Plantitas sanas.

I really lost track i have been really busy at work working alot of overtime anyways im currently on week 7 of flowering.. All girls are looking real frosty

I made a new sewing solution for the Candy Bubatz. I didn't use enough CalMg. Now I mixed the water with CalMg to an EC of 0.4 and then added all the other nutrients. I'm at an EC of 1.3 just like Canna says. I added more Rhizotonic because the roots aren't that mature yet.👽

Amaing flowers

Lovely week! Done a little defoliating along the way while positioning her branches into the scrog, some i had to use ties to manipulate the branches where I wanted them in the scrog. Started by bending the main through the scrog then tying it back like an S, and the lowers I gave a little bend daily and then tied with pipe cleaners until she goes into full bloom and shoots her secondary stems up and matures! Can’t wait that’s probably days away for me but a week for yall! But follow my insta and there you hey dailies! 💚💯 thank you gromies

Just got done with trimming the 4x4 @greenhouseseedco Super Silver Haze / @blimburnseeds Silver Surfer Haze tent. The final yield is exactly 1000g plus some (kind of a lot)that I smoke in the last 2 weeks 😃 Also got 6, gallon size ziploc bags filled with good quality trim for concentrate. To be honest I was expecting a little more but keeping in mind that this grow I did not supplemented with bottled CO2 I think I’m good with the results. Definitely I enjoyed a lot this grow and I’ve learned even more.

esta semana seguimos doblando y podando alguna que otra ramita . Al parecer la nº1 ,la Triploide (tres ramas mismo nudo), que pasó a ser diploide (dos ramas mismo nudo) después de podar el primer apical parece ser que ha vuelto a Triploide y esto podria dificultar las otras dos ramas que van más avanzadas por lo que me decidí por cortar y así que siga diploide. A los 40 dias volví a podar los segundos nudos de cada rama dejándolas ahora si listas para pasar a floración en un par o tres de dias. más un agarre de las ramas a las macetas y así ir deshaciéndome de los dobladores , estos estan quedando pequeños. A los 41 dias me dió por cambiar de posición la nº2 y ponerla en el lugar de la nº1, la triploide. La nº2 está creciendo algo más vigorosa que las otras dos y la nº1 va por el camino de quedarse algo más enana. La nº3 seria un intermedio.

09/03/26 - 15/03/26: the smell inside the tent is lovely! I'm tempted to leave the door open. The Blueberries are very loud, especially #2 it does smell like blueberries and cake batter. Vanilla Créme Pie is smelling sweet and like plasters. Chicken n' Wafflez is something else: chicken skin but also lemon and hints of gas. ? Blueberry #2 should be ready by next week, #1 isn't far behind. 🐔 Chicken n' Wafflez is a bit ahead of the 60 days schedule I'd say 🍦Vanilla Créme Pie is on track for a 65 days finish Without trying to sound like a shill but these are the best strains I've ever grown. Really looking forward to harvest 😁 See you next week!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Day 42 first day of the week I turned the Growers Choice ROI-720 up to 30% its using 216w at 240v. Day 44 pictures were after some simple hand bending lst. This week we've seen alot of growth in all the plants. They need water about ever 4 days and between all 4 they take a gallon and a half untill the get a little run off out of the bottom. Roots are starting to come out of the bottom of the pots. Day 44 I noticed some spots on plant bs leaf I think it was from a nat or something I saw in the tent. And same day plant d has very slight yellowing on the tips of the newest growth. Think it's a deficiency of some sort, I'll look into it. Day 45 Transplanted into 5 gallon fabric pots with fox farms ocean forest soil. Didn't water today because the root balls where still pretty moist. Raised light to maintain 24" about the canopy. Day 46 Watered all 4 plants took about 4.25g of water. PH 6.3 @ 73° F. Day 47 Think I shouldn't have watered yesterday plants A, B, and D are drooping. Plant B has some light brown/yellow spots on the middle growth and very slight yellowing on the tips of the newer growth. Plant D has different spots dark red/brown almost burnt orange on middle growth and yellowing on the tips of the leaves. Weird how plant C just doesn't care what I do to it it just keeps getting bushier and wider leaves, never yellowing or drooping. Day 48 None of the plants were dropping the evening, and the spots and yellowing havnt gotten any worse. They grew alot since I measured yesterday.

