I am back from my holiday left on 19th of December so my friend handled them in had to remove a lot of leaves atvteh bottom they are very tall pistils are out. Crazily nice! :)

F66 Humboldt Sour Diesel SD3 only the tops buds swoll. the rest of the main colas didnt fatten up. Maybe it was me or the genetics or just the light distribution? She doesnt smell as vibrant as at F50-55. I dont know if she was ready back then SD2 buds fattened up and since she showed signs of flowering a week later than SD2, it seems she is ready for harvest now as the she smells more vibrant right now at F66 I harvested Humboldt Sour Diesel at F68. SD2:137g wet 25dry SD3: 251g wet 48dry

Hi guys. The girls have settled into producing bigger buds this week and have no signs of issues. I think two of them may have at least 2 or 3 weeks left and the big plant may have 2. This is the time I struggle with the most using autos. The breeder states a harvest time but this is under ideal environmental conditions and I am not clear if I have provided the perfect environment. I am going to let them go until hairs turn 80-90% orange. Overall they are looking frosty and feel very dense. This is the part were being patient is very important and imo the most difficult part of any grow. I just want to cut one bud off and smoke it 🤪 but I won’t. I have uploaded a picture of the new seeds for my next grow. Moving to photoperiods next grow woohoo. If anyone had any suggestions please comment and let me know 🧐 Cheers guys Microgrowery

Die Pandora ist allmählich am Ende ihres Blütezyklus angekommen und hat sich wunderbar entwickelt. Für die etwas lichtarmere Umgebung kann sich ihr Blütenverhältnis im Gegensatz zu anderen Autos an diesem Platz durchaus sehen lassen. Da momentan das Wetter wieder besser ist, bekommt sie auf ihre letzten Tage hin nochmal viel Sonne zum Ausreifen.

Eccoci qui… Tutto procede per il meglio ci sono bellissime piante che verranno mostrate singolarmente solo alla fine per non spostarle ogni volta. Grazie a tutti per il supporto 💚🔥🌲

Finalizamos la cuarta semana de floración , y las 2 power plant xL son las plantas más grandes del proyecto. Con una defoliación esta semana, ya que tenemos que dar acceso a los lúmenes en todo el área y que formen buenas colas de flores. 50% humedad ,27,5 grados de maxima, 6.5 Ph , y aporte alimenticio de la gama de advanced nutrients. Esta genética se comporta muy bien para ser Sativa y cultivada en indoor.

Día 6 (29/04) Spray solo agua el top del sustrato. DLI 13 Día 7 (30/04) Spray solo agua el top del sustrato. DLI 13 Día 8 (01/05) Spray solo agua el top del sustrato. Subo a DLI 17 Día 9 (02/05) Elimino la cúpula casera de humedad y empiezo a regar con 300 ml solo agua Día 10 (03/05) Empiezo a luchar con una ola de calor inesperada para esta época, que me trae temperaturas exteriores de 30 ºC y humedad relativa del 30%... Mantengo la cúpula casera de humedad Día 11 (04/05) Hace muchísimo calor.. 30 °C. A ver como lo llevan Hago un invento casero para aumentar la humedad Día 12 (05/05) Primera alimentación con Aptus! 300 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Creo que las plantas se ven un poco pequeñas para tener 12 días... esperando por explosión de crecimiento en los próximos días.... 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

So this week we started with her signals of pre-flowering. It still far from the development that the other plants achieved, but since this is my first time ever growing plant, it's quite possible that I committed some mistakes that cause this low pace process. Hopefully, it will be good from this point forward!

This strain reminds me of purple kush but then this is the best phenotype, very dark purple buds ready in 70 days

Bewässerung: 500 ml jeden 3 Tag in der Sechsten Woche pH-Wert: 6 EC-Wert: 1,8 mS/cm Temperatur: 26ºC Luftfeuchtigkeit: 55% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen das es was zu bekämpfen gibt, sobald die ersten Anzeichen da sind werden wir handeln :), aber zur Sicherheit haben wir wieder ein paar Raubmilben an die Pflanzen gehenkt. PPFD: 600 µmol/m²/s DLI: 38 mol/m²/Tag Düngemittel: Sie bekommt CalMag von BioBizz zu Prävention. Ab Tag 8 haben wir angefangen sie mit einem Mineralischen NPK Dünger (NPK 10-4-7) zu Gießen . Besonderheiten: Sie ist nun seit einer Woche im Großen Zelt und macht sich ganz gut. -Tag 36 sie erholt sich gut von Umtopfen und wir haben die LST Sticks wieder angepast.

They are really starting to take off now.im hopeing they do get about a foot taller.not sure though.

Week 3 of flower and decided to start using PLAGRON: Green Sensation a week earlier. Pistils are appearing and maybe need some phosphorous and potassium. Quite a bit of stretching going on. Had to bend back a few stems to try even out canopy. Some burnt tips? From what? No idea. One of the strawberry cough seems to be taking longer to transition, still stretching and no pistils. Apart from the tip burns, which I’m hoping is because of my light being too close. (Adjusted higher now) It seems to be going OK, nothing great….

