Hey growers. This week I decided to water with a heavier ppm as the plants didn’t seem too happy. They were showing some yellowing on the lower leaf tips. Guess I was right bc they exploded up to about 12” +-. Then I decided to top and LST the main stem. Today I just adjusted the ties, removed 1-2 leaves from each plant depending if there was any in the mud or not. Yesterday I watered with 525 ppm, but unfortunately the water was a bit on the cold side and they’re having trouble soaking it up. I have since created a rez in my grow room just to hold RO water at approx 70 degrees. So that problem should be rectified. I think I’m right on the cusp of preflower as I’ve seen one or 2 pistils. Regardless they’re doing their thing and I’m trying to do as little as possible to keep them vegging as long as possible and end up beastly!!! Happy Growing 🌱

Day 43 - We are all set for flower, garden is happy, vibrant and healthy. She will be flipped after this to 12 -12. Not much to report as all I've done is LST/bending and defoliation. So not a lot of stress on the girls. Hopefully this encourages stress free plants that will give me some big fruits. Follow the YouTube channel please guys ( Link on profile here ) Stay safe and stay blessed.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Booommm! Llegó la hora tan esperada Farmers nuestras flores llenas de resina acabandose de formar, la verdad que estas genéticas ayudan mucho al desarollo del cultivo espero que os guste!! Un banco seguro y confiable para una locura de olores y terpenos!!💚

Dia 49 desde cotiledon, realizamos primera poda apical. aplicamos tambien una vez por semana NPK, un riego con fertilizantes y otro sin. la semana que viene ya aplicaremos melaza tambien en el riego. y por otra mezcla los preventivos de insecticida y fungicida. También aplicamos tierra de diatomeas tanto arriba del sustrato como en las hojas! espolvoreamos y despues rociamos con agua, quedarán las hojas blancas 😝

Last 3 days before HARVEST👨‍🌾 ⛺️ MARSHYDRO 💡VIPARSPECTRA 🍼GREENHOUSE FEEDING BIO GROW 🌱 WEEDSEEDEXPRESS

So It's been a great week! Apologies to anyone following as I'm a couple days late updating the diary this week due to work. Anyway, bud growth is really coming on! They're starting to fatten up nicely and the smell is just fantastic. Lots of trichomes as you can see from the pics and her parentage is really starting to show with those lovely bright orange pistils. The addition of PK warrior has certainly given them a boost but I have a feeling she is going to need longer than the advertised "8 weeks" to fully mature. We will see. Have a good week. 😁👍🌴

The Bubble OG plants are looking awesome! My tallest one is stacking up with super dense buds. It's crazy to think that the other one is almost ready to chop – the colors are so vibrant. And then there's that short and squat one with the purple leaves. It's definitely the oddball of the bunch, but I kind of like it. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.

All is well.

Love how beautifully she is growing! She’s 12 days in transition now so 2 days away from 2 weeks in bloom basically (since I switched to 12-12) so interested to see where her stretch will cease! She’s no longer on raises now and is now climbing above the girl that was already in bloom! (Iced grapefruit) and now stands an inch above her when I started I had the plants raised to match her height and now it will be visa versa! And so many flower sites too! Amazing progress! I pulled her ties for the last time too to allow the lower branches to gain more light but I’m done with that now as it’s opened enough and is now working on them lower branches too! But she’s such a beauty! Has flower sites all the way up her branches!

Dia 84 en el proyecto A con tan solo 3 meses se han hecho unas bestias de plantas, gracias a la buena genetica al clima y a la tabla de elicitación y nutrición de terranabis , increible no me lo esperaba como estan de grandes en tan poco tiempo. Ahora han empezado la fase de floracion y incrementamos el terrateina y terravigor de terranabis , vamos a ver que cogollos nos sacan las variedades de prueba de paradise seeds , ansioso por verlas madurar.

She finished strong, I wanted to push her another couple days but started showing signs of necrosis in ways I wasn’t confident in letting her go longer.

Cantaloupe haze needed a good flush brought runoff from 2000 ppm to 1100ppm will continue to monitor.

Toca cambiar las lamparas que hemos estado utilizando durante el periodo vegetativo, con un espectro lumínico más azul (entre 5000ºK y 6500ºK), por unas mixtas de 2500ºK. Más adelante las cambiaremos por las definitivas 2000ºK. Es importante decir que realizar fotos o videos bajos lamparas de floración, no ofrece un buen resultado... Así que a partir de este momento voy a utilizar un filtro corrector en las imágenes que muestro. Sigo regando cada tres días, alternando entre agua+Bio Rhizotonic+Bio Vega y riegos solo con agua. Llevo un diario de cultivo en una libreta y los principales cambios en una pizarra.

Flowering day 15 since time change to 12 / 12 h Hey guys :-) This week the ladies developed beautifully 👍. The stretch has started very strongly :-) . Watering was done twice this week with 1.2 l (see table above for nutrients). The heating mat does exactly what it is supposed to do, you can see that the ladies are doing perfectly again 😃. Fresh osmosis water was mixed with tap water in a 100 liter tank so that I would have enough stale water for the coming week 👍. Otherwise everything was cleaned and checked. During the check, I noticed that after spraying neem oil 3 times, there were still a few damn trips to see. I have ordered nematodes for leaf and substrate against tripse. Then they should finally be gone again 🙏🏻 have fun and stay healthy 💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Partially drained the tank at the start of the week and topped up with ro water and 1ml of final solution per Litre. Last 2.5 days were in darkness. I trimmed the majority of fan leaves before hanging up to dry in the tent today. Started out trimming with the plants in the tent and soon realised it would be much easier to just cut them down whole, hang them upside down outside the tent and trim them up a bit. I have a small dehumidifier and a small fan heater setup in the tent and they have been keeping a humidity level of about 60% and a temp of 16 Celsius for the last few days while the lights have been off. I figure that's a good starting point for drying and I can increase the temperature if needed, that will drop the humidity also. Intake fan at the bottom and extract fan at the top are running constantly as they have been since the grow started (low power 4" fans). I might add back in a fan for circulation depending on how the drying goes, or maybe even trim or hang the plants better to get more airflow around the buds

Trying to keep away as I fear my meddling caused my hermie's. I found a light out, luckily I have 2. Looking for an upgrade now. Will use the remaining light as a backup. End of week, I have 3 x "600w" LED lights. Total draw is about 360w. 2 white (with added red) and one blurple in between them. I need to fix hanger system to keep them close, but not too close to affect cooling.

Really happy with how things are looking. 2 of the 3 plants have gotten some benders added so I can hopefully score a few more bud sites in the next few weeks. Keeping feedings low and steady- should have probably increased them a bit by now, but I’ve got some burnt tips and I really don’t want to throw things off. 🌱 👊🏻