We are getting there can wait for end results..

Title: 100% ChatGPT-Guided Grow – 12/12 Fast Flower Test (With Supervision) Hey growers! This grow is an experiment: I'm letting ChatGPT guide my entire grow cycle, from lighting to nutrients to environmental tweaks. It’s all based on AI suggestions. Of course, I’ll still be keeping a close eye on things — if I see something going wrong or the plants aren’t vibing with the plan, I’ll step in. But the idea is to test how far AI can take a grow under controlled conditions. Strains – All from @Sweet_Seeds (F1 Fast Version): Mental Rainbow F1 Fast Version Tropicanna Poison F1 Fast Version S.A.D. Sweet Afgani Delicious F1 Fast Version Gorilla Girl F1 Fast Version Setup: Coco in 20L @MarsHydroLED SmartPots Grow tent: @SecretJardin DR240W Lighting: 2x 720W LM301H EVO LEDs 12/12 from seed Germination: May 14th / Main grow starts May 20th Nutrients: Hy-Pro Coco A/B CalMag Pro, @BAC Silica Power, F1 Extreme Booster Irrigation: Week 1 hand watering, then Blumat pH starts at 5.8 CO₂ supplementation via natural gas system (Spider Farmer GGS) Goal: Complete a full grow cycle in 10 weeks or less, from seed to harvest. Updates will be posted in a personal yet informative style — a hybrid of stoner chill and data-driven grow logs. Let’s see what AI can do in the grow tent. Stay tuned! 🤖🌿 🌱 Weeks 1–3 (May 20 – June 9) – Seedling to Early Flower (Stretch Phase) Goals: Strong root development, firm stem structure, controlled stretch Light: 12/12, start at ~500 PPFD → ramp up to 800 PPFD (day 14–21) CO₂: 1500 ppm (only active when lights are on and temps 26°C) Temperature: 26–28°C day / 22–24°C night RH: Start at 70% → gradually lower to 60% Nutrients (EC ramp-up): Start EC: 1.0 → increase to 1.4 Plagron Cocos A+B + CalMag Pro (0.2 EC tap water) Always mix Silica Power first (0.1 ml/L) Actions: Week 2: Start light defoliation on lower leaves Week 3: Begin LST if desired pH: 5.8 throughout the veg phase 🌸 Weeks 4–5 (June 10 – June 23) – Flowering Phase 2 (Bud Set) Goals: Initiate flower formation, maintain healthy leaf mass, stimulate bloom EC: 1.5–1.7 (monitor Blumat watering rate carefully) RH: 55–60% Nutrients: Plagron Cocos A+B CalMag Pro Silica Power (0.1 ml/L – only until end of week 5) Start B.A.C. F1 Extreme Booster at half dose, watered manually twice a week Light: 900–1000 PPFD if plants can handle it 🌼 Weeks 6–7 (June 24 – July 7) – Flowering Phase 3 (Bud Building) Goals: Develop dense flower structure, maximize flowering potential EC: Up to 1.8 max RH: 45–50% Nutrients: @Plagron Cocos A+B + CalMag Pro @BAC. F1 Extreme Booster at full strength Actions: Final defoliation at beginning of week 6 Inspect leaves regularly for airflow and mold prevention 💧 Weeks 8–9 (July 8 – July 21) – Ripening Phase Goals: Maximize terpenes, trichome maturity, flush medium Week 8: EC: taper down to 1.4 Stop using booster Optional single flush with enzymes (manual watering) Week 9: Only plain tap water through Blumat (~0.2 EC) Temperature: 24–26°C Dim lights to ~600 PPFD for final 3–4 days ✂️ Week 10 (July 22 – July 28) – Harvest Trichome check: Aim for 10–20% amber with a loupe Optional: 48 hours darkness before harvest Temperature: Keep low (20–22°C) to preserve terpenes Deadline: Harvest no later than July 28 Powered by the new 2025 @SpiderFarmerLED GGS system.. Detailed setup (only SF parts mentioned here): SF GGS Grow Light Controller (1x) SF GGS AC10 Kit (1x) SF GGS 6 Inch Clip Fans (2x) SF GGS 6 Inch Inline Duct Fan (1x) SF GGS SensorPro Kit SF Ultrasonic Humidifier May 20 – CO₂ moved outside, lighting dilemma, and a warm future ahead Moved the CO₂ generator outside the tent today. Immediate win: steady 700 PPM from just the pilot light, no active burn needed. When turned off, it drops neatly to 400 PPM, matching the calibration point. Double-checked with the Dimlux CO₂ sensor—readings line up perfectly. Still no tracking info for the originally ordered lights, so out of impatience I grabbed two new 720W LM281B fixtures from Germany this afternoon. Should arrive Friday/Saturday. It's a Trade Assurance order, so in theory, I'm covered. Now the question: let the seedlings coast at 259 µmol for two more days, or hang the old lights to boost them to 500 µmol? Eight out of twelve are already above soil, and honestly, I’d rather not mess with the current vibe. Leaning toward leaving them be—low stress, happy sprouts. Best part: temps dropped to 27.9˚C inside the tent now that the CO₂ generator’s out. Room itself is 24˚C, so all in all pretty chill. Curious what’ll happen once those dual 720W monsters fire up… it’s gonna get toasty, no doubt. 24/05: Stocked up on new Plagron nutes—finally. Now I can lock back into the full 10-week feeding plan (Plagron Cocos + B.A.C.). Flushing the res tonight and going full reset. Mixing fresh soup right after, dialed in to match this schedule: Week 1: Plagron Cocos A/B: 2 ml/L B.A.C. Silica Power: 0.2 ml/L Plagron CalMag Pro: 0.5 ml/L B.A.C. F1 Extreme Booster: 0 ml/L EC: 0.9–1.0 pH: 5.8 PPFD: 500 DLI: 22 RH Day: 70% RH Night: 65% CO₂: 700 ppm

