The A. Gold plants is measuring: 17 inches and received pH balanced water and nutrients/ approximately 34 oz per plant. We’re also trying to keep the humidity down. Normally the Dehumidifier helps a lot but it’s hard to keep down when it’s about to rain outside, hence why this week’s humidity is 81 degrees. Any tips would be helpful.

My first seed didn't make it due to technical difficulties, so I popped another to try to maximize the output from the mini machine. She is growing well at day 7. Seeing some leaf curling from her adjusting to the environment, but she is still showing steady growth. She is a week behind the 2 plants that were originally germinated. She will be topped around day 10 or 12 as soon as the third node comes up enough to pinch off. I started this setup to compete in the solo cup challenge, but I needed something that will be minimal maintainence and doesn't require hand watering. So this is what I ended up with. I will not be entering since I know it will bring controversy, but I am going to follow the rules and treat this grow as if I am competing. I didn't want to use regular solo cups because last time I had a lot of algae growing in the root zone when I harvested. I opted to use a black light proof cup. These cups were 27 oz originally so I filled them with 16 oz of water, marked the level, then cut them down to 16 oz. I set the drain pipes about an inch from the bottom so they have a little reserve if I have pump or power issues. I know people will see the drains as a way for roots to grow out of the cup but in reality I have to keep the entire pipe free of roots or it will clog and overflow. So I am actually losing a little volume due to this. I filled the bottom inch or so of the cups with river gravel to stop the perlite from washing into the reservoir. I am running a 5 gallon reservoir with a small air pump and the plants will be getting irrigated 24 hours a day from an aquarium power head pump. I set the system up to be totally self contained and easily portable. It was all built from things I had laying around other than 97¢ for the cups. I will be keeping the feed simple as always feeding maxigro and maxibloom with a couple flower boosters.

The final week is upon us. The buds glistening with trichomes, the smell is strong and pungent. Buds are tightening up and getting heavier, stems can barely hold the weight. Next week ✂️ I only gave plain water this week and added once 2ml/L of Flawless Finish

I have decided to harvest a little bit early so spider mites don't come back and the weather is favorable for drying this week. After the chop, I also did bud wash with 3 buckets: 1. 5 gallons of water and a cup of lemon juice and a cup of soda bicarbonate 2. Warm water 3. Coldwater There were tons of nasty stuff left in water. After washing I left them to dry under a fan and shook them off to remove as much water as possible and then put back into the tent to dry with a dehumidifier and outtake on with 2 oscillating fans NOT pointed at the plants. Humidity is currently around 55%. After the first day of drying, I realized I will not be able to control good conditions in my tent for drying so I moved the plant to hang dry in the climatized room for a second day. During the second day, I trimmed buds and removed stems and then put them in brown paper bags to slow down the drying process. After 2 days of drying buds now weigh around 240 g, Humidity spiked to 87% outside on the third day and I had to constantly run A/C and a dehumidifier to keep the room at around 20 C and barely 55-60 % humidity. Grew tired of this so I tried something new from the third day. It's called Lotus curing and drying and works with any frost-free fridge. I put brown paper bags with buds inside the fridge at around 7-12 C and the humidity in the fridge is around 40-50%. I also have temperature and humidity probe in one brown paper bag so I can react if it dries to fast. Humidity is hovering around 70-80% currently and my plan is to manipulate humidity inside the fridge by opening it, adding moisture, or regulate temp so humidity drop as slow as possible. When it hits less than 72% when tested outside the fridge in the room temps I will start normal curing process in jars. After a week of drying in the fridge, jars are in the drawer curing right now. I sample tested one Dynavap bowl and flavor is decent with the sweet scent but it still needs a bit more time to be perfect. High was the same as my first Sweet tooth grow, the main thing I felt after finishing Dynavap bowl was calm and relaxed with time slowing down.

She received 100ml of made solutions of an E.C of 1.7 before I repotted her she has received no water. She is about 10 cm with long internode spacing. Another set of five fingered leaves coming through the peak. Maturity is on the horizon. The next feed signs of wilting!

Day 31 in Flower Did a double dose of everything at a high feed this week. Nutrients are mix with 10gal of Spring water won’t be feeding for the next 2weeks due to high volume. I’ll be adjusting the ph every 5-7days until reservoir is empty. Also got some pretty long branches on the Oreo Stumper tallest branch got light burn on the buds should I leave it there or cut it off & and how much should I cut off if so?

