All in all i am more than happy with the outcome and the life of these girls. Plus did you see i got 11gram of crystals by using the trim tray! Deffo worth it

think to add co2 !!!!!!!

*🌸 Flip / Day 1 of 12/12: Sept 12, 2026 * 📅 Today: Oct 3, 2026 * 🔢 Day 22 from flip — Week 4, Day 1 * 🌱 Week 1: Sept 12–18 * 🌱 Week 2: Sept 19–25 * 🌱 Week 3: Sept 26–Oct 2 * 🌸 Week 4 starts: Oct 3 📌📌 * CP #1: bushier/taller; I did the major strip/defoliation at Day 21 (Oct 2). * CP #2: smaller, but developing visible bud sites. * 1× Purple Afghan * Smaller/leafier and developing more slowly; still showing mostly pistils compared with the CPs.

Day 100 | 03/04/2022:💧 I am back from my holiday today but I will only be able to harvest them at the end of the week, so I watered them today. but with a reduced 1L each because I still want them to be more on the dry side when I am taking them off Day 105 | 08/04/2022: Today was harvest day and the girls look sooooo dry and yellow omg.. 😅 Maybe that 1L was not enough, but still it's better that they are on the dry side. They just all went so yellow in the last few weeks, obviously they werent getting any nutrients but also I harvested them a bit late

📆 Semana 7 Los cogollos alcanzan su máximo volumen y comienzan a endurecerse de forma evidente. La mayoría de los cálices terminan de engordar, la producción de resina es muy abundante y el aroma se vuelve intenso y penetrante. La aparición de nuevos pistilos disminuye, mientras una parte de los existentes empieza a oscurecerse y replegarse. Bloom Booster entra en su última fase de aplicación, ayudando a completar el engorde y la maduración de las flores. La planta sigue demandando agua y nutrientes, aunque es recomendable mantener una EC estable y evitar aumentos para favorecer una maduración equilibrada. ⚡ EC: 1.8 💧 pH: 6.2 – 6.5 🌡️ Agua: 21°C 🌫️ Humedad: 45–50% 💡 Intensidad: 1000–1100 PPFD 🔥 Nota de cultivo: En esta etapa la prioridad es mantener un ambiente seco y una buena circulación de aire para favorecer el endurecimiento de los cogollos, potenciar la producción de resina y minimizar el riesgo de botritis. ¡Seguimos creciendo fuerte! 💪

If you you have some advvice 27/11 wait for biobizz bio veg

Increased nutrients to 11ml/gal each. Trichomes still mostly clear. Several weeks of flower left yet.

We are starting the cultivation of a new, fast-growing strain Creamy Beast Turbo Feminized from Seeds Mafia. The seed was germinated in a paper towel and sprouted within 24 hours. Afterward, we carefully planted it in a 1.6-liter pot filled with a specially prepared soil mix: 50% soil, 10% perlite, and 35% coco substrate. The daytime temperature is 28°C, nighttime temperature is 21°C, and the humidity is maintained at 65%. The light schedule is set to 18/8. A big thank you to Seeds Mafia for providing the seeds, we're excited to see how it develops!

Experiment failed; unable to control the staked arms. Allowing them to become main stems. Expecting a dozen colas. Yellowsticky traps capture hundreds of thrips. She is just beginning to become a girrrrl.

The hairs are really showing right now and a slight fruity perfume is filling the grow closet. The bright colors glisten and captivate and I just stare and stare. In between dunk feeds I do regularly top pours. The plants are still short. Not much of an early flower growth spurt. But the bud sites are looking healthy and sticky already so I expecting some top shelf, even if it’s not much of it 🤣

i am deffo running her again. Currently drying. I know this strain will slap crazy. The frost on her was insane.