this plant is in Fox Farms Ocean Forest soil and will get straight de chlorinated tap water til week two veg.

This week I transplanted the clones of the first plants in flower.( 1 gallon container ) I also finished the final defoliation of the six bigger plants in veg before they get moved into a 11/13 light cycle (about 2 weeks). Pheno #2 at the moment is my favorite. All though it’s the smallest plant it has an amazing pheno that smells like blueberry gummy bears. The rest are showing strong cheese tones with hints of berries.

📆 Harvest Week, 19-25 August 2024 19-22 Aug - Observed and let the plant grow. 23-24 Aug - Flushed with RO water, turned lights down to 40% power. 25 Aug - Harvested the plant, began the curing process. 💚 Thank you Divine Seeds for this sponsored grow! 📑 The final week of flowering for Pablo Escobar! I gave her a good 71 days as recommended by the breeder. She grew using every one of them until the end. Another genetic hit by all means. A pleasure to grow. This is a sativa dominate variety so expect a longer flower time. You will be rewarded with thick dense buds, covered with resins and trichomes, with a sweet herb, earthy smell, nice and danky. Began the curing process in a climate controlled closet with a RH of 53% and temp of 71deg F. The main leaves are removed before the branches are hung upside down for 7-10 days for drying. From there the buds are removed from the branches, separated, and are trimmed to remove as much leaf as possible. Then placed in quart mason jars with a 62% Boveda TerpShield packet, burped daily for about a week or until 62% RH is maintained. Then labeled and placed in a cool, dark closet for long term storage for up to about 8 months or so. 🔥 Smoke Report: It took Pablo 10 days to slowly dry out. I cut all the buds off the branches and used my 19” Bud Trimmer for a quick finished product! I’m really impressed just how fast this trimmer works. It can take about 1/2oz or 14g at a time and with 4 or 5 turns of the handle it’s finished. Nice beautiful manicured buds in about 10 seconds. No more trim jail for me. As for the smoke. The taste definitely is the same as the smell. Lemony or citrus. The high is definitely that of a sativa. Comes on slow, then creeps up on you hard. Stays with you for a couple of hours, needing only a hit or two to recharge the high afterwards. No doubt this strain is very high in THC, and should be taken into account for the beginner. Another genetic hit Divine Seeds! 🍶 19 Aug final nutrient solution change 🍽️ 19 Aug final feeding schedule update 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 1.1 at 74 degree F 🔆 Light power at 50%, DLI 35 canopy coverage at 12hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this grow. Thanks for the all the looks, reads and stopping by.

