Bonjour a toutes et à tous , bon dimanche .. je passe juste vite mettre quelque photos (je n ais pas trop le temp en ce moment , je vais être opéré mercredi donc pas mal de chose à préparer) Je passerai (si tous ce passe bien ) fin de semaine vous mettre des photos des plantes hors de la tante histoire de voir les filles plus en détails. Je vous dit à très vite (enfin j espere:)

Week 9 for this absolute specimen of a female Shes still fattening up incredibly, normal colas are forearm sized, poly cola is getting on for leg sized proportions 😂😂😂 Still a bit to go on her too, awesomeness Smelling like proper amnesia now unmistakable 👌😎👍😁

Good week. Everything is going great. Plants are still stretching. Could of done more LST but running out of space. Have a few strains going in the same tent. All got pretty big

23.08.24: I've done considerable defoliation. Also, FBP1 and FBP3 have grown all over the place. The stems are also relatively weaker as they've grown so much. (Photos above). Being as the plants were looking a bit delicate, I added some string and tied the side branches lightly to keep them a bit more compact. Additionally, FBP2 has a considerable amount of buds on the main cola. So I've added a plant stake, and I just tied string around the stake and the main stalk. The humidity has been able to stay under 53%. That's with 3 dehumidifiers. So I'm pretty sure that's about as good as it will probably be. I've had to lower the watering frequency on FBP3, as I overwatered only this plant. and also added too much Nitrogen in. As a result all the leaves are looking droopy. I'm really not sure how this will pan out, as they all still look like they're weeks away from harvest. Anyway, I'll update throughout the week. 25.8.24: I was tending to the garden a majority of the day, and realised that a branch had broken on FBP2. I acted quickly to insert plant stakes, to provide the heavily laden branches additional support. See photos above. The branch was bent or snapped, but still in one piece. I used duct tape to carefully put it back together. Before making a stake for it. Silica, apparently wasn't quite enough to get the FBP2 through the whole way. The flowers are very heavy and dense. I have also given the plants water yesterday with concentrations of the following nutrients, per plant. ● 9ltr of dechlorinated tap water with 6ml of cal-mag, 3ml of Ecothrive Flourish, 6ml of Xpert Nutrients Bloom Booster. I have also added cinnamon top dress after watering, as I have noticed some fungus gnats. I checked the trichomes through one of my loupes yesterday too, and nearly all are still glass like in appearance, with some cloudy here and there. I'm definitely going to have some time left on these girls. I did check the PH if my soil on all plants as I was concerned about nutrient lock out on FBP3. All pots tested out at 7.0 Ph exactly, before and after watering. Thanks for reading my diary 😊

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 30/11/2019 - Struggling with high humidity, change led strip color from red,green,blue to red and green. 1/12/2019 - Checked and adjusted the light distance. 2/12/2019 - Pot feels light and dry, gave her 1,5l PH 6.3 with a 1/4 of recommended Biobizz nuts, notice almost no run off. 3/12/2019 - Finally her first pistil appeared on the main stem I was starting to get worried.

Glad with the results. The purple punch and the Blue gelato 41 already has a strong smell, girls are healthy all is going well.

Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...

Watching the time lapse shows me how my plants are doing throughout the day. Unfortunately, I am only setup to download the data once a week after the grow has already happened. I noticed on the one from week 5 that there would be times it would show growth, and then later in the day start to droop. I figured this might have to do with my watering schedule, I did not want to over water, so I only did it every 2 days. Then I bumped it up to 1.5 days, but now I am watering every morning and that seems to have helped a bit after watching this weeks video. Next week should show better results I hope. So far each time I check them they seem to be doing well. I would like them a little taller, but I can't complain on how they are doing. I upped the nutes a bit this week as well. Do you think I should water more than once a day? When is the best time to water, just before they start daytime or just before they hit nighttime? Or somewhere in between?

Det går fint det kommer nok lige lidt an på hvordan man ser på det;) jeg prøver dobbelt topping og pt går det virkelig godt og jeg kan også se på bladenes stilke de er helt RØD/LILLA 👌💚😘🤗🙏🏼💚glæder mig til at se 👀 hvordan den kommer til at se ud u fuld blomst og med buds

