The Grow Awards 2026 🏆
Likes
Comments
Share
@Fatbudz
Follow
in the previous weeks i did too much defoliation. error !! ❌❌ I don't know where my head was ahahah 🤯🤯
Likes
44
Share
This week hopefully i will get some good growth rate so I can perform topping and lst in week 3, my temp is quite high today reaching 34 degrees it just shows the resilience of these little plants. Humidity is at a steady 40% which I don't mind as then flowering plants need that. Day 18 on barneys watermelon zkittles and I changed the light and installed the ac infinityn 6 inch just need to put the filter on but need brackets its a beast lol. All mounted and tested all is good. Tomorrow I will be feeding molasses and phed water and topping the barneys watermelon zkittles. Day 19, good growth nodes are getting longer now, im not sure.if to top and lst or let it run and grow and minor lst and defoliation. Any input would be much appreciated. Day 20 topped and bent over ready for lst in a few days. Showing sex now with white pistols
Likes
5
Share
I've been feeding full strength but giving just water from end of week 10 as I will harvest them in a few days from now.
Likes
13
Share
Week 14, Week 14 was the last week before Harvest/Havrest! I flushed the plant and trimmed her a bit before harvest. I hope you all enjoy the videos and the pics!
Likes
35
Share
Buds evolve greatly, smell is very strong now I noticed some of the buds closest to the lights start to bleach out, i'll let that happen to maximize the lights on the lower branches(there are much more lower buds then ones very close to the lights) Still 2 weeks to go
Likes
15
Share
@MG2009
Follow
09/29/2018 Looking good New pistils popping out, smells of rotton fruit and sweet, it's funny how all 5 plants of GTH X SKYWALKER (Ghost 👻 Walker). All have different yet uniquely similar terps profile.
Processing
Likes
14
Share
Приветствую всех, кто следить за мной. Ваша поддержка очень важна для меня. На следующий день после того как я обновил прошлую неделю дневника наступило время пересадить растения в более крупное ведро. Я покажу вам как использовать дешовые пивные стаканы для пересадки ваших растений. Вы можете посмотреть это на первом видео. Когда я пересаживал растения я дополнительно добавил микоризу в большое ведро. Мои АК-47 показывают сативный фенотип, поэтому они были слишком высоки, поэтому я был вынужден поместить стебель растения как можно глубже и заполнить его, чтобы корни начали расти из него позже. Я также срезал первую пару непродуктивных листьев и побегов с них. Если вам интересно следить за приключениями травки в России.
Likes
36
Share
@Roberts
Follow
Gorilla Glue from AMS is doing great under the Spider Farmer G3000 light. I just changed light times to 12 hours today. So let the flowering phase start 💐. I think I am past most my previous issues. My feed is pretty strong already. So I am not adjusting it yet. I will be going into more of a potassium rich diet while trying to reduce nitrogen levels once stretching is done. I defoliated today and will again more aggressively in 2 weeks. I wanted to open it up for the stretching in hopes it stays more in a bush or more even canopy. I will likely have to hst them if they stretch a lot. Time will tell of course. Thank you Spider Farmer, and Amsterdam Marijuana Seeds. 🌱🤜🏻🤛🏻🌱💪🏻❄️🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash
Likes
28
Share
@OGgrows
Follow
very positive feedback on this strain, requires little attention, the production is incredible as well as the final quality. the buds get fat and very frosty. The taste is very pleasant and besides being a cross with blueberry, the flavor of the strain does not become nauseating, on the contrary, the taste is very sweet, berries and flowers.Dinafem is to be congratulated for this strain from another world. Good Grows for everyone 🍀💚
Likes
6
Share
@mEluv420
Follow
Did some defoliation at 20. april for more exposed light. Watering 3L every 2-3 day ish. A lot of new growth.. So excited for the next weeks!
Likes
16
Share
Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during all the life cycle. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast with only a littel bit of leaf margin burn which I solved by decreasing the quantity. In the first two weeks of flowering stage the plants started grow not to very tall (except for one) and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. During all flowering stage the flowers grown but they remained very soft, they turned dense and bigger in the last weeks and this time i waited until almost all of them were mature before harvest the plants(I waited a littel more respect OG Kush CBD). I changed the taller plant from one grow room to another(in the sixth week) when she became too high and she couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time the plants were full of dense buds but the lower branches had many fluffy flowers(i used them to make some hash) but the result not change too much . The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. I harvested the taller plant before the other two because she had matured earlier(with the OG Kush ladies). Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 126g only of dense buds and 11.50g of hash.
Likes
14
Share
@DsTrees
Follow
*** CURRENTLY DRYING *** Dry Date Start: 3-15-21 Trimmed: 3-23-21 Total Dry Weight: 112 grams.
Likes
19
Share
She continues to look like she has a nitrogen problem.I'm stumped. pehaps its just fading.. or too much nutes ot needs a bit of flushing. will switxh to a less flores more boost and freah water to see how it goes. i still think my ph was a bit high.. not sure if ive seen any diff from feeding at 6.2 with some cal mag early in the week..
Likes
47
Share
Day 48: - Shuffle some plants again to give them better spots. - Did defoliate again to make sure the lights can reach lower buds. Photos and videos where taken before watering, thats why the leafs are not lifted. Nothing special this week. see you guys next week.
Processing
Likes
3
Share
@MOTB666
Follow
Everything's seems to be going good starting to get cramped on space. 1 day after nutient change girls are doing great. Decided to cut a few of the bigger fan leaves that were blocking lower stems from light and just taking up a lot of space. Set up scrog net 7/13 rigged it up as cheap and quick as possible seems to be holding pretty well so far
Processing
Likes
Comments
Share
Growing really well, still think this one will be my heaviest yielding! She’s covered in a thick resin and continues to push pistils out, this one may have the density I’ve been trying to get. I think I’ve finally figured this strain out, looking forward to the bud off this girl. The bud that was pollinated is beginning to yellow, I will likely go ahead and snip that off towards the end of the week when the seed pods begin to open but before the seeds actually drop. Some of the other plants that had buds that were pollinated have already been harvested for the seeds. I left the remainder of the plants to finish up.
Likes
25
Share
@Sators
Follow
Add slightly nutrients. Day Nr 16 doing topping. Nutrient tank with capacity 10L turning little bit in alkaline, at the beginning I added 3ml ph down and reach 6.4 pH, than now it’s inccrise to 6.6 on 5 days time. Same I can telling about TDS. At the beginning it was 350 ppm, but now it’s step up on 400ppm without adding nothing. Day 18 start moving out new branches from places around where was topping. Keep watering with 1.5L with slight nutrients dosage… Day 20 we can see how flower keep moving ahead after topping days ago…
Likes
14
Share
Aloha Freunde der Sonne 😊 Die Tage vergehen und die Damen wachsen prächtig vor sich hin. Immer noch die Höhe der Mädels angleichen auch wenn mal was abbricht 😅 Viel Spaß
Likes
16
Share
Finally coming to an end this week, didn’t get to properly flush the nutrients out to see the leaves begin to fade but next grow i will pay more attention to this. Definitely needed to hold the plant up using chopsticks but hey it worked