Chopped the big tooth since she was flushed earlier due to issues. Also have the purple gorilla auto chopped and drying. Still flushing strawberry eclair and critical jack to come down next.

1/19/25 checked trichomes again. we are at the end of the grow, will be setting up my drying area. the conditions are not prime right now in my house. its cold and dry. humidity is 30-40% will be harvesting soon. #1 is about 30 amber and 70 cloudy trichomesv #5 is about 10 amber and 75 cloudy and 15 clear will update with harvest date and pictures 1/21/25 #1 chopped and hung 1/23/25 #5 chopped and hung 1/25/25 been able to keep the humidity around 60% but not above. i have a hygrometer hanging next to the plants around the height of the buds. its quite a ghetto set up considering i couldve just used my aci humidifier with the sensor probe. coming to the end of these plants feels bitter sweet. i feel like ive been growing these plants for a year lmao. i may try to reveg plant #5. even tho shes the most visually stunning she also seems to have very minimal

She was a "slow and steady wins the race" phenotype! 6 weeks veg + 8 week flower. She vegged strong through week 6, and then stacked up some intense colas, because of being lolipopped before flower! During her transition to flower, she was defoliated every 3 days to allow light and air to penetrate the canopy, and allow for maximum stackage! This is possible because, she didn't stretch much during her transition. Instead, she was stacking a tight node structure; and with every new node, comes a set of two leaves! This lady holds my personal record, for my largest yield from an indoor plant!!!

Welcome to 📅 Day 64 5/17/2021. I am very happy with her progress so far and 4 weeks left till harvest and the Mars hydro TS 1000 💡 is doing its job like a champ 🏆. stay tuned as I will update on thurs, till then happy growing and as always keep your stick in the ice 🏒 update:📅Day 67 5/20/2021 not much change but she is doing great and the TS 1000 is working like a champ

Looking forward to growing this one.🌿🌿🙂

Trimmed a little more & started LST on day 67 with clips, first time using these, I'm pretty happy with them, even bent one stem to HST breaking & the clips supported the break. Runoff PPM is 2828 average, it will only go to 2000 on here.

This Will be wrapping up the purple Queen and blue dream grow leaves on the purple Queen are starting to really color out as So when it's at the end of its life . Just RO water ph down to 6.8 until you get a PPM of 300. I'm going for Around about 150 100.

🌱: Partial harvest on day 76, 97g untrimmed 💧 : 12l, flush on day 72 💡 : Dli: 45 mol/m²/d 🤔: Switch to Spider Farmer equipment on day 75

10/22 She grows! 😁 In the home stretch, just giving water when needed. Shes so photogenic! .

Growing fast liking the #3 for far #1 is the slowest growing Top plants heads on 7/18/2 Seedlings was transplant on 7/21/25 into the 5 gal Put in my 4x4 to continue veg

Ok so had a lot to do this week harvested the large critcial mass to which I got 6 n half 0z from one plant so happy with that i also had a few issues with enviroment mainting right temp and humidty as been a lil issue but think all is well now so there all now on the 7 week of flower think I may push these as far as I can to maximise yield potential overall a real good plant to grow had very few issues from start to finish a top strain a deffo keeper for the garden of mothers in my opinion

Eccoci anche qua all ultima settimana di vegetativa, la ragazza procede bene, anche se è la più piccola, sembra che stia tenendo il passo con le altre sorelle, magari è solo la genetica particolarmente piccola e cespugliosa, staremo a vedere, per ora sto andando leggero con i nutrienti, anche la c02 in pastiglie l ho somministrata solo per una settimana, perché non volevo che esplodessero troppo di vigore in vegetativa per non rischiare di avere delle bestie enormi che al conseguente aumento di c02 aumenta anche il metabolismo e devo fertilizzante il doppio per non avere carenze che mi portano in pochi giorni ad avere nevrosi delle foglie, se nn si sta attento e si utilizza la c02 senza avere gli strumenti che accompagnano questo tipo di compito, comunque basta non esagerare e controllare spesso le piante e se si nota una leggera carenza, somministrare del magnesio/potassio in più ad esempio, che è la carenza maggiore che ho notato quando somministra troppa c02 e temperature troppo elevate.. Bene siamo arrivati alla fine di questa settimana! Ringrazio Mars hydro e per l equipaggiamento professionale che mj permette di crescere le mie ragazze in piena salute! Buon 420 a tutti alla prossima! 😸✌️💪😎😽😺👊🌱🌿🌲🧑‍🌾

