point) legalised for medical use. The police here are in that phase here in the UK! Edit: annoyingly I snapped the very top of one of the cola’s off by accident, which is annoying as there weren’t many to begin with. Hopefully it’ll just mean the very tip of the bud just goes down a little to the next node. We’ll see I guess! Tbh, I’m more concerned about getting some sort of bud rot from the tropicanna being too dense. I wouldn’t ever veg plants for this long, with this many plants, in a tent this size again. Probably max of 3. Oh well, we’ll see what happens, I’ll probably cut off some more side nodes to create some air space Edit: to be honest, I’ll most likely take out the long light because it’s just blocking loads of the light from the FCE3000. I think I’ll slide the fce3000 down to the end with all the tall plants as the canopy is all the size height and then add the 150w ts-1000 for the low down diesel plant. Lights are on until 11:30 so I’ll try and do it today…

This week went very well! One will be getting cut an hung to dry while the rest finish up with one more week of flush ! These ladies are smelling so lovely I hope you all enjoy! Stay tuned for next week! Cheers 😤💨💨💨💨💨

Día 108 (16/09) Tras el flush las plantas muestran tímidamente nuevos pistilos blancos! 😍 Hoy no es necesario regar! Día 109 (17/09) Me he encontrado a OnionOG #1 y a Purple Punsh completamente sedientas! Con las hojas caídas! Riego con 1,25 litros de H2O a cada una de ellas (el resto no necesitan riego) Día 110 (18/09) Riego con 500 ml H2O Las plantas con el bloqueo empiezan a mostrar nuevos pistilos, sobre todo en las partes inferiores Día 111 (19/09) Riego con 250 / 500 ml H2O Se vuelven a formar pistilos blancos en todas las plantas que han sufrido el bloqueo! 😍💥 OnionOG #1 va como un cohete formando y apilando flores 💪 🚀 😍 Día 112 (20/09) Día lluvioso. Riego ligero 250 ml H2O Día 113 (21/09) Otro día lluvioso. Riego ligero con 250 ml Día 114 (22/09) Detecto algunas moscas blancas apoderándose de las plantas y decido hacer una aplicación foliar de piretrinas (Spruzit a 15 ml / l) Riego con 1 Litro de Té Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Kelp Hidrolizado 0,3 g/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Girls just doing their thing. Just retired, topped, defoliated, and lollipopped. Flipping 1st/2nd week of June. Gonna be a good run. Hoping for 6-10 zips.

Hi Guys and Girls I will do this challenge to 😎 I use a tiny pot 16 oz-0.43 l (i dont have a solo cup) I hope my Bart Simpson will do a lot I used soil with perlite+coco For this challange i will use BioBizz nutriments and a lot of love.😍😍 Thanks to read me Good grow 🤘🤘

She is growing nicely and she has been really easy to grow. The only problem I have been having is humidity issues off and on bc of the weather but I added an extra inline fan. The buds are coming in and im just making sure they fill the scrog out.

Another week flowering for our creepers, at the moment everything looks fine! Next week we will add some extra PK!! Wonderful strain, but i didn't expect less from the super sativa seeds club! The flowers are showing a nice pink color very beautiful ❤️

Hello everyone, Everything is smooth just i put the scrog to late the delivery was late, but everything good will see how is going

purple punch is looking great and smells even better There are 2 purple punch plants in this grow and they are defenately producing different types of flowers they both smell the same tho but look completely different. one leaning more to the sativa and the other lookes indica all the way. im going to run them in ice water during the flush weeks to see if either one shows some purple just another three weeks or so then it will be harvest time i cant wait smoke some of each type to compare sisters from one another one is skinny and the other is big boned and both smell kick ass. having a hard time staying in the 70s its gotten quite warm the last fiew days and has reached 84 had to open the tent door to get it down to 78 when the lights are on hopefully it wont get any warmer before harvest time . in 3 more weeks

_________📅 Week 11 | Day 71 - 77 📅 🌼🌸🌺Flower🌼🌸🌺 __________ 14.07.25 | Day 77🌞 🔸Poison Envy grows vigorously with healthy, lush green leaves. The buds develop vigorously, are rich in resin and begin to exude an intense aroma. The buds are compact and evenly covered with trichomes. The white pistils are still predominantly upright and bright - the ripening process is stable. 🔸No more training - focus on rest and bud maturation 🔸The environment could be a little better, but it's still limited, but when we enter late flowering I really need to do something about the high humidity. at the moment I have very good air circulation 😅 _________________________________________________________________________________________ current conditions: 🌡️🔆= 24-25° 🌡️🌜= 20-21° 💨 Hum. = 67% 🔦 PPFD = 900 umol 12/12 🔦⌚DLI = ~ 38 _________________________________________________________________________________________ equipment to use: 💡 Light: 2 x Sanlight Evo 4- 120 on 90% 3 osziling clips fans ⛺ 120 x120 x 180 🍯 Pots: 18 liter pot 🌱 Soil: Bio-Bizz light mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap Water 0,5 EC _________________________________________________________________________________________

Well, it's finally time for an update, right? And for a newbie like me this week has been quite eventful! 😲 After last week's "Helmet Head" (which I suppose was my fault for not burying the seed deep enough 😱) her leaves started to look twisty, Honestly don't know why that happened but my three hypothesis are: because that's just the way she is, because I didn't properly bury the seed or I made a mistake somewhere else. However I also think she looks pretty and this makes her look quite "special" 👍. In her 6-7th day after sprouting I noticed her leaves started to look even more twisty and she was about to outgrow her cup. I worried and decided that it was the right moment to transplant her. At first I didn't know "how" to do it and all I knew is that I could shock her if I did it wrong (which worried me haha 😨). None of the sites I checked really specified any kind of information regarding how I should prepare the medium for the new plant (just some vague information here and there) so I came with the idea to just water it bit and then "massage" the soil to avoid making it "lumpy" and I feel it did work out well in the end! I feel I didn't shock her much and in her second day she was growing even more as well! Nice! 😍 Next week I'll start feeding Puff with some nutrients but the PPM of the tap water where I live is somewhat high (around 600) and it's electroconductivity is around 1200 us/cm but a lot of growers in here still use it (they just wait for chlorine to evaporate) so I'll try doing the same. I'll use half dose of Biobizz Bio Grow and half dose of another product called Gold Sunshine from Quemanta (which is Cal-Mag with some amino acids) and see how things develop! 😃 I'll try to see if I can make my DSLR take the photos for future timelapses, because my webcam sucks for that job! Thanks everyone for reading 😉

This lady is chugging along chasing the strain next to her and has been having a bit of a hard time against this slowed growth.. I've tried less water but still it hasn't really helped yet will watch and wait for that explosion.. cheers

Hello everyone! The last two weeks I have been very busy so I did not have time to upload the previous week. The previous week I noticed a mold starting to form in the flowers of the wedding cake (the taller plant) because the humidity was too high in the growing space. I acted quickly and added a dehumidifier, an extra fan and a home co2 system . On top of that, I cut out any part I found that was infected with the mold. Last week I started washing the gorilla skittles (the low plant) hoping to harvest it next week.

Finally starting to flower only 5 days behind when I wanted to start so not 2 bad but still waiting on deliveries. Amazon is Killen me Alaskan Purple...Gelato og....Skywalker og....do si do cookies....runtz....white widow...Bruce banger for this grow