The Grow Awards 2026 🏆
Likes
Comments
Share
This week gonna ad plagron bloom. 2.5ml With plagron grow 5ml and plagron roots 1ml.
Likes
5
Share
@CRIM_mir
Follow
OCTOBER 20 (DAY 24): Week four has begun, and I am now so completely full of questions. I’ve got preflowers on at least 2 of the 3 plants, the terminal nodes (is that right?) on all three are looking... uh... busy... lots of long, skinny growth coming out of the bud sites. I am wondering if this means it’s time to start transitioning to bloom nutes, or if I’m a little early yet. On the subject of bloom nutes..... wtf? There are so many options, and it’s hard to tell what can be used with other things and what products are supposed to be direct competitors. This is definitely going to require some trial and error. I’m also not sure what to do about the lights. Because I’m using LST on some but not all of the plants, one is significantly taller than the others (and thus closer to the lights)... this looks like a grow question. OCTOBER 21 (DAY 25): After dealing with a runaway heat problem in my tent and major height discrepancies between the LST’ed plants and the control plant, I decided to reorganize the tent... again. I’ve got my tiny tent in a nook in my bathroom, and there aren’t any ports for intake fans at the bottom of the tent (just windows), so I had been running a small intake fan shoved right up between one of the mesh intake windows and the wall. That didn’t give a ton of open air for the intake fan to draw from, so I rotated the tent 90 degrees so the intake fan has the open room air to pull from. I also raised the LST’ed plants by about 6” so the canopies of all three plants will sit roughly equal. We’ll see if this works. Τoday I fed the plants again. I’m not sure if I am going to prefer to go the FF Bembe route or the AN Big Bud/Bud Candy/Overdrive route, so I am doing a side-by-side on my LST’ed plants. Plant 3 received Bud Candy today, while plant 1 will get Bembe starting next week. I have only been feeding the plants nutes once a week. I’m wondering if I should step that up or just stick to once a week unless the plants start squawking. Any feedback would be much appreciated. TL;DR: To flower or not to flower... to feed or not to feed... to water or not to water... these are the questions. Control plant = winning. ***************************** LST Kit Info ***************************** In case anyone is interested in the LST kit I am using: https://www.etsy.com/listing/831218796/growth-manipulation-kit-for-low-stress Engineered Essentials offers these in two sizes — regular and seedling/clone. I think these autos are small enough that I should have gone with the seedling size, but I have some on the way and will report back once I give them a shot and can compare.
Likes
15
Share
Our Zamnesia Trainwreck automatic concluded its journey with beautiful, long colas. It was a super hot season when we finished, so we didn't have the best resin harvest of the year, but it was definitely worth it just to see these colas. Of course, if we finished late in the hot season, it's only my fault. The strain is magnificent, I miscalculated the timing, and I was sure to buy a conditioner before being forced to relocate. From next season, everything will be super controlled. ** We remind all users that we grow two plants per strain; one worked with specific techniques, and the other left to grow freely and beautifully or worked with uncut techniques to preserve speed. Description // This plant started with a few small problems; I was hesitant for a moment, but then it gave its best, feeling like its usual self. We performed a classic Manin lining with a first cut to create the mainfold at the third internode, then lowered the branches parallel to the ground until they reached the fourth internode on each side, which was then topped again. The branches that weren't growing well were eliminated, and we obtained beautiful, well-formed colas. I highly recommend you try it. Trichomes and maturation // No trichome analysis here; I was late with the move, but you can look at the other trainwreck to see them. It was harvested with about 90% pistils. Fertilizers and soil // We used the Plagron organic fertilizer range, all the recommended additives, and Pro Mix soil, both unfertilized and organic. Calculate the dosage according to your needs on the website ------ https://plagron.com/ The nutrients are available in convenient packs on the Zamnesia website --------- https://www.zamnesia.io/en/11457-plagron-easy-pack-natural.html Take a taste of this strain, it's a cross of legendary strains https://www.zamnesia.io/en/11055-zamnesia-seeds-trainwreck-automatic.html Short Description Zamnesia // Trainwreck Automatic is the autoflowering descendant of the popular cannabis strain Trainwreck (a stunning cross of Thai and Mexican landraces). Much loved for its 70% sativa genetics and sativa-like effects, Trainwreck Automatic is as easy to grow as an indica (even in cold climates). This autoflowering strain goes from germination to harvest in 11–12 weeks, meaning you'll be harvesting sativa buds in no time. It prefers warmer climates, but thanks to its short life cycle, it can also be grown in more northern areas (provided it is germinated a few weeks early when growing outdoors) Trainwreck Auto offers delicious lemon and lime flavors that enhance the classic sativa profile of its parents. Furthermore, thanks to the spicy and earthy notes, the overall experience will be even more intense, regardless of whether you smoke or vape it. In terms of its effects, Trainwreck Auto is euphoric, uplifting and energizing. Fueled by a THC content of around 21%, this strain is perfect for socializing and best suited to smokers who prefer to stay active after consuming cannabis, rather than lazing around doing nothing. The whole world of cultivation and much more is from Zamnesia: just take a look at the site and you will find "all the best that nature has to offer" in various shapes and colors. -- // www.zamnesia.com