01-11-2021: Good afternoon everyone... here we are again. My Bruce Banger will be ready in a week so I thought... I can probably germinate some seeds. I still have a lot of them (thanks to zamnesia) Every now and then I also post a report on Growdiaries and since you can only enter a competition there by using only one Strain I decided to put a round of Wedding Cake. I wanted to grow this variety when I still got my seeds from seedstockers, but found it too expensive at the time. Now I had two fish vouchers from zamnesia, each one good for 5 Wedding Cake Auto seeds. I didn't really like AFs per se (although I enjoy the result every day) so I called them and asked if I couldn't get Photos instead of Autoflowers... That was no problem at all, so I now have 10 have seeds. I have not yet found a method of germination on Hydro that works well for me, so we're going to do it in the most reliable way for me... old-fashioned in Cocos plugs. I let it fill itself with acidified (PH5.9) water and then provided each plug with a seed. I now put this under a 60W purple LED lamp that I still had from my very first cultivation attempt. Once they are up (I'm guessing/hope with a week) these will go into my budget system to grow there under 480W LM301H panels for a few weeks but with only 12 hours of light. The idea is to move these to the large closet as soon as they are about 4 weeks old, but that is not necessarily a requirement because you can also remove the lamps from that loft and move them to this room. That depends a bit on the size. What I'm going to test this round is how good/bad 12/12 from seed is doing in Hydro. Since most feeding schedules with hydro assume that you only pre-grow 1 week, I thought I might as well rule out that one week. In addition, from the moment the roots emerge from under the net pots, I want to increase the EC to 1.5 fairly quickly. I like small stocky plants without having to scrog. Maybe I'll top and maybe even mainline, but that depends entirely on the development of the ladies. In any case, there will be no feeding computer for the first few weeks (a bluelab Guardian) and as growth food they are given Hy-Pro Hydro A/B with Calmag (4-4-1 ratio). I expect very low temperatures in space so it won't be a banger. I have the impression that a correct root temperature compensates to some extent. I'm still looking for a way to transport the ladies in the right way (or I have to find a way to be able to use the same net pots in both systems). But that is of later concern. Since I only have 1 pre-growth room and 1 flowering room, I will put these ladies in a kitchen cupboard for the next week. The Bruce Banger goes on Sunday and then I can put them in there. The idea is to continue breeding on 12/12 from now on. After six weeks, new seeds will always germinate and no more than 5 at a time. I now make a round with originally 15 ladies, 3 of them were left behind in such a way that I took them out (to prevent rot) with the probable cause of too little light. 5 Planting will probably yield a little less, but hey, I can't finish it otherwise. And now my friends are very happy with my clearing days but of course that is not what I grow for. In addition, it also hurts a bit to give away 3-4 ounces after so many months of work. Just a summary of the materials used for the enthusiasts.... Lighting: 3x Meiju LED Samsung LM301H 240W with Jisun Drivers. Heating: Juwel 200W aquarium heater Nutrition Growth: Hy-Pro Hydro A/B, Ata CalMag. Nutrition Bloom: Atami ATA AWA Max, Ata CalMag, Plagron Green Sensation Containers: 5x 11 liters Bato (2 liters of nutrient solution per container) 36 liter reservoir Extraction: G-Tools 400 M3 adjustable extractor and PK2601 Filter Measuring equipment: Bluelab Guardian EC/PH/Temp Meter, Ali temp/lv meter Irrigation: Pressure compensated drippers 7.6 L/H Disease Prevention: H2O2 50% Silver Stabilized