Likes
Comments
Share
6° Semana- Aeroponía - Están muy bellas las raíces, están 100% sanas. Se realiza poda apical al quinto nodo,una pequeña defoliación y luego se aplica LST a las más grandes, muy contento con el crecimiento actual. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 6th Week- Aeroponics - The roots are very beautiful, they are 100% healthy. The fifth node is topped, and a little defoliation and then LST is applied to the largest ones, very happy with the current growth.
Likes
14
Share
Week just starting off and the one baby has still not broken thru so I take matters into my own hands and attempt emergency surgery!!! I sanitized a Raw loader stick and gently pulled the sprout up. It laid over after and I'm going to give it a few hours before I try to put something to hold it up if it doesn't manage to orient properly. Any advice would be appreciated, This week just started so will edit it throughout the week.. 11/18 Transplanted into 1ga pots and gave first n00tz FF 3tsp/GA Big Bloom. 11/19 Ok so my humidy has been plumiting to 33-36% so I tried putting a rag over a fan, putting a rag in a bowl over the inlet and nothing helped so I went to amazon and bought this! https://www.amazon.com/gp/product/B08GQZDS9J It has a gallon or so tank and a humidity sensor so it cycles to maintain humidity. 11/20 Anyways humidifier shows up today and I kicked it up to 80% and its about 70% after 4 hours.. I'll drop it down once the babies get to growing a bit more. I'm actually worried I transplanted too soon. Shout out to my boy Jeff! And a smaller shout out to James! 11/22 So no real changes the last few days, the plants still aren't thirsty so holding off on that. I did rearrange grow tent to allow me to set up a camera to capture time lapse of the process and I had to get some power to it so it doesn't cut off when the lights go out hehe. I mean all is well I guess, I'm still concerned bout my little plants and the one with the crooked stem. Although I'm thinking the more I keep hands off right now the better chance they'll have! Wish me (and my babies) luck! 11/24 So everything looks smooth, today I uploaded a time lapse of the last couple days which if you speed thru it can see movement of the plants which is cool, but I'm stressing that my 3 way meter isn't correct. Its reading like 6-7 on moisture scale after about 7 days of being on the same water/feeding. I am anxious to water again but don't want to overwater...I mean I do feel some moistness if I press down on the soil. I'm quickly learning this is a great means to work on your patience!!! Oh and I'm rapidly losing hope for the bent girl, so sad.
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/10- Here we go again with another killer strain from FastBuds, Strawberry Gorilla! I went ahead and germinated 4 seeds originally by first soaking in a glass of tap water for 12 hours then placing in pre-moistened Peat Pellets, of which all four were successful. Two however looked like they they might not make it, so I germinated 3 more by first soaking for 12 hours, then placed on moist paper towels for 48 hours. I checked them on the third day and all had sprouted. I then planted the additional 3 seedlings next to the ones already in pots and will wait 5-7 days to see which look the best, then cull the 3 'losers'. 10/12- Yesterday, I went ahead and ran the AirCube system manually today to give them their first feed. I have the reservoir filled with 60L of well water which was adjusted to 6.2ph @ 75℉. I then added 60ml each of Plagron Cocos 'A' and Cocos 'B' and 30ml of Plagron Power Roots to the reservoir and, after mixing thoroughly, readjusted the ph to 6.3 @ 75℉. I then ran the AirCube system on the 'Fill' setting for 10 minutes. While the system was filling the pots, I used a soil hydrometer to monitor the moisture level in the medium to make sure that I had the floats in the 'Brain Bucket' that control how much solution flows through the system adjusted correctly. Everything worked flawlessly with all of the pots getting saturated, then fully drained... excellent! 10/14- I ran the AirCube system again today after checking the ph of the reservoir which had risen to 8.0 due to off gassing of CO2 which occurs because of the large air stone I have in the reservoir to oxygenate the water in it. I adjusted the ph to 6.2 using SaferGrow's PH Down which BTW I love! After adjusting the ph, I ran the system manually for 10min, then drained it. I have the HLG 650R hung @ 28" above canopy and have it set to 45% power on a 19/5 cycle via a TrolMaster HydroX Controller. Tent temp's are running 80-82℉ with the lights on, 74-75℉ during the dark cycle. RH is being maintained by a 1.5g humidifier at 63% currently resulting in a 1.41kPa VPD. 10/17- Well there goes the first week for these three girls and so far, so good! They all have good color and leaf structure and I'm just waiting for them to take off now. I ran one manual feed cycle today for 15min upping the ppm's to 700, then drained the pots. I'll start gradually increasing the feed schedule along with the ppm of the nutrients starting next week... See you there!💚
Likes
3
Share
So finally this week the plan was looking strong enough to be trained, initially I've lift the plant from his seedling bed, i moved her more on the side of the tent to have more space to bend her and give more open space to the lowest branch, after just 12 hours the plant was already fighting the training pointing the top cola to the closest source of light
Likes
8
Share
Comienza un nuevo cultivo hidropónico de la mano de unas Glueberry de Dutch Passion en un sistema re-circulante de 3 contenedores de 20L mas 20L de cisterna.
