Likes
Comments
Share
Pheno 1: strong natural tart cherries with a slight candy Pheno 2: loud cherry candy Pheno 3: cherry fun dip Pheno 4: cherries mashed with earthiness Pheno 5: the strongest cherry pheno I’ve ever smelt. Just loud cherries in your face. I kept pheno 3 and 5. I pressed both into rosin and the terps were insane it smelt like I worked a double at the marischino cherry factory. The terps on 3 were cherries on the inhale with a candy fun dip exhale (absolutely up my alley). Pheno 5 was the most in your face cherry I’ve ever tasted. It was straight cherries throughout the inhale exhale with a slight tart/candy on the back end. I have found my cherry phenos for my future business. Thank you for riding this journey with me. Harvest results on my YouTube channel link in my bio!
Likes
16
Share
Rough week, had to flush the bigger plant to fix lockout. Did 15 gallon flush with ph balanced water, the last bucket of 5 gallon had 50% strength nutrient, minus the flora Micro which I will stop using for the rest of the grow. I installed my scrog net, only about 30% of the net is filled. The second smaller plant doesn't even reach. I sent the height to 18 Inches from the base of the plant. I lose 10 inch from pot I also lose 18 Inch from light and carbon air filter 6ft tent max I lose 2.5 ft. Only 3.5 ft to grow. Going to increase nutrients to 75% strength and only give cal-mag 1x a week as the support team told me to do so. Heavy trimming and defoilation. I will spread the plant and any branches wanting to pass my screen will get topped until the tent is filled. I took 5 clones from each plant, some of the thin long branches that were not getting any light. I am starring my first dwc grow at the same time in my 2x3 tent with my gf. Unsure if I will have a small soil run the same time. The plant is starting to smell strong, honestly like stinky armpit mixed with cat piss. I am not turning on carbon air filter yet, I like keeping it humid during the veg cycle and I keep RH around 40-60% when I turn on carbon filter.
Likes
8
Share
@jaydee702
Follow
bubba cheesecake tiny pot grow is doing very well its growing fast and thick still no sign of gender yet after 2 weeks in 12/12 tent should see what gender soon im sure its female because its was a femenized seed planted.
Likes
15
Share
Week 2- All 4 Cream Cookies are looking good. Very similar looking seeedings at this point. I harvested the larger plants that were in last weeks diary and moved all seedlings under my 315w CMH fixture. The fixture is 24" above the plants. I'm going to keep all 4 indoors in my tent for another week, then move 2 to the outdoor garden. I'd like to see 2-3 nodes before transplanting. I also have 3 gallon self-watering pots ready for transplanting the 2 that are staying in the tent. I've never used self-watering pots before, but 'The Rev' (from Skunk magazine and True Living Organics) swears by them. They don't actually water themselves, I'll still have to add water manually. But there is a reservoir at the bottom for the roots to be able to feed off of. Supposedly, once the root network is established to the bottom I'll be able to add water to the reservoir only. I'm following the Fox Farm feeding schedule, but at 1/2 strength. So this week is Big Bloom only. I also added CalMag and some Recharge. I'm starting another diary in a few minutes for the other plants I have going on. Look for it soon! 😉
Likes
70
Share
@Roberts
Follow
Big Fat Wedding Cake is growing great under the Spider Farmer G5000/UVR40 lights, in the Athena blended line nutrition. She got lollipopped today, and a defoliation. She is also showing her first pistils. Thank you Spider Farmer, Athena, and DutchFem Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)
Likes
1
Share
- Purchased an AC Infintity Cloudforge Humidifier - Switched to flower nutes - Installed Trellis Note: - No more apparent deficiencies - Surprisingly there is very little stretch
Likes
166
Share
@iMeus
Follow
Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs
Likes
1
Share
@Cannerd
Follow
I'll be updating the comment with the daily log shortly, but figured I'd get the photos and weekly overview up. I started off this week with a topping at about the 4th node, leaving the larger fan leaves on for now. I then left then alone for a bit while I waited for the new branches at the nodes to grow out, rotating as needed. By the end of the week, they had all bushed back up with new foliage and growth. I also included photos pf the flowering mother plant to keep up with that sneak peak. She still wasn't showing signs of flowering, so I gave her an extra 24 hours of darkness to hopefully kick start the process. As I went to go shut unplug the light source, I noticed that there was a smaller light leak from one of the vent ports, so I also made sure to close that up. At the end of the week when she started to show signs of flowering, I defoliated her to help with light penetration, as she's got massive fan leaves. You'll see in the photos that I took that opportunity to decarb the trim as well. I'm sure there's little to no THC-A, but whatever other compounds are present should make for a nice addition to some butter later on down the road. I just won't factor it in when approximating the potency of the final product.
