01/08/18 - I fed them all 1 litre each, one of them seems to be praying up but the other two Seem a little bit droopy still. 02/08/18 - #3 is praying like usual and the other two are getting better Day by day I’m going to be giving them another feeding tomorrow, I have seen roots stretching out to the sides of the pots so I might saturate the whole pot. 04/08/18 - horrible sight today looks like rusty cracks in some leaves , not got a clue what this. 05/08/18 - browning has continued since last night and it’s all on the new leafs not the older ones. i fed them without any calmag , so I think it could be a deficiency of some sort (cal/mag).the mad thing is, it’s only two of the girls, one of them is completely fine nice green leaves not yellow marks that turn orange/brown. It definitely has nothing to do with my ph or all three girls would be showing some symptoms seeing as they all get fed with the same soloution.✌️🏻 07/08/18 - everything’s cleared up their was slight nute burn in the process but everything seems a lot better so I decided to start LST. all the new leaves are the colour they should be with no nute burns or calcium deficiency 🙏🏻

She's getting close now! She has bulked up and all her branches are starting to bend over. These aren't the biggest buds I have grown, but they are very dense and heavy. She should be a good yielder. I'm going out of town for the 4 day weekend and by the time I get back, I'm sure she will be ready.

Today is day 74 since planting, so in theory I should have about 2 weeks to go. The taller plant will probably make that, the shorter may take an extra week or so. Overall, pretty boring week, as the buds are at the tail end of fattening up, should be right on the edge of ripening. The bud structures of the plant continue to be completely different, with the taller plant having a more typical sativa appearance while the shorter plant has dense, stocky nugs more like an indica. I'm just excited to see the end in sight. At this point in the grow I just want to harvest and start my next batch, but one of my growing mantras is " let the plant tell you when she's ready to be cut" so I will continue to wait impatiently until a vast majority of the trichomes are milky. Thanks as always for checking out my diary ✌️

Wish I could have vegged the clones another couple of weeks but the Zkitzo was just growing to fast. In hindsight shouldn’t have put a plant from seed in with the clones. Seeds always grow like mad in NFT and clones are more manageable as they don’t have a tap root. Still got some absolutely beautiful looking and smelling bud from the Zkitzo so can’t really regret it. The Gelatos are rock solid right through and look absolutely beautiful. Used rainwater right the way through on this so should smoke nice to. Better pictures as it dries.

Day 67: Increase in flower size phrase has been finished now they about to go into the mature phrase. I will eighter flower them for 1 or 2 weeks depending on how it goes. Might only give them water with enzymen,regulator and humic for now on, that Is basicly flushing ( ec 0.7 ). or Ill just slightly feed them( ec 1.4-1.6) for a few times before I start flushing them( ec 0.7). Again I took the pictures before doing work on them ( watering and defoliation), so they look a little sad. I did notice that many of them got burned tips, indicating that they get more nutrients then needed. It does make sence since In this week and weeks to come, they need less nutrients and having a harder time taking it. Yet they do drink everything in 1.5-2 days, so they still do like to get nutes. Thats all for this week.

First glimpse it’s perfect. Now I will cure the buds in a jar

Week 10* last week messed up,70 days today from seed,what defiency(looks like k)are We looking at on a few of the leafs,any advice tips anything growmies,happy growing

Only keeping damp with water at the moment

Week 4 in da house. Plant is short but bushy. Leaves look very strange. I will start LST in coming days. Day 23 - LST done right after watering 2L with nutrients. Day 28 - End of week 4. Great progress, plant is getting bushy, a lot of side branches. But its growing unevenly, with some strange leaves. Peace.

Beautiful growth on the plant without nutrients for now. Added a top soil using my new soil and it is packing with amendments and nutrients, so for now will depend on that. Maybe in about a week or 2 will start a nutrient feeding. But overall happy with the growth, and still hoping it’s a female. Just did a fimming for today (10 December 2021). Let’s see how it goes!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Super critical bud X New-York Diésel la phénotype numéro 1 a l''odeur typique sativa Skunk, la numéro 2 pour l'instant pas odeurs mais chargé en boutons.

Time to cut this one down to dry

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. https://seedsmafia.com/de/

Está en si es la semana 11 pero colgué una semana en publicar. Ya coseche a principio de semana la whithe widow y dejé los bajos para principio de esta semana que entra y cosecharla junto a blue moby que está hermosa, moby Dick empezó a remontar vuelo y avanzo muy bien y está formando lindas flores gordas

Thursday this week has been good so far, I pulled each plant out yesterday and tidied everything up. I got rid of all the tiny lateral branches that didn’t make the cut and I got Rid of everything that was below about half way down the plant. Obviously the lateral branches that grew to the same height as the canopy are staying it’s just all the non starter stuff below. I annoyingly had my in take fan die on me. We’ll sort of, it just keeps tripping the fuse on my electric so I assume it’s from when I had my res flood onto the floor - I forgot it was there on the floor because it was hidden behind the res

El día 19 de floración se hace poda de brotes bajos y una pequeña defoliación de hojas de abanico 👍

Easy to grow. Only issue I ran into was the other strain being a male. If I grew this strain alone I would’ve filled out the tent with just this strain the yield would’ve reflected that. Keep in mind if the other plant didn’t get the chop this yield would be almost double. I will grow this cut again.

Harvested around 1 week ago, slowly drying with around 22° and 60% humidity. 3 different phenos. N2 Is the best about of 3. N1 is biggest one but buds quite small. N3 is not as frosty and dense as 1 and 2.