Likes
12
Share
Starting week 2 Veg - See below for specs Nutrient feeds remain the system Height - 2 inches (Not much progress in height) Width has definitely grown out Water feeds continue to be everyday - Have a gallon+Nutes Light Intensity - 100% *Mid-week review - 8/18* Introduced Cal-Mag (4 ml/Gal) Plants grown approximately .5 inches in height - 2.5 -3.0 inches in width Light Intensity 100% *End of week recap* (08/20) Both have grown about 1 - 1.5 inches in height and 2 - 2.5 inches in width. Fan leafs deep lushes green Bud sites topped Thus far all is running smoothly.
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
5
Share
@Godsgrace
Follow
💫The week went great. After the first stress, growth seemed to slow down, but it worked out, the plant began to expand. I water it every 3 days. I continue to bend the stem along the axis of the pot. I bend the branch that will pass through the fastest. 💚I started giving supplements late. Only on the 33rd day I gave him fish and everything else. 🍀 Week showed good growth, but it could have been better, let's see what happens with the additives. I continue to twist the stem in a circle (I don't know where to twist it). And I also cut off the leaves a little bit, about once a week, as they block the light (a friend says not to overdo it with defoliation, let's see what happens).🍀
Likes
10
Share
@Jerrza
Follow
Plants doing all well, few more weeks to go
Likes
22
Share
Day 57: Watered each plant with 1L with nuts 1588 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1690 ppm, 3595 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 60: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC Day 62: Watered each plant with 1L with nuts 1726 ppm, 3712 us/cm, 3.7 EC (purple punch, strawberry banana, wedding Cheesecake)(I gave them more than usual, by mistake) 1528 ppm, 3525 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 63: Watered each plant with 1L with nuts 1563 ppm, 3325us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1523 ppm, 3301 us/cm, 3.3 EC (gorilla cookies) 2 different feedings for the 10 plants Day 65: Watered each plant with 1L with nuts 1518 ppm, 3210 us/cm, 3.2 EC (purple punch, strawberry banana, wedding Cheesecake) 1359 ppm, 2891 us/cm, 2.9 EC (gorilla cookies) 2 different feedings for the 10 plants Next feeding I will start to flush some plants, 1st week with flawless finish, 2nd week clean water, 10x the pot, 150L each Day 67: Watered each plant with 1L with nuts 1379 ppm, 2908 us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1250 ppm, 2687 us/cm, 2.7 EC (gorilla cookies) 285 ppm, 606 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Started to flush all the strawberry banana and 2 purple punch with flawless finisher. (1st week flawless finisher, 2L each, 2nd week clear water, 150L)
Processing
Likes
6
Share
She's responding super good to lst method she looks absolutely gorgeous I would have loved to be able to grow her since march however It was not posible but I keep this wonderful indica in my list. This wonderful pheno of Alien gorilla has started flower the 3rd of August.
Likes
10
Share
After surviving a wicked thunderstorm last weekend the Devil's still stand tall. I was able to get some branches tied down and everything secured. Tallest girl measures just over 9ft, up above the app will only allow me to enter 118 inches as the most for height when the tallest plant is 126 inches tall. The peak of the greenhouse frame is 8ft. Been having a hard time keeping Monster Bloom in stock so been using slightly less and compensating with Alaska Morobloom 0-10-10. Stepped up the Purpinator a little bit to 1 1/2 tsp, and plan to > as flowering continues. Hopefully in this next week they blow up with calyxes. Was also considering reintroducing my waterproof lights in places to be used during the daytime where light is scarce. On the other hand it's kind of nice having a lower electric bill, haha. HAPPY GROWING TO ALL!
