Aquí tenemos otra de las maravillas de Sweed Seeds, uno de mis bancos favoritos, son capaces de crear autenticas maravillas de la naturaleza y tuve la gran suerte de que su equipo me regalara unas variedades unicas para poder analizar su comportamiento y crecimiento. En este caso tenemos una CRYSTAL CANDY XL AUTOMATICA de una talla alta de 4° generación. Esta genética ha sido desarrollada dentro de un programa del Departamento I+D+i de Sweet Seeds®️ enfocado en la búsqueda de curiosos, exquisitos y sutiles aromas dulces que evocan sensaciones aromáticas de tienda de caramelos. El aroma es muy dulce y afrutado con tonos aromáticos de chicle y gominolas de frutas, con pinceladas de fresa ácida y melón maduro. Gran productora de cristales de aromática resina y hermosos cogollos. Produce plantas que fácilmente superan el metro de altura. Por todo ello y mucho mas iremos viendo su crecimiento y desarrollo 😊 veremos todo lo que esta preciosidad es capaz de darnos MUCHO HUMO 🚬 😃 Día 1: Hemos germinando la planta en un mini-invernadero con una luz LED de 20W y una temperatura de 28°C con HR de 70% Día 2: La plantalula va a un ritmo bastante rápido. Ha cogido 3cm de altura sin problemas 💪 Aun tiene el cascarón que tiene que soltarlo, aunque si no es así se lo quitaré con mucho cuidado 🤭 Día 3: He transplantado a la pequeña a su maceta final dentro del armario de cultivo con un sustrato de Top Crop y Biobizz en una mezcla de 70/30. Todas las macetas cuentan con 3g de Micro Vita para protegerlas de plagas. Hoy tocó riego de 1L de agua con 1ml de Deeper Underground (enrraizador) para que su sistema radicular crezca fuerte y sano. La temperatura del armario es de 30°C con una HR de 60%. He tapado con tierra 2cm el tallo para que crezca con fuerza y no demasiado espigada dejando únicamente 1cm en la superficie. Día 4: Hoy hemos vuelto a regar ya que estoy trabajando con un foco HID de 400W que emite bastante calor y el sustrato absorbe demasiado rapido el agua. Estoy teniendo algun problema en cuanto al control de la HR ya que baja bastante por el calor que hace. Este problema le estoy resolviendo con el humidificador y con un pulverizador para mantener la humedad correcta. Día 5: Sin novedades

Week 11 7th week of flower. Light settings 12/12 on at 9.00am off 9.00pm Light power= 75% 184w Radiator settings LIghts on Turn on if temp drops below 22.5c Turn off if temp goes above 22.5c Lights off Turn on if temp drops below 18.5c Turn off if temp goes above 18.5c Extractor settings temperature 23c with 1c steps Humidity 50% with 0% steps Max speed 10 Min speed 4 VPD aim 1.0-1.4 DLI aim 35 Wednesday 5/4/23 Day 71 (Day 43 flower) Away Thursday 6/4/23 Day 72 (Day 44 flower) Away Autofeed 4 15 minute runs Normal pump 4 drops ph d Water Est. 24L Ec=0.22 Ph=6.3 Est. 18L left Roughly 2L each. Friday 7/4/23 Day 73 (Day 45 flower) Back home 3.30pm Movement fan has broke while away. 15L left Ec=0.225 Ph=6.7/6.7 Used15L over the week. Plants didn't like being on just water for a week. Needed PK #2 Height= 51CM Dist= 43CM DLI=27.3 Big defoliation. Lifted light and moved it. #2 Height= 51CM Dist= 49CM DLI=21.9 Saturday 8/4/23 Day 74 (Day 46 flower) Autofeed 5 runs (total 70 mins) Normal pump Different Feed times 4 drops ph d Nutes 15L Ec=1.37 Ph=6.3 8L left Roughly 2.3L each. #2 run 0.15L Ec=3.05 Ph=6.1 Radiator settings LIghts on Turn on if temp drops below 21.5c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 18.0c Turn off if temp goes above 18.0c Extractor settings temperature 23c with 1c steps Humidity 45% with 0% steps Max speed 10 Min speed 4 Been a hot day. Sunday 9/4/23 Day 75 (Day 47 flower) Nothing Monday 10/4/23 Day 76 (Day 48 flower) Nothing Tuesday 11/4/23 Day 77 (Day 49 flower) Autofeed 6 runs (2,3,5,15,15,15 total 55 mins) Normal pump Different Feed times 4 drops ph d Nutes 8L Ec=1.32 Ph=6.3 8L left Roughly 1.6L each. #2 Height= 51CM Dist= 49CM DLI=19.2 Light power= 100% 240w #2 Height= 51CM Dist= 49CM DLI=24.1 I was away for most of the week so the grow was on autopilot. I decided to have them just being watered rather then having any nutes this week. Some plants suffered a little but I got on top of it when I got home. #2 Tropicana Cookies FF has also done OK but could have done with some nutes during the week. Power used for week Light (2.21+2.22+2.21+2.21+2.22+2.21+2.25)=15.53Kw Extractor (0.55+0.57+0.55+0.54+0.58+0.58+0.58)=3.95Kw Fans (0.98+0.99+0.94+0.94+0.95+0.89+0.87)=6.56Kw Dehumidifier (++++++)=Kw Radiator (2.22+2.19+2.46+1.75+1.38+1.1+1.69)=12.79Kw Water pump. (0+0.01+0+0.01+0+0+0.01)=0.03Kw Total for the week=38.86Kw Back in a week. Thanks for stopping by

Zurzeit ist viel Regen🌧️⛈️🌥️ in Deutschland, Herbst🍂 halt und die Temperatur fällt. Aber sie wachsen, zwar langsamer aber sie Wachsen. Ich denke 2 1/2 Wochen dann ist ende⚔️🔚

*Will be topping them to find out Sex in straight 12/12 cloner hopefully we get more females than males. * Will update journal later *Ignore everything untill tomorrow *So I cut them and put them straight into 12/12 the clones that is to show me Sex. *You could see the hollow hole in the stem I wonder if that’s gonna cause an issue.