So it’s the end of Week 5, Day 35 for the Sweet Seeds Gorilla Girl XL auto flowering grow. I have come to the conclusion that these four plants are not going to be XL after their pre-flower stretch. Overall the plants are healthy but the prolonged low humidity and temperatures have robbed them of the vigorous growth documented in my previous Sweet Seeds diary (Cream Mandarine XL Autos). I am disappointed that this will most likely be an XS harvest but a tiny quantity of quality bud is better than nothing. I gave them their first feeding of GHE FloraNova Grow fertilizer at a rate of 1.25 ml/gallon and this is 1/4 of a full dose that would be given to a photosensitive strain. I am still watering every fourth day at a rate of 2.8 litres per plant or 0.7 of a litre per plant per day. I will only be using the fertilizer every other watering or every eight days. That’s about it for this update and on to… Mom’s Tip for Week #5- To Tuck or Take? The when, where, why and how to defoliate Autoflowers successfully…. Lets start with some basic Biology- Photosynthesis is the process by which green plants take in sunlight, water and Carbon Dioxide and transform it into energy in the form of sugars that feed the plant and make it grow. So essentially, every fan leaf on your plant is a solar panel collecting light and therefore valuable in it’s own right. I always try to tuck my leaves if possible before considering removal as my plants need all the energy they can get to power through until harvest. But sometimes tucking isn’t enough or just isn’t an option anymore so here are my suggestions for taking the fan leaves from your Cannabis plants if needed. When- defoliating Autos can be done anytime throughout the grow although it’s generally not done within the first 3-4 weeks. The plants are usually quite small and those early weeks are valuable growing time that these plants simply can’t afford to miss. This is when I find leaf tucking to be most valuable, allowing the plants to keep what few solar panels they have while also allowing the grower to position the leaves so that they are out of the way. I personally find that I defoliate my plants the most over the final 3-4 weeks of the grow as foliage is dying off on it’s own by that point and a few less leaves at harvest time is always a good thing! Of course anytime you see dead/dying or diseased foliage, it should be removed as needed throughout the grow. Where- defoliating Autos is a delicate balance due to their small size and short lifespan. If my plants are healthy, thriving and tucking is no longer an option, I will only remove fan leaves if they are covering/blocking new growth or potential bud sites. As the plants age and the foliage begins to die off naturally, I tend to remove the oldest, lowest growth first working my way up the plant as needed until harvest. Why- defoliating Autos is done for a few basic reasons but only as an extreme in my garden when all else fails. Removing certain large leaves will allow more light into the lower portion of the plant’s canopy reaching young branches or potential bud sites. As the plants age, it also helps with increasing airflow around your swelling buds thus reducing your risks for mold and fungi in humid grow environments. Removing any and all dead/dying or diseased foliage is absolutely necessary in keeping your plants healthy and the grow room clean and pest free. How- defoliating Autos is simple if you keep it simple. Only remove what you absolutely have to and use a sterilized set of sharp pruners for a clean, controlled cut. As the plants age and the foliage begins to die off naturally, just wait. What doesn’t fall off on it’s own will snap off with a simple twist of the leaf’s stem. If the leaves don’t come off with ease, they’re just not quite ready yet so be patient. Be mindful that removing the solar panels from your Cannabis plants is always risky business but Autoflowers are even more challenging in their own way. Smaller plants with a lower leaf to bud ratio and a short lifespan means less room for error so paying close attention to the when, where, why and how is crucial for successfully defoliating Autoflowers. Tuck if you can, only take what you absolutely have to and of course- never take more than 25% of your plant’s overall foliage at one time as this can be devastating or deadly to even the healthiest of plants. Allow your plants to take the lead and they will show you which leaves are ready to go- at what time, all on their own just as nature intended.

1.10.25 Day 66 Day 18 since 12/12 Fresh reservoir change out. Added 10 liters. I want to see how long it will last. I also increased light intensity.

Eccoci qui... Che splendore questa genetica, NON SEBRA MARIJUANA!!! - Strain 1: Ha una conformazione più simile alle normali piante ma ha le prendi sole e tutte le foglie della pianta con le mini foglie che si sovrappongono e sta iniziando a formare le cime come GIOIELLI davvero mi piace molto, tralasciando il fatto che è PIENA di RESINA!!!!! - Strain 2: Lei ha una conformazione molto strana purtroppo avendo avanti a lei nel box la Alladdin Kush ha allargato il ramo a destra allungando e modificando la forma che aveva, lei è molto imboscabile ovunque inquanto NON sembra marijuana. Nella fioritura è più indietro rispetto Strain 1 ma non importa la resa essendo così particolare vince in partenza!!!! Questa settimana inizieremo con i nutrienti che finora NON sono stati utilizzati... Grazie a @Khalifa_Genetics per la collab e a tutti per il supporto🔥🌲❤️