The plants are thriving in their 4th week of flowering, and I couldn’t be happier with their progress! 🌟 Adjusting the nutrient mix for the coco substrate has really paid off, and both plants are responding beautifully. The trichome production is impressive on both, but interestingly, the plant without LST is slightly ahead in development compared to the LST variant. 🌿💨 The buds are forming nicely, and there’s already a noticeable aroma in the grow space. It’s predominantly sweet, with hints of something deeper starting to come through. 🍭✨ So far, everything is looking on track, and I can’t wait to see how they progress in the coming weeks!💚💚💚

So it now just about the 3 different Runtz x Layer Cake phenos, yes right 3 of them: 1. The Runtz pheno 2. The GMO dark pyramid pheno 3. The Layer/ Wedding Cake pheno in lilac I need to start to harvest the top crowns now, because they are ready now. I estimate around 7-10 days until they are fully harvested. Also I left 1 mainline from both Bruce Banners for a maximum of narcotic pressure from the hulks, just to clarify the whole spectrum of a plant, from early to late harvest. I think that makes sense? I use my oCoQ- Doktrine with maximum of stress without lockouts, always at the edge with normal CO2 levels (400ppm)😅😅

Well, there’s no ghost the VIVO sun pumps that come with the kits they just suck that’s OK. I replaced them with the upgraded version. I refilled the reservoirs

I put the plants into an NFT system couple weeks ago. I could have waited a bit longer for the plants to develop a stronger root system before placing the rockwool cubes into NFT but I was being impatient because of the slow start and wanted to get the plants under proper light. Now two weeks later they are growing well with good root development. I switched the lights to flowering cycle about a week ago so they should start stretching soon. No preflowers yet.

Tag 35 Die beiden kommen so langsam in Schwung, messen jetzt 35 cm, entwickeln sich gut. Ein Mangel ist nicht mehr sichtbar, Mg wird aber weiterhin gegeben. Wir freuen uns auf die nächste Woche und einen Umzug der kleinen in eine neue Umgebung 😀 Update: Am Tag 40 sind wir endlich umgezogen 🎊🎉 Tag 41 wurde etwas trainiert und getoppt ✂️

Welcome to Week 1 of the Sweet Seeds Gorilla Girl XL Autoflowering grow courtesy of the fine folks at Sweet Seeds! This is the second of three consecutive grows/diaries that I am doing to showcase the tried and tested genetics from this reputable seed breeder. My last grow was a smashing success so I have high hopes for this grow as well. Nothing much to report for Week #1 although I will mention that the first watering was only 0.7 of a litre per plant (0.18 of a litre per plant per day) and the second was 1.4 litres per plant (0.35 of a litre per plant per day). I am watering on my usual schedule of every fourth day as this seems to be the sweet spot throughout past grows. I am using the usual- air bubbled tap water that is PH’d to around 6.0 and if need be (over the winter months in Canada) warmed to 68-70 degrees prior to hand watering with a small watering can. The seedling that lost one of it’s cotyledon leaves is fine but still a little smaller than her sisters. So now on to Mom’s tip of the week… Mom’s Tip for Week #1 is- YOU GET WHAT YOU PAY FOR- QUALITY IS KEY!… When considering growing Cannabis, even on a small scale, quality is an important factor in all aspects from the seeds to set up to the supplies used throughout the grow. Starting with seeds from a established breeder will raise the odds considerably in your favour for a successful outcome. Many seed companies are more than willing to ship out freebies while building up their brands which seems attractive to new growers- but use at your own risk! There’s nothing worse than being halfway through a grow and discovering male flowers tucked in amongst the lowest branches or realizing that your beautiful buds have been mysteriously pollinated just weeks before harvest. I know that seeds from a reputable seed breeder are usually more expensive and can be hard to access in certain parts of the world. But purchasing quality seeds from a reputable seed company is the first step towards homegrown Cannabis success. An area that new growers often overlook due to the high price is the quality of crucial components in their set up- including tent, lights, and intake/exhaust fans. Anyone can get away with cheaper pots, oscillating corner fans, water pumps for dechlorination, etc but it’s worth every penny investing into the workhorses of your entire operation. An initial investment of around two thousand dollars will provide serious growers with the longevity and hassle free basics needed. If done right, quality components will pay for themselves within the first 6-12 months of use and continue to serve your needs for 3-5 years to come. Supplies used throughout the grow are the final area where quality is important but somewhat subjective too. Although I’ve already stated that I don’t feel the need to spend big dollars on all the extras (pots, oscillating fans, water pumps for dechlorination, PH/moisture meters, etc- I do believe in doing my homework to make sure that I’m getting the best bang for my buck. I thoroughly research every item purchased and used in my grows by reading customer reviews, speaking with other growers and sometimes even trial and error at my own expense. Making quality an important factor in all aspects of Cannabis cultivation will benefit you, your grows and the planet we live on. 🌳🌎🌳

Everything went well, make sure to keep prefilters clean on water lines, doh.

Another great week! Buds swelling nice and smelling awesome! Last feeding this week will be flushing getting ready for harvest (Can’t Wait). Picked my first bud off and tried true Indica.