Likes
8
Share
@flecko
Follow
Day 71 H20: 3 lt A+B: 9ml Rz: 1.5 ml Zym: 7.5 ml Bt: 6 ml C/mg: 5 ml ============================================ Day 72 H20: 3 lt A+B: 13 ml Rz: 1.5 ml Zym: 7.5 ml Bt: 6 ml C/mg: 5 ml ============================================ Day 74 - 76 - 78 - 81 H20: 3lt A+B: 11 ml Rz: 1.5 ml Zym: 7.5 ml Bt: 6 ml C/mg: 5 ml Been a tough week for my girl. We have had two heat waves inside the past two weeks, outside temps were around 40C and the room got too hot even with my aircon on. Resulted in some yellowing leaves in the center directly under the light. Despite the heat the buds have fattened up but they are still not very solid. So I have put her on straight H20 and I'm checking for amber trichs, then she will be harvested. Before my next bean goes in I'm going to try to get a bit more room by moving a wall. I need to get more cool air going in and it's cheaper than a new exhaust fan at this stage. Only thing now is to choose what Mephisto plant to plant next: Hubbabbuba Toof decay or White crack What do you think should be my first Mephisto grow?
Likes
42
Share
@Dr_Boom
Follow
This was a big girl to harvest. She came in at 417.3 g dry, which is a personal best for me. Additionally, I received 36g of nice trim for my tincture. The buds aren't the biggest I have grown, but they are some of the tightest! I really enjoyed growing this clone. She filled out the tent well using a type of SCROG to get the most out of the grow area. I dried the buds on a drying rack for 10 days, and then gave them a nice rough trim. Since this is all for personal use, I don't worry about making them pretty, just functional. She is a sticky girl, and gummed up my scissors more than once. That is a good problem to have! I put the trimmed buds in my Grove 1/2 gal bags for the cure. I have found these bags to be EXCELLENT to cure my buds. No burping is required, they preserve the terps, and keep the humidity between 58 and 62. Perfect! My best harvest to date!
Likes
Comments
Share
@BlumenBot
Follow
Took off all of the tops from the shoots that were getting tall. Mayne a bit too much we will see how she responds. Tied down the 4 mains to the edges of the pot. Need to top the 2 remaining mains towards the end of the week when she recovers from today's stress. Needs water, may do a full feeding this time.
Likes
3
Share
N'hésitez pas à me contacter si vous avez des questions! Pour préparer votre solution, dans votre réservoir ou arrosoir : Mettre en premier la base (Iguana) Ensuite Ancient Earth Et enfin les bactéries ASSUREZ-VOUS D'UTILISER UNE EAU DE BONNE QUALITE (EC < 0,2) POUR DE MEILLEURS RESULTATS. J'utilise un substrat non enrichi pour permettre le meilleur départ à mes plantes. Il s'agit du Promix de Plagron, il a une EC proche de 0, c'est pour cette raison que je commence les engrais assez fort dès le début. Les plantes sont très gourmande sous LED haute intensité et l'enracinement est rapide. J'arrose tous les 3 jours environ avec 2 arrosages à l'engrais et 1 à l'eau par semaine. Je n'attend pas que le substrat sèche complétement sinon ça réduit l'efficacité de l'arrosage, ça détruit la faune et éventuellement facilite la cristallisation des minéraux. Au niveau du volume d'arrosage, il faut prendre en compte 1/3 de la taille du pot. Pour un pot de 1L je vais donc arroser environ 300ml. Pour un Pot de 10L je vais arroser environ 3L. Il est important d'arroser doucement pour éviter que l'eau ne coule tout de suite au fond. Il est important d'avoir au moins 15% de drain pour s'assurer d'évacuer tous les nutriments non consommé et faire la place aux nouveaux. IL EST PRIMORDIALE D'EVACUER L'EAU AU FOND DES COUPELLES, c'est une eau qui est chargée en nutriments non consommé et on ne veut pas qu'elle remonte dans les pots car cela risquerait de créer des blocages. Au niveau de la technique de taille de formation, je réalise tout de suite une FIM que je reproduirai dès que l'apex aura repoussé. La première FIM est la plus longue mais les suivantes sont très rapide car la plante s'habitue à la technique et cela la stress beaucoup moins. En général il faut reproduire la FIM tous les 3 à 4 jours en fonction de la vigueur. C'est une technique très facile à mettre en œuvre et ne demande aucun matériel. C'est aussi la plus rapide pour obtenir des buissons. N'hésitez pas à me contacter si vous avez des questions concernant la FIM! Je retire également les feuilles supérieur (pas toute pour éviter de ralentir la plante) qui cache les secondaires pour augmenter l'efficacité de la FIM sur la croissance des secondaires.