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around

Week 2: Standing Tall & Pushing Leaves! 🌱🍭 General Vibes: We are officially into Week 2 and the Mellow Jelly is showing some real character! The jelly is definitely setting nicely. She stretched just a little bit reaching for the light during the first few days, so I gave her a little help with a gentle wire support to keep her standing straight and strong. Nothing to worry about, just typical seedling behavior as she establishes her root zone. Environment & Setup: Light: Still running the Agyrochy 100W LED at about 80% power. Because of the slight stretch, I'm keeping a very close eye on the distance to give her enough energy without causing light burn. Keeping it at a steady 18/6 cycle. Temp & Humidity: Keeping the environment super stable for the baby. Temps are hovering right around 24-25°C and humidity is staying high around 70%. My Tuya Smart controller is doing its job keeping that VPD right in the sweet spot for early veg! Feeding & Watering: Water: Still keeping it very simple. Giving her pH-adjusted water (dialed in around 5.8 - 6.0 for the coco mix). I am watering lightly in a small circle around the base to encourage those roots to reach outward and expand. Nutrients: Not pushing anything heavy yet. She is doing perfectly fine living off the light nutrients in the substrate. I might introduce a very light dose of root stimulator soon, but for now, less is more. Observations: As you can see in the pics, her first set of true serrated leaves are fully out and holding a beautiful, healthy green color! The next set of leaves is already starting to push through the center. The wire support is doing its job perfectly, and if you look closely at the stem, you can see the little trichome fuzzies forming as it begins to thicken up. No signs of stress, no deficiencies she is happy and enjoying her habitat. Hasta aquí todo familia 🕸️ , un saludo y buenos humos fumetillas💨💨💨 Let's see how much she grows by next week!

Spider mites have taken over my plant. I've been taking leaves off and lost bud sites because of this issue. I'm broke til tomorrow so I can't buy any products. At this point I'm thinking of just throwing the plant out and starting fresh. Yes it's has come along way but damn the spider mites are worse than bed bugs at this point

Alright grow cycle, mistakes, improvements, etc... She did stay in veg for too long, her growth was slow and not the best and so she took quite long, next time i'll be there from the beginning so I can take care of her throughout. But her growth is really fun. It is a tall growing sativa with fairly tight noding when trained accordingly, producing long filled colas. The buds grow fairly dense and fluffly but do air out a little when dried. Trichome production was pretty impressive as well as terpene production. She had thrips since her early days but did not seem to mind them at all. I did spray them initially but once flower started I stopped. I believe predatory mites might have been feeding on the pupae in the soil, if that is what this specific species of thrips did, the reason I say that is I could never see adults only larvae. Whatever the case maybe they were there but the population never really increased. Something I did not mention during the grow is that those plants were played music during the days, music that is apparently developed for plants. The 10L pot was WAY too small for a true sustainable living organic and to provide enough space for the plant, that was a mistake, I'd say a 20L would be the bare minimum and still. The bigger the better. The hempy transfer did not hurt the plant and I believe even helped to some extent, BUT, I am still running test on the subject and so can't confirm anything, here are my observations Roots did not colonize the perlite, a little on top and the sides but that was it, I was expecting to see a big root mass in there. I believe hempy are great for salt fert as it hold a soup of nutes where the plant can feed from since the coco only holds very little Whereas in nature most nutrient are in the top soil where the highest amount of decomposition happens, this is where the highest microbial activity happens and so where the plant will find food. Living organic is trying to reproduce nature and so there is no need for the plant's roots to gather at the bottom of the pot. Although it could have potentially provided the plant access to a larger amount of water and possibly more oxygenation of the pot. Those are all theories, please speak up if you have other proofs. In conclusion , unless i get proven otherwise by someone or my latest running experiment , I will not be using hempies again as I believe it brings more complication and issues than a simple fabric pot. The lights, The 600w at the start was good, then I decided to add a 400w...😂 That was completely overkill and not necessary. Waste of electricity. And they started suffering from too much light it seems at some point, I raised the light by a good 30 cm and they were fine. 600 is more than enough. I am happy about how the soil performed but it has room for improvements. As for the watering technique I have been watering large ammount every few days, next time I will be giving constant small amount of water each day and a soak every week or so, I believe the soil might perform better under those conditions. She was also an easy plant to harvest whit her long colas which had very little foliage, I do trim in excess as I like my buds extra clean but the buds are not excessively bushy. The trims were use to make some bubble hash, around 100g of wet trims yielded around 1.5-2g of bubble hash. I did add a negative effect but only because it wouldn't give me a smile otherwise, but to be honnest it barely dries your mouth. The soil is going to be recycled and reused in a next grow. I can't think of anything else at the moment but if you have any question don't hesitate.

Piante spettacolari degne del nome che portano, Per me è stato un onore poter coltivare questa speciale genetica in onore del grande Franco Loja🙏❤️❤️

Fire

The tomato plants will finally move outdoors permanently on Tuesday and will be transplanted into their 30-liter pots. Next year, my plan is to start the tomatoes later and use 3-liter pots during the early growth stage.

They are strong. The no4 girl is huge, had to top her, no lst and going to flip her at young age with the rest of her sisters

X

Day 64: Worried about those yellow marks, can't be overfert, it's prolly stress from LST...