The Grow Awards 2026 🏆
Likes
Comments
Share
ACTUALIZACIONES A DIARIO!! Miles de gracias al equipo de Royal Queen Seeds y a @James por proponerme esta aventura tan trepidante y poder conocer de cerca las nuevas F1 y sobre todo a la gran Titan F1. Espero que lo disfruteis y os sirva como referencia. ¿Qué piensas cuando lees la palabra “Titán”? Hay quienes la asocian con los hijos de Urano de la mitología griega. Otros saben que Titán es la luna más grande de Saturno. ¿Y entre los cultivadores de hierba? Estas personas reconocen a la Titan F1 como una variedad de marihuana con una genética de vanguardia. Se trata de uno de los primeros híbridos F1 autoflorecientes, y es una variedad pionera que ofrece productividad, resistencia y algo completamente nuevo. La Titan F1 deleitará tu olfato durante la fase de floración y más allá. Esta variedad autofloreciente ofrece un potente perfil de terpenos compuesto principalmente por mirceno, farneseno, ocimeno, pineno, bisabolol y limoneno. Gracias a MarsHydro 😊🙏 por darme la mejor luz que hay en el mercado. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. 🌻🚀 Consigue tus semillas aqui: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/624-titan-f1.html 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ Quinta semana de floracion, las planta ha terminado de estirar, las ramas laterales han estirando junto con la cola central y se muestran los futuros cogollos, es una planta muy compacta y he tenido que quitar alguna hoja baja para evitar la aparicion de algun hongo. Se muestra el principio de una gran cola principal. Es la genetica que mejor ha respondido, por no decir la mejor. Felicidades Royal Queen Seeds y MarsHydro 😁. Los cogollos han estirado muy rápido y se ha formado una larga cola principal con muchos cogollos en las ramas laterales, comienza a cargarse de resina. 📆 Día 49: Riego con nutrientes EC 1050, comienza el engorde de los cogollos. 📆 Día 50: Riego con nutrientes EC 1050 📆 Día 51: Riego con nutrientes EC 1050, esta llena de resina 📆 Día 52: Riego con nutrientes EC 1050 📆 Día 53: Riego con nutrientes EC 1050 📆 Día 54: Riego con nutrientes EC 1050 📆 Día 55: Riego con nutrientes EC 1050
Likes
9
Share
@OS_Farmz
Follow
Everything goes good. Cutting big leaves. If someone of exeriensed growers knows how to make them feel even more better let me know plz;) Peace🤙🏻
Likes
10
Share
El famosísimo video para que os enseñé que no está la cosa para bromas. 420 siempre...Green Greets!!
Likes
6
Share
Was showing signs of nutrient lockout so decided to start flushing process.. amazing smell but this will be the last ever diary of disco biscuits as she has outstayed her welcome. Not as fat as I’d like her to be but still 2 weeks remaining before chop.
Likes
12
Share
@r00tz0ne
Follow
11/02 - Pre-harvest 109g of wet bud (tare weight of plate 358g). Letting the rest go for some more days. Light lowered to 28cm. 16/02 - Plant fully harvested. Total 209 g wet with all the stem you see on the last pic. Hang drying in 20-21°C, 55-60% humidity. Strong hay smell of the pre-harvest buds, not yet ready. Will update final dried weight later to see the results. 19/02 - After 8 days of drying, the pre-harvested buds have been trimmed & moved to curing stage in jar. 24g dry out of that batch (was 109g wet). Monitoring humidity in the jar to keep around 62%. Still leaving the second harvest to hang and dry 2 more days. 21/02 - Total dried result: 24g nice top buds 13g second grade buds from second harvest 12g loose popcorn buds for edibles Total 49 g / 57 watts 0.86 g/watt ratio. Not too bad, but can and will be improved next run. Lessons learnt: 1. Definitely will build some activated carbon filter to decrease smell. 2. More lollipopping / defoliation on lower parts at start of flower to decrease loose popcorn. 3. More balanced nutes in pre/mid flower to avoid extensive yellowing. 4. Adding bone meal to soil from start to let it degrade fully. 5. Applying 4 times of bottom feed to avoid drying out the bottom of pot. 6. Never let lights closer than 27cm. 7. Maybe try 20/4 schedule. 8. Might let it go beyond week 16 to let trychomes start to amber. Luckily the hay smell is totally gone during the cure. Very happy with the results. Thx for the support & interest! Good luck to all! See ya at the next run!