Likes
9
Share
Likes
10
Share
Sooo! Now i started the mainlining... what a bad feeling it was chopping her down! :( But i guess its a bad for a good (you get the idea of the expression..) So I will clone the little side branches from the top apex to get some more babies, but i won't be very much focusing on them since the girls i want to show for the contest, are the two mother plants. I did a small video, hope its gonna be viewable. Sorry for the pics taken under the grow light... The plant that i topped and bent, got some light leave changes, if anyone is commun with those symptomes plz leave a comment to teach me right :) Keep the growing going! Dearest L_C.
Likes
7
Share
GER Bruce banner - Seeds Genetics Co. fail replace with Bruce Banner 3 - Zamnesia Seeds clone Adjust strength light 25% LUX 10000-11000 first week 1 day 23/02/2023
Likes
2
Share
@DjHairy
Follow
This was my second grow ever. I started with a blueberry headband seed from a bud I got from the dispensary. This strain was very easy to grow and very forgiving. Final product had some seeds but wasn’t too bad.
Likes
11
Share
This week I added 9 ml of nutrient per gal of water to prepare for switching to flowering. Grow 5 inches this week getting ready to start flowering. I lowered the light to eight inches which really had these plants growing faster and thicker.
Processing
Likes
2
Share
@BigHorn
Follow
This week had some growth but it has definitely slowed but the smell has gotten more potent. At the end of this week I will be harvesting this beauty. I will post weight and pics when I do. I will be flushing the plant the night before than harvesting the flower.
Likes
31
Share
@MrJones
Follow
MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 03.29.21 / The girls are just stretching like crazy, by far the tellest Autos I have grown thus far, I have the same strain ging in my closet with the same nutrients, but different lights and they not even as close in height. They are loving to FOOP as well. ▶️Tuesday 03.30.21 / Continuing to feed about 30 ounces per day - noticing a bit of yellowing on the leaves and going to look at letting pots dry out a bit. ▶️Wednesday 03.31.21/ Fed about 30 ounces today. ▶️Thursday 04.01.21 / Decided not to feed today, going to let the ladies dry out a bit. ▶️Friday 04.02.21 / Fed about 30 ounces today. ▶️Saturday 04.03.21 / Fed about 30 ounces today. ▶️Sunday 04.04.21 / Fed about 30 ounces today. 🔹🔹VIPARSPECTRA XS1000 LED🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj
Likes
9
Share
After 35 days of vegetation we send them into Flower. They get 2 hours less light every day until we reached the day/night-cycle 12/12 hours. we have noticed that they have already started their stretch. they grow 5-10 cm every day. We water them with bio grow for the first time.
Likes
4
Share
The beginning of her tenth week! Wow, this has been a long one, but we figured that we want to get the best yield that we can from this plant and for grow scheduling, we don't mind letting this one veg out a little longer anyways. We really wanted to see what we could do with this plant and if we could in any way, reverse the stunted growth, but it seems to be a mixture of stress/genetics. We aren't fussing though, it has definitely been an interesting learning experience as we have gone along. Much earlier in the plants life, after topping, one of the nodes had been accidentally broken off and the plant seemed stressed out by that, as well as a transplant to a larger pot, only to find out it was too large for what we wanted to grow. At the end of the day though it has all been a fun learning experience and this is definitely a seed we would like to try and grow again. We have another Ice Wreck plant currently vegging (about two weeks) and if we like the pheno, we plan to keep it as a mother plant. Feb 26 - Ice wreck has shown some decent growth over the last few days so we figure that its time to stop vegging this one out, after 10 long weeks, and this sunday, at the beginning of her 11th week, we will be throwing her in the flower tent, to start the next part of her journey. We can't wait to watch this plant stretch during flower and see just what she is fully capable of. We expect a decent amount of growth, but nothing too crazy as she is a small plant to begin with.
Likes
23
Share
This grow was pretty simple ! They went a total of 103 days from seed! Very trichomy dense buds with the smell of Berries vanilla and skunk ! This is a must try for you all Fastbuds has the greats!!!