White widow just found the solution yesterday. She should be able to make some good growth. Everything is looking okay at the moment. Thank you Seedsman, Spider Farmer, and Athena. 🤜🏻🤛🏻🌱🌱🌱 ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Day 36 week 5 22.01.2020 Plant is doing great but atm the grow rate is slowing down a bit or maybe it’s just me !!! I did cut her down quite a bit and that’s maybe why , other then that strong thick branches and a low profile like I wanted !! She’s ready to go into the bloom box as soon as I free up some space there what should be in a few days to a week !! She’s getting 2 best spot under lamp but still a prime spot I would say So from now it’s getting interesting so stay tuned

Was soll ich sagen bei mir ist jede Woche top habe einfach Glück nur die kleine wedingcake will nicht so recht los siht man im Video sonst ist mein Garten top in Schuß wie man sieht 😎🙏man hört sich bis dann

Amazing results! They’re 2 weeks (14days) in bloom today! Flowers are developing everywhere with this one! I had to make an edit on one of the stems as I had no more room on the pulley and had to snap a stem and bend it sideways! (Super crop) can’t wait to see what happens with it as the last time way Ago in the past I accidentally snapped it after bending it as it heals firm and I didn’t realise but this time no mistakes even got her tied as I had to bend her twice as the first time she sprang back to position! Hope you like 👍

Healthy and consistent growth. Plant is a little smaller, i think that's due to location in the tent. Buds look good.

Not a lot to report this week all is good she's bushing like crazy defoliate one day she's a bush the next will be stripping some of the bottom and inside this week. She's demanding more feeding and is looking nice put a wrong pic up so just edited it thanks for reading happy growing guys

In der achten Woche erreicht diese Kreuzung aus White Runtz und Spritzer (Seeds of Anarchy, via Wunderbohnen) eine beeindruckende Dichte. Das Aroma ist mittlerweile voll ausgeprägt: Ein süßer, fruchtiger Duft nach reifen Beeren und weichen Bonbons vermischt sich mit einer eleganten, floralen Frische, die den gesamten Raum erfüllt. Tatsächlich hatte ich vor einigen Tagen schon festgestellt, dass sie irgendwie 'runtzig' duftet – ein Zeichen für das komplexe Terpenprofil. Die Buds sind inzwischen so massiv und schwer geworden, dass die stabilen Äste unter der enormen Last sichtlich gefordert sind. Obwohl die Struktur bisher hervorragend standgehalten hat, wird es nun Zeit, die Zweige zusätzlich zu stützen – ein erstklassiges Zeichen für den Ertrag am Ende dieses Testgrows. Die Harzschicht überzieht die kolossalen Blütenstände wie ein frostiger Teppich und kündigt die nahende Ernte an.

Lit

Wonderful color😈 The smell is divine🤩 The trim was super easy & the buds are dense & super sticky👌

Moin an alle diese Woche habe ich die Damen auf 12/12 gestellt alles läuft soweit nach Plan die einzige Dame die mir sorgen macht ist die Dame vorne rechts sie wächst sehr sehr dicht bewaldet hat wohl etwas mehr indica gene abbekommen was jetzt nicht wirklich ein problem ist allen Pflanzen geht es soweit gut. Ich bin mit der Umstellung auf 12/12 um 1 Tag verrutscht eigendlich ist immer Ende der Woche für mich am Donnerstag somit also Freitag Umstellung auf 12/12 habe ich auch gemacht schalter auf blüte gestellt und vergessen die Zeitschaltuhr um zu stellen das viel mir dann abends auf als die Lampe noch lief obwohl sie hätte aus sein sollen somit habe ich sie den Tag noch 18/6 gehabt und bin erst am samstag 12/12 gefahren somit verschiebt sich das ende der jeweiligen woche auf Freitags, (ich bin halt zu stoned unterwegs zur zeit, was heißt zur zeit! eigendlich immer 😂😂) am anfang dieser woche gab es 20ml/L orgatrex und 1g/L bactrex, davon aber nur 500ml der lösung an die Basis für die lösung verwende ich destilliertes wasser damit die Bakterien schonend dem Medium zugeführt werden, beim normalen giessen ohne Nährstoffe verwende ich abgestandenes Leitungswasser was einen Ph von ca 7,8 aufweist was ich mit Ph down von GBN(Green Buzz Nutrients) runter regel auf einen Wert von 6,5 was super funktioniert bis jetzt! das Boden leben scheint äußerst gesund zu sein, die Pflanzen wachsen gut und robust, weisen ein sattes Grün auf und haben bis jetzt keinerlei Schädlings Spuren, Mängel oder Überschüsse an Nahrung. Bei meiner Lampe bin ich mir nicht ganz sicher habe sie jetzt zur blüte auf 75% der Leistung laufen da ich Schiss habe das wenn ich auf 100% fahre meine Damen sicher licht brand bekommen werden also muss ich abschätzen 75% und mit der Lampe nach und nach ran gehen oder 100% und bei ca 60 bis 70 cm bleiben ich Weiss nicht genau was ich machen soll oder eher gesagt was besser kommt....... Naja das wars für die woche.!

Perfection💯💯

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

This week was good for the Cream auto. I performed some defoliation and undid the LST for a couple days as well as raised the lights to 24" to induce some stretching. I did selectively begin LST on the Cream towards the end of week 5. She has been getting 1/4 strength flower nutes and recieved a fresh top dressing of hot soil coco coir mix; as her roots were surfacing. So far so good. Atleast 20 budsites are visible and she has responded well to all the training and is coming into her stretch period. Now all we are waiting on is them white pistols to start shooting at the budsites. Hopefully week 6 will entail this! She should be at about half of her life span at this point. 4-5 weeks more of flower is expected before harvest.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

D1 is a bit more hybridy than D2 (and/or just stronger). No tiredness from D2 D1 tastes amazing in vape, better than D2 but something about D2’s smoke is nice - the geranium undertones. Bottom line D2 is perfect day smoke After curing 3 weeks: D1 lemony and sweet, really good flavor profile D2: earthy-floral (ocimene), woody-pine, def most unique odor profile Flavors: D1: lemon (w grinder), apple (top note), sweet (top note) D2: berry (?), flowers (geraniums), tropical (?), pine; spices (not sure which)

Day 50, 5th of November 2020: Fucking hell in the second video i just broke the tray LOL.... Anyways... The lamp has been switchet to 12/12 for 4 days from now she is streching and has a nice smell :) No training needed just waiting.... Fertilization happens more often like every 2nd day and more of the BioBizz family raised up to be 2ml/L haha ;) Bye.

📅 D77 - 16/01 📜 Almost ready, Waiting for final flush ✍️ 1.5 EC ♒ 9 pH 🌊 10 L 📏 90 cm 📅 D80 - 19/01 📜 Final flush started ✍️ 1.5 EC ♒ 9 pH 🌊 10 L 📏 90 cm 📅 D83- 22/01 📜 Not yet ready - 3-4 days more I think. Suggestion accepted ;) ✍️ 1.5 EC ♒ 9 pH 🌊 10 L 📏 90 cm