Only the Amnesia plants receive fertilizer from now on. The plants look healthy. We defoliated the Ztrawberriez a little for the last time trying to be careful not to cut to much. Looks pretty good I´d say. Im wondering how much they are strechting from now on. We will see the progress of the plants in the course of the week. Amnesia 2 shows some signs of over-fertilization a website said, causing purplish discolouration, on a hand full of leaves. Since its only one plant that has that problem at the moment we arent worried too much. Every Amnesia plant gets the same nutrients with every watering. Regarding the week: The Ztrawberriez is starting turning purplish. We are planning to harvest her next week. Amnesia 1 is loving her life in there. No signs anything negative. Stems got really strong during stretching and looks beatiful. She will keep on getting fertilized water. This plant looks absolutly stunning considering we just let her grow however she wanted As I said before at the start of the week, we had some problem with over-fertilisation on Amnesia 2. During the week it got very much worse caused by be us watering with the same high dose of fertilizer again by accident. It is what is tho. Theres a few leaves affected by this ,which we will cut off, otherwise the plant looks really happy with the new buds getting bigger and bigger. I feel like Amnesia 3 is a ticking time bomb for mold. Because she grew so bushy in such a small space I repetedly cut off leaves. I think this is resulting in a weird kind of grow now.

Nutes, watering: We're flushing this week 4L water + 4l water pH ~6.4 Training: No training Environment: RH this week is between 40-45% lights ~45-50 DLI Growth: Almost no changes this week. Except the higher leaves are gettin' yellow and a bit purple. Trichomes look almost done. I'm waiting until i see just a slight touch of ambers on the flowers themselves.

Hoping that this week will not be a tennis match with my PH and my nutrient solution. Last week I saw my solution drop a full point in a matter of hours - consistently. I also ditched the PH up/down dosers crutch two grows ago, and I am not missing it as the intel is far better without them. IMO PH dosers do not give you real-time feeding feel from your plant - yet they adjust your PH to the "Perfect" level. Less is more in this craft, and in more ways than not. There is a balance between technology, automation, efficiency and most importantly - humans. If we removed the human element out of a grow, the product will be inferior, right? - trichome check showed mostly cloudy, with a few random amber if one looks hard enough. She’s ripening nice and reservoir running fairly normal for late flower. Wonder if that zero water filters-gone-bad caused my major PH crashes. Fed her KookBloom dry only this week and now in a 2 day flush. Should be about 10% amber.

Las plantas están progresando de manera saludable y muy rápido Les aumente en 0,5ml los dos nutrientes que les estoy dando y ya pueden ver los resultados He estado muy pendiente de las plantas con el tema de la luz, frecuentemente las estoy rotando para que absorban la mayor cantidad de luz Estoy aplicando jabón potasico para limpiar las hojas y alejar las plagas