Harter ritt diese Dame , alles viel zu schwer das es gleich umknickte beim defolieren . Hab mal ein getrockneten Bud aus der mitte genommen und Trichom analyse (Videos und Bilder) gemacht . ja viel klar wenig milchig und einige rot . Ergo , zuviel Licht an der Spitze (abstand zum licht viel zu gering) und im Boden zu kalt ist keine gute Kombination .

Good week. A little more sun, summer is definitely Here. No big stretch but that’s expected and wanted with the topping. She’s growing very bushy, might have to remove some leaves soon. Planted basil around her and it survived and is strong. Read that basil increases terps. I’m enjoying the leaves.

Ams M.O.A.B got chop down no wet weight taken. Her smell is of a citrus blueberry with a fuel smell. Yield was lost due to errors made in the water res system other then that everything turn out amazing. The UFL3000 light system did a amazing job on bud production an bud density.

Daily reports: Day 1. • Watering: In - 6.1 pH 470 ppm (0.75 l); Out - 6.4 pH 871 ppm (0.4 l). • Stats: - Height - 10.0 cm (Bent) - Temp - 27.5 °C - Hum - 78% • Notes: My very first LST started! I hope it will increase Heracles strength and body mass 😤 Day 2. • Watering: DRY DAY • Stats: - Height - 9.5 cm (Bent) - Temp - 27.7 °C - Hum - 73% • Notes: Bent Heracles two times today, will not do it any more. When she will grow a bit more - I will bent the main stem round the pot, so there will be a lot of space for secondary stems in future. Also some space between the ground and the stem will be handier to handle the plant. Day 3. • Watering: DRY DAY • Notes: Found a signs of magnesium, I think it's enough of drying. Day 4. • Watering: In - 6.2 pH 504 ppm (0.75 l); Out - ??? pH ??? ppm (0.00 l). • Stats: - Height - 11.5 cm (Bent) - Temp - 29.1 °C - Hum - 78% • Notes: It's too hot and too wet for the plant. I have to do something with that. Two days without watering made no difference - the coco is still wet (pot is still heavy). No drainage after 0.75 mixture poured - I didn't expect that! Day 5. • Watering: Day: In - 6.1 pH 573 ppm (0.75 l); Out - ? pH ? ppm (0.? l). Night: In - 6.0 pH 573 ppm (1.0 l); Out - 6.2 pH 1020 ppm (0.75 l). • Stats: - Height - 11.5 cm (Bent) - Temp - 27 °C - Hum - 75% • Notes: Did another round of LST today (accidentally broke one fan leave). Fed right after that. Found a green mfucker and tried to kill it but now I can't find him and that sucks. Day 6. • Watering: In - 6.1 pH 921 ppm (0.5 l); Out - 6.6 pH 921 ppm (0.15 l). • Stats: - Height - 13.0 cm (Bent) - Temp - 27 °C - Hum - 70% • Notes: Bent Heracles one more time. Now it's 4 side stems bent, main stem bent as well and one side stem grows vertically. At least six separate stems, not bad for the first LST experience! But I hope there will be more before flowering. Day 7. • Watering: Day: In - 6.2 pH 974 ppm (0.5 l); Out - 6.5 pH 780 ppm (0.2 l). Night: In - 6.1 pH 1020 ppm (0.5 l); Out - 6.5 pH 874 ppm (0.15 l). • Stats: - Height - 12.0 cm (Bent) - Temp - 26.2 °C - Hum - 62%

So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥

She is growing great and right where I want her. I mainlined her on day 14. I topped her above the third node and left a small stump. The stump will swell which helps keep the main from splitting later in life. I cut everything below and will the down the new growth.

🗓️Day 107 🗓️Day 67 Flower 16/08/24 Saturday The time is NOW 😋😁👏🎉💚

They are an amazing plant to work with easy and robust they love the inviroment and are starting to smell amazing combined with the lights and climate control its a breeze don't have to do nothing the un topped one is a monster 3.5 ft hopefully fill right out thanks fast buds 💕

It's flower time!!! Really excited for this phase of the plant cycle, and love watching them develop. She's drinking more frequently right as I'm ready for s vacation! I setup s self watering drip system and the rest run was a success!! Below are the days of activity since the last update: Day 34 1 gal distilled water 1/2 tsp Cal-mag 8g Simpro bloom formula Day 37 1 gal distilled water 1/2 tsp Cal-mag 8g Simpro bloom formula Pulled 8 leaves adjusted LST Hope all my growmies has a wonderful rest of your weekend