Likes
19
Share
@MaxMo8
Follow
Day 24 Second topping .🤕🤒
Likes
3
Share
Likes
79
Share
@Salokin
Follow
Hello Growmies! 🌿👋 Welcome to Week 17 of our Epic Buzz journey! We're observing some noticeable progression in our plants, and we're nearly at the finish line with the next entry poised to be our final harvest week! Here’s the breakdown for our Epic Buzz phenotypes: Pheno #1 is thriving with its buds thickening up nicely, showcasing a frosty appearance that promises high-quality resin production. Pheno #2 remains a bit smaller in comparison, yet it's catching up with an increase in bud density and trichome development. Pheno #3 stands out with its robust growth and resin-packed buds that are slightly ahead in terms of maturity compared to its siblings. As we approach the harvest, maintaining optimal environmental conditions—consistent humidity and temperature—is more crucial than ever to maximize their potential. Stay tuned for our final week's update, and as always, stay lifted! 🚀🌱
Likes
46
Share
@Targona
Follow
Targona: 29 days since my little girl sprouted from seeds🌱 Fourth week of vegetation of my Apple Fritter Automatic 🍎🍏🍎 Nutrients: I use Advanced Hydroponics Of Holland nutrients - three basic components, still according to the table for growth during the flowering period 💓 - - Dutch fertilizer Formula 1 Grow - supplies the plant with substances necessary for the perfect development of roots, stem and leaves; intended for the growth phase 🌾 - Dutch fertilizer Formula 2 Bloom - contains a large amount of nutrients necessary for rapid growth and fruit development, supplies the plant with energy; intended for the flowering phase 🌸🌿 - Dutch fertilizer Formula 3 Micro - increases oxygen intake, improves plant immunity, ensures better absorption of nutrients; intended for the growth and flowering phase 🌴 ----------------------------------------------------------------------------------------------- Plagron Power Roots - Root Stimulator Plagron Roots is a biological root stimulator that supports the formation of the root system. I use it until the fifth week of growth 🍃🍃 - I fertilize for the last time in the fifth week of plant growth. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Calmag - The special Calmag supplement was designed for professional and hobby growers who need to supply their plants with calcium and magnesium in organic quality for a long time or immediately. The 100% organic 💩💩 and certified BioBizz Calmag product is made of calcium carbonate and magnesium sulfate supplemented with humic acid. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Bio pH - is an organic pH regulator. An aqueous solution of citric acid, which occurs naturally in citrus fruits 🍋🍋 ------------------------------------------------------------------- ---------------------------------------------- During the flowering period, I add Advanced Nutrients stimulants: - JUNGLE X Environ is a highly effective complex preparation for stimulating flower formation. 🌸🏵️ - Bud Candy - carbohydrates for my girls 🍭🍭🍭 General: Apple Fritter Automatic 🍎🍏🍎 - The girl started to bloom beautifully, so I changed the fertilizer dosage to match the flowering phase, and also added carbohydrate + flowering booster🌿💚 The girl grew a lot in height, I had to raise the light and I'm worried that her little sisters won't quickly reach for the light 💡🌞 Training: Classic, I continuously perform defoliation and small LST - I tie up the branches that grow towards the pot just like the others so that they don't shade each other's buds💚🌞🌞 Light: Mars Hydro TS1000 The plants respond effectively and the light is technically very well managed - I try to have 50 cm between the light and the plants, so I regularly move it up 💡💡💡 Thanks for the likes :) See you soon 😍😍
Likes
20
Share
Fed/watered with 1 gallon of the above listed nutrients, every 3 days. (when the growing medium becomes 95% dry) Gave her a light selective de-leafing, to open up the inner bud-sites to more light. The timelapse shows me why I won't be transplanting like this again. (Slow growth/lost time from constricted root mass)
Likes
5
Share
Week 2 under the TS1000, another week to go and the girls will start flowering 😁 excited about all these yummy fastbud strains! The next week i will add another TS1000 to this girls as my other grow will finish!
Likes
6
Share
Buds starting now. Seem a bit slow. Keeping an eye on environment. Possibly bit cold when lights off