Hi people, how are you all???? Week 7 here, and all is good with the plant, I did some defoliation to keep the airflow, and I got a ScrOG to open the plant a little bit to get more light. I am very happy with the results until this stage, is a whole new world for me :-) Thank you for following me. Peace and love! :-)

This was a good grow couple of ups and downs weather wise and the moment of devastation when seeing my fattest cola had been affected by bud rot this was a solid happy nug yesterday and today well thenpics tell a tale all other buds were fine and are drying as we speak ye win some ye lose some some are just fkin annoying

Só mais um pouquinho e tá na hora da colheita, a planta tá grande com belos botões e um aroma forte cítrico.

Plantas sanitas y fuertes.

So beautiful , they need one more week 😜💚💎🙏

🗓️ Week 12 – Flower Week 8 ✅ (Late Flower) 🔹 General The plants have now entered deep late flower. Buds are gaining more density and resin, and the aroma is intensifying day by day. For Cherry MAC Muffin, fruity-sweet notes are becoming dominant 🍒✨ 🔹 Feeding After a longer phase of reduced EC, feeding has been increased again. Input: 1.65–2.0 EC / pH 6.3 Runoff has built up to ~3.0 EC, but remains stable – no signs of overfeeding or stress. No flushing yet – the final flush with Flawless Finish is planned in about a week 💧 🔹 Observations – Cherry MAC Muffin 🍒 Development: Densest buds in the tent, very sticky and frosty 📏 Runoff EC: 3.0 ✅ Status: No stress symptoms despite the high EC – watering frequency slightly reduced to maintain balance

finally the scorching sun came having moved the plants from under the canopy outdoors a downpour created a bit of mold in a small part of the skywalker and also to the little cherry i later removed it and sprayed the plants with garlic infused water now i'm the bomb i'm fertilizing with long awaited organic vermicompost, the plants are perfect, i think i will delay the harvest for the cherry to make it gain a little more weight at the expense of the flavors the flavors are amazing absurd...i ordered some clones by freakshow humbolt seeds I also made new transfers with old seeds tried to germinate and they went splendidly.honey cream and special queen by royal queen seeds

En este caso es un diario un poco distinto... Tengo en mi terraza (outdoor) una maceta de unos 25 litros, con sustrato reciclado de todos los ciclos hechos con BIOTABS este invierno pasado Durante todo el invierno / primavera, he ido añadiendo a esta maceta los "restos" de estas macetas del indoor, cargados de vida, sustratos y materia orgánica Cada vez que añadía sustrato reciclado, añadía / renovaba la capa de mulch (heno) para proteger la micro-vida Además, ha estado protegido por un techo de metacrilato todo el invierno, para evitar que las lluvias torrenciales de mi zona se llevasen los nutrientes He mantenido este sustrato húmedo con Agua RO A principios de mayo, planté una tomatera (tomate canario) en esta maceta Alrededor del 26 de mayo, decidí dejar caer aleatoriamente una semilla de Gorilla Z Auto que me regaló mi amigo StackFarms Unos días después, nacía con fuerza y vigor una pequeña plántula! 😍💥 Esta maceta se mantiene hidratada con un sistema de riego por goteo (TEMU) muy ingenioso: Utiliza un gotero medico como se usan en los hospitales! Este sistema ha demostrado (en mis pruebas) ser bastante consistente en el riego diario! La maceta con la tomatera + Gorilla Z Auto se mantiene hidratada con 1 Litro de H2O diario (RO o agua declorada, depende como me pille) A divertirse con este experimento! 🚀 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered

Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.

Plant two is doing a little better color wise. Something is going on with the leaves of plant one mostly. Maybe it is because i was using overflow water straight from the air conditioning unit instead of the tap? I'm having to pull a lot of dead leaves off

Nähere Informationen und Bilder folgen im Laufe des Prozesses. Die Ladys hängen jetzt zum Trocknen.

Looking okay, the highest leaves are burning quite a lot, but I’m not worried a lot as the buds are forming nicely. I’ll be feeding a little less from now on as she doesn’t seem to need a full dose every watering.

im not sure how many days the light went out after i go on vacation. T T this week . stop nutrients use water ph5.8-6.2

Girls are doing great

Can't believe we're at the start week 5 already. This is such a beautiful process. Things are looking good - I started defoliation on all the ants this week. I figure, the little one isn't getting much bigger, the big one is so bushy the light is having trouble getting thru even with LST, and the bag seed seems to be a photoperiod plant so I have all the veg time I need to recover on that one. Update: The bigger girl started flowering on day 32! Let me know what y'all think!