8/15 Yesterday the girls finally got some sun. They're flowering. Like crazy. I do need to do an application of BT once this rain stops. It just started up again. Went back over and things were dry. I decided to hold off watering until tomorrow when I feed. 8/16 Watered the 50 2 gallons, 10 1 gallon, and the rest about 1.5 gallons. I fed a pint to the ten, 2.5 pints to the 30 and 2.5 pints to the FIMMed bluecheese that looked hungry. This way I can tell if they can handle larger doses. I'd like to keep it as small and simple as possible. Gave me a fright this morning when a sheriff pulled in while I was feeding. He was on his way to a neighbors but it looked like he was just admiring things lol. I'm all legals there's no problem there. I put off spraying BT last night because dad had a couple ppl drinking and I didnt want to interact with them. Plus it was to early. The sun hadn't crested the barn yet. At least now u know what time to go spray. I'm finding some lady bugs and I killed my FIRST aphid of the season. I still have caterpillar holes in some leaves though so I might as well hit them with the BT (even though I actively hunt them). No one ever said growing cannabis is easy. Oh and my soil must be BANGING because I found some mushrooms growing in it and like a mycelium web which is awesome. 8/17 This was a quick morning due to an upcoming doctor's appointment. Removed some grass that had grown on the tar from spilt soil as it had diseases on it. I don't want that spreading to my plants. I have one blueberry cheese that I FIMed with four cola's that doesn't have as many leaves and has dropped a few leaves but looking at ot from the other side it doesnt look as open. I know that these girls are transitioning and this is the time I lose leaves. However some plants still seem totally green with no problems despite flowering. I'm wondering if it's a specific phenome thing. I also noticed that the caterpillars are still there and this morning would've been a great time to apply BT but I didn't have time and since I upped the feed I didnt want to do two things at once and have a problem and not know what it is. 8/18 Rained overnight. Plants were soaked. It's not raining now. Plants are definitely overwatered. I'm losing a few more leaves that are yellowing on the bottom interior of a couple plants. Some of it could be from the transition to flower ir the large amount of rain we've been getting. At least my drainage is really good. I need to pull the fence out and co soder cutting a pallet I. Half to better utilize space. I know I say this stuff all the time and I'm not sure it NEEDS to be done. What DOES need to be done sooner rather than later is to apply BT. I can see the damage from them. It's not bad but I want to avoid botrytis as much as possible so those pillars have got to go. Otherwise I've never had plants this healthy and it's been a real ahotty season. Boy those 10th planet's are all mice and green and healthy looking. I'm really looking forward to flowering these strains and see what they can do. I'm already greatly impressed with what I've experienced so far. UPDATE: Wasn't raining earlier then it Rained off and on but just a light steady rain that plants love but it's 3:30 now and it's pouring. Guess I won't be applying BT tonight. We need some sunshine but unfortunately I can't control the weather. Just sitting here thinking I was wondering about using Plant Doctor preventatively just due to the steady rain but I noticed mushrooms growing in my soil and since I haven't not9ced any type of fungal problem I'll revisit that idea another time. Polycarbonate roof or even some form clear plastic and a rough frame of pvc or extra lumber. Theoretically I believe I could move them all indoors for a little bit if need be but that would he a huge pain in the ass. Honestly I've got great drainage and my watering seems pretty good so I might be alright doing nothing. We shall see knock on wood. 8/19 Plants were soaked this A.M. I took a video and uploaded it (which takes forever). It's sunny though today and after the sun comes out after a period of rain the plants grow like crazy. Everything is flowering nicely. I think I can go to the end of October. I talked to a lady today that said she'd already harvested some of her peanut butter breath clones. It's my buddies mom and if you look back at one of my diaries NY mendo breath was done in September. These girls have a ways to go but the are explosively flowering which is good. It's easy to tell which strain is which. Pheno's vary but the flowers on the plants are easy to distinguish from one another. I've also never had plants stay this healthy green this long! Previously I'd have multiple pests, wpm and maybe septoria at this point. I think I've upped my game. Knock on wood. My worst problem now is worrying when to spray BT for the miner caterpillar problem. I have wasps, lady bugs and a shit ton of birds from the 3 bird feeders. I see them dart in and out of my cage. Chances are I'll spray BT tonight and take some pictures if it's nice out. 8/20 The sun is finally out. Bags are still heavy. Looks like it Rained again. I found caterpillar shit so I REALLY need to get that BT applied. I also saw minor damage to a budsite on a low hanging branch. Looks like those fucking earwigs bur I'm probably being paranoid. I also had to remove the rope that I was using to support "the big cheese" because with all this wind and rain it "rubbed" against the stem and caused an injury. I don't need that now anyway with the trellis up. Bids are developing rapidly and stacking up nicely. I have a couple plants that aren't as green as the others bit it may be do to all the rain we've been getting. I think I need to increase the volume of liquid i give my plants when I feed. Next feed I'll be doing at LEAST a quart. Due to my w8fes illness I haven't been able to spend as much time there as I should. No fungal stuff "YET". I have seen some leaves that show the plants have been over watered. Drainage is good though. I forgot to upload the video from this morning and it's uploading super slow so I'm gonna have to upload it tomorrow 8/21 Awesome. Went to town and left without going to my doctors appointment. Good job man. 👏 ANYWAY....My phone was dead when I went to town so I coukd only upload one video. I'll have to do the others later. I mixed up a batch of bt 1 tablespoon with half gallon of water (as that's what this hand mister holds. I went around the cage and sprayed every angle. Then I went to each individual plant and sprayed while spreaking the branches to make sure I got the interior. I used almost the entire half gallon so I'm hoping this will help. Bags were heavy but doesn't take them long to dry out. I'm wondering if the yellowing that is moving up (on the small purple punch and the one in the tote) is because they need more nutes, they're transitioning to flower and really stacking up or because they've been over watered with all this rain. Opinions are more than welcome. I'll check the girls tonight and if the are wet enough I'll feed and at a higher volume. If they aren't ill wait till they get their full water. MY WIFE WAS HAVING AN "MEDICAL PROBLEM AND SO ON THE WAY TO THE DOCTORS I CHECKED THE PLANTS. THE 10TH PKAMETS WRRE DROOPING. I QUICKLY MIXED UP ENOUGH TO FEED EVERYTHING AT LEAST A GALLON AND THEN GAVE THE ONES THAT WERE THE WORST LIKE AN EXTRA HALF GALLON. JUST ENOUGH TILL WE GET OUT OF THE ER THEN I'LL GIVE THEM THE OTHER HALF OF WATER AND ILL FEED THEM. AT LEAST MY WIFE IS OK. UPDATE: Took my wife to the hospital. They did a shit ton of nothing which is par for the course. However, luckily for me (yeah right) I got back early enough to give the plants another half gallon of water each and then I fed increasing the volume to 2.5 pints (upping the big bloom to 3 tsps per gallon) but I ran out of feed on the last plant. I only mixed up two gallons and it was super dark so thar one container plant will need to be fed tomorrow I guess. This is masterofsmeagal signing off to fucking FINALLY get stoned!

