I have had problems with snapping bud sites off when attempting to train during my entire grow, but I have been getting more and more skilled at bending them over without breaking them. I didn't quite do a good enough job (in my opinion) of spacing out the Colas as I was originally going to ScrOG on top of my LST and Topping, but now I think I will just see how they grow. I wish I was more confident in my skills and could try to use the screen I bought, but I am very worried the stems are now to woody/hard and will start breaking if I attempt to put the screen on now. I plan on flipping to flower in the next 5- 6 days or so, then flowering them out for 9 weeks if possible. Should put me at harvest some time in late May/early June. Thanks for tuning in! If anyone can advise me on how to set up my screen I'd be ecstatic! Happy GROWING :)

Defoliated then cut down. They are full of autumn colours 😍 after drying they averaged 65-70g per plant, not bad for 1ltr pots. The high has an old school feel to it, it's very tastey but I don't smell or taste pineapple at all, more a car Polish/strong parsnip smell in the background. Recommended and after a 2 week cure very strong for an auto. I will grow again at some point.

VallyFruit 2 cut for a personal treat I got one more for seeds with FireBerry pollen doner!

78

Here we are at the magic moment, the first hairs are coming out of the internodes and here and there, our Do Si DOs F1 Automatic reveals its sex and of course like all Zamnesia plants I will be the father of two beautiful girls. One is growing straight but I will show it to you later because I had so much fun making this one you see in the photo is a sort of bonsai worked with Topping at the beginning, then LST to create a main lining for three internodes, then anchoring topping and last on the lateral growing branches. Really pretty I can't wait to see it in flower We won't see the super productive trees of the autumn harvest but I'm willing to bet that we will have so much beauty and so much resin. Wait for the uncle BreadandBuds.... We are still using soil, feeding and all the recommended additives from Plagron 100% organic. We have moved on to the flowering start schedule that keeps the same Power Roots additives - Sugar Royal, Pure Zym and adds the flowering stimulant dear in my house for obvious reasons of Biscotti. Of course the basic fertilizer is now Alga Bloom. The Green Sensation when the flowers are already a bit swollen, do not start immediately. The Power Buds must immediately stimulate the start and development of the buds. ---- Decide on the right soil and calculate your fertilizer schedule based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy.. ---- https://www.zamnesia.io/en/10664-zamnesia-seeds-do-si-dos-f1-automatic.html Zamnesia Description // From the team at Zamnesia Seeds comes Do-Si-Dos F1 Automatic. Using consistent and reliable F1 genetics, this strain is not only incredibly easy to grow, but also offers potent and delicious buds. The plants remain small and offer a reliable growing experience that everyone will enjoy. All the best that mother nature can offer is on ---- www.zamnesia.com

Hello everyone 😎 A wonderful genetic thank you Dutch ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 134g !! For the light i’ve used the Mars Hydro FC-E6500💡

Beginning of the 10th week of flower. Shouldn’t be too much longer now. I will add some bud and trich pictures this week.

[Same like widow] Transplanted in new home pot smart 420 super soil and humboldts root powder white widow

To update, just keeping the photos up to date

First week of pre flowering, just changed the schedule of the lights and the photoperiod

Day 50 (1/25/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 775 Water temp: 64°F pH: 5.8 Day 51 (1/26/21) Heavy defoliation today, I chopped every fan leaf on each node of the main stalk. Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 775 Water temp: 64°F pH: 5.8 Day 52 (1/27/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 775 Water temp: 64°F pH: 5.8 Day 53 (1/28/21) Seeing great growth again, I used a little bit less water to up the ppm Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 800 Water temp: 64°F pH: 5.8 Day 54 (1/29/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 800 Water temp: 64°F pH: 5.8 Day 55 (1/30/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 825 Water temp: 59°F pH: 5.8 Day 56 (1/31/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 785 Water temp: 64°F pH: 5.8

| 📅 Week 0 | | 🎪 4ft x 4ft | | 🍃 201 CFM | 11/06: Soaked 6 blocks of rockwool and the hydroton in 5.8 PH water to stabilize before contact with seedlings, 11/07: The germination of the seeds were started directly inside the rockwool that's lightly damp with 5.8 PH | 📅 Week 1 | Days 1 - 7 | 💡 450w 📏48' | | 🌡️️🌞 77 - 86 | | 🌡️️🌑 70 - 77 | 11/09: After 2-3 days of germination 4 seedlings have sprouted and the last 2 have cracked their shells and are making the climb to the light! Were going to let them stretch a little to better fit into their final netpots. 11/10: Plants placed in temporary net pot for more space under dome. Added water + air-stone to increase humidity from under the net pot. 11/11: Added water the the seedling with a dropper at 5.8 PH. Lowered the light to stop the stretching. 11/12: Added 5.8 water to the seedlings/rockwool with a dropper. 11/13: Adjusted Light some more. Added 5.6 PH water to seedlings with a dropper. 11/14: Added 5.6 PH water to rockwool through a dropper. Removed humidity dome for temperature. 11/15: Hydroton for final netpots soaking in 5.8 PH water. Added 5.8 PH water to seedlings. This Diary will be a little bit different. While the comments will include the whole tent and all the tasks done in it, the timelapse and vast majority of the pictures will only be about the focus plant for a better lapse experience. 😎

😎

Now comes the fun part. As some friends of the fantastic Growdiaries community pointed out to us, we begin to see that the waiting time is about to be repaid, the peaks are taking on their final shape and I believe that shortly, after a good final blowjob of various boosters, we will leave for a flush of at least two weeks

This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned

As you can see, the Melonade Runtz hermied again... Mystery Made 2 also started but I already had the feeling this is going to happen, since everything inside this tent hermied. The first runs I threw in the trash (besides the one King's Juice survivor, you can see my diary on as well) but I now needed some weed and I had the little hope that MAYBE if I keep plugging the male parts off, that she eventually turns full female. I saw that in one of Hyperactive Highs videos and just gave full dedication into it, controlling every single day. I really spent hours into this but as you can also see, the Melonade Runtz was the frostiest out of the bunch, so I really didn't throw her away! On the bright sight: I managed to achieve quite an even canopy for now. They also shouldn't stretch too crazy from here on out

Our number #17 has already had a few days of flushes, it has been cleaned of a few too many leaves and now it looks very good as the main cola is predominant in the classic indica style but also the secondary flowers further down look oily and a great color. Almost ready for the cut https://seedsmafia.com/en/ https://www.mars-hydro.com/

🗓️ WEEK 3 (veg) 💧 Her water uptake increased noticeably (about 1 LT/day), and the new leaves exhibit a perfect, healthy color. Due to this increased demand, I raised the EC to 1 to ensure she receives adequate nutrients. 🌱 The difference in growth between the start and end of this week is significant. The plant continues to stay quite short and compact, which I don't mind at all, especially considering the space limitations experienced during my last run. Naturally, this time, both the environmental conditions and the genetics are entirely different. Similar to last week, I concluded the week by removing a few of the lower leaves growing too close to the substrate. This week, I set the light power to 100 watts, keeping the same distance.

Not sure why the other seeds didn’t germinate. One of the other Bananacane’s started to but died off upon sprouting