Likes
3
Share
Iniziamo bene con mister Barney farm...poi con la runtz non si sbaglia mai... forza 💪belle piantine mie datemi tanti fiori 😂😂😂.la runtz è sempre una buona scelta
Likes
4
Share
Starting 2º flora week
Likes
13
Share
Die Blüten werden immer dicker. Vorallem die Grapefuel Gelato und die Lemon Orange explodieren. Auf den Blättern werden bei allen auch die ersten Trichome sichtbar.
Likes
10
Share
Harvest day 66 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚 Very nice phenotype with an extremely good smell. Growth was normal after the initiation of flowering. Looks beautiful with its jagged leaves 😃. As always, the Green House fertilizer did a very good job and I can only recommend everyone to try it out🚀 Have fun and stay healthy 💚🙏🏻
Likes
26
Share
@Batista
Follow
This week we increased the quantity of fertilizers and transplanted it into a 5 liter container. Next week we will start LST. The total height decreases due to the transplant. We use mycorrhizal fungi (Mykos) in the transplant.
Likes
10
Share
@Raizativa
Follow
Han presentado carencia de calcio y magnesio
Likes
20
Share
This was a real fun strain !! Definitely do it over and over again ! Thank you Fastbuds!! I’m not sure of the weight yet ,I have them hanging low an slow for 12- 14 days to try then will be trim , cure , the fun stuff!✌️Peace, love, and Positive Vibes to y’all cheers 🔥😤💨💨💨💨🤙 I will be letting know the final weight soon as it’s done drying!
Likes
57
Share
Hello my friend, ...June 24, 2022..Day N°94... ...Flowering day N°48... My Feminized Tatanka Pure CBD is beautiful and fine. I never known that a CBD strain could be like that, very gud hard buds and smells exotic fruits. I love her.😘 I am growing CBD for my son and my brother, me I am a THC junkie. I gave her water with a tablet of Easy Plus Micronutrients from RQS Organics Nutrients. She's under a Mars-Hydro Tsw 3000 at 80% of power and at 20cm of the canopy. www.royalqueenseeds.com www.mars-hydro.com That's all for now my friends, thx for passing through here. Wish you the best with your green projects. See you soon..💨💨💨
Likes
Comments
Share
@spastagia
Follow
Hey all, She is doing pretty well. Trichomes are stacking up. She is smelling fruity and a bit of sourness to it. I am going to flush her once this week. Did some defoliation. Nothing much!
Likes
35
Share
@valiotoro
Follow
Hello everyone week 1 has passed for this Gorilla Cookies auto from Fast Buds 😎 this plant is doing very well growing at fast pace and with a beautiful green colour on the leaves. Spider Farmer SE-7000 50% wish you all happy growing!
Likes
12
Share
All good. Ripening process. I think they’ll need 60-63 days. Blue Zushi has amazing terps but the stability is very poor. 3 beans , 3 completely different phenos and completely different terpene profiles. Have 3 more growing in nursery. But wouldn’t recommend a big run with these. But there could be a winner to be hunted.
Likes
3
Share
@NidoR420
Follow
Another disaster on day 2 of the week :pp previous one avoided as the repair held tho, but a huge storm roughened her up this time :( it snapped one of the upper branch, I was also able to repair it so let’s see. However, her soil was really dry and she was bending at more than 90 degrees, which probably broke a few if not all roots. I’m waiting to see how she evolves, she also lost a lot of stability since then. But at the end of the day she’s at the end of her flowering, around 20% ambers 80% cloudy and nearly no white pistils anymore. I still need to flush her so finger crossed Final week!! She’s ready, will harvest somewhere during next week. Added additional pictures & videos :)) not super visible on the picture but she actually shows some purple trichromes! Look a bit maroon-ish on the video but I confirmed it’s not mold with a lens. I think we’re around 30% amber 70% cloudy now, probably will harvest it all at once.