Die Triebe fangen an sehr interessant zu werden das Training tut der Pflanze sehr gut und die Farbe gefällt mir richtig gut

Gushers is growing great under the Spider Farmer G5000/UVR40 lights, in the Athena blended line nutrition. She is bulking and, and smelling good. Her colas are developing nice, and a good frost layer. Everything is looking really good. Thank you, Royal Queen Seeds, Spider Farmer, and Athena. 🤜🏻🤛🏻🌱🌱🌱👸 Discount code: GROWERS20 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)

A few of the autos have mostly milky trichomes but no amber yet. Maybe another two weeks.

Week 3 (27-11 to 3-12) What's good everyone? We started this week off topping the lady and removing the 2 bottom shoots. The next day Santa came early 😁 Got 2 new clip fans and the AC5 Power strip from Spider Farmer. The power strip has 5 outlets you can control in the app, they can be turned on based on a time cycle, humidity or temps. It comes with a sensor that monitors light, temperature, and humidity. And a soil sensor that monitors soil moisture (VWC), temperature, and electrical conductivity (EC). It also has a light adapter to connect 2 lights, that can be controlled in the app aswell. The app shows the current VPD, i try to keep this around 1.0. In the middle of this week we increased the light intensity from 30% to 35%. LUX: 13.000/13.500 to LUX: 15.000/15.500 This week's growing conditions were 17.9°C to 22.4°C with a humidity of 55.5% to 67.6% and watered 2 times with 0.5L. See you next week!