Likes
Comments
Share
Hola a todos! Espero que anden bien!!.. Les comento que hice esta semana, la he regado con agua un riego y el último hoy, con nutrientes en sus dosis indicadas más arriba. La planta ha crecido mucho esta semana 37cm en 7 días, ha pegado el estirón, y también han mostrado sus preflores. Esta semana he tenido una humedad alta 70% y no la he podido bajar,pero con humedad y una temperatura que ha rozado los 28 grados por momentos, he notado que las plantas les gusta ese ambiente, por eso el crecimiento que ha pegado. Hoy (17/09 ) ,dia 35, de la Auto Divine Rapier he quitado las hojas más grandes que tapaban las ramas bajas, espero que en este momento no estrese la planta. Bueno, no los aburro más, nos vemos la próxima semana!. Buenos humos!! Las imágenes corresponden al periodo del 10/09 hasta el 17/09 (dia 35) inclusive.
Likes
9
Share
Two low branch broke off due to wind and stem wasnt stong enough for weight of the buds....other than that just a handful or two of defoliation every two day or so....makes trimming ez lol
Likes
1
Share
@PalmaGrow
Follow
19 - 25 noviembre Se realiza amarre en brazos más altos poda de bajos y hojas al igual dóblanos estás dos ranas para generar estrés y emparejar con las demás
Likes
Comments
Share
@BBZETTA
Follow
The bloom hast started feeding Go switched now im waiting for the Budsites to multiply!
Likes
20
Share
Update- Fri 14th May Week has been ok but I've not been there as much so it'll be nice to see them today. It looked gorgeous last time there are so many bud sticks popping up from the curly FAT main lines . UPDATE - TUESDAY 18th May All has been going well as you can see from the photos. The only problem is that I have two TOTALLY different Spectrum lights in there so I have to keep switching them over to even the plant out! I’m trying to come up with a better solution but I don’t know if I will be able to afford my cabling, adaptors and all the little bits I need to build my 10 light COB.
Likes
17
Share
I harvested early because I noticed a few seeds starting. I'm assuming that's why my buds are small.
Likes
42
Share
DID YOU SEE LIKE THAT FUCKING SHIT FLY? WE HAVE SKIN LEFT NEAR THOSE TRCHOMES ....FUCK YOU BITCH
Likes
307
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls look great, turning purple 💜, Stopped water only, and giv nutes. 💪 Finaly did a big defoliation, removed lot of leaves, but still looking don't enough 😅 💧 Give water each 2/3 day 2 l Water + Bloom + Green Sensation + Sugar Royal (3 + 1 + 1 ml/l) 2 l Water + Bloom + Green Sensation + Sugar Royal (3.5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 28 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Processing
Likes
23
Share
Another week down few more to go can't wait!! First ever attempt of growing my own so really impatient to see the final results now and get to the finish line, that said all has went well upto now other than the size they reached haha, really started putting on weight now it seems and they smell lovely, excited to see the buds fatten and progress over these last few weeks up until harvest now, started 5 liberty haze also they are just coming upto 3 weeks now so check that diary out to, any comments info tips for the final stages appreciated
Likes
28
Share
This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!
Likes
107
Share
💩Holy Crap Growmies We Are Back💩 Code Name FBT2309 Well growmies we are at 21 days in and everything is going great 👌 👉 So the low stress training👈 has been going great she's gonna be a big girl, shes in the Pre-flower Stretch 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
12
Share
@TappedN
Follow
Girls looking real good so i decided to continue to lst and water them with ah regular feeding switch to flower some time later in the week once I see the branches have risen
Likes
27
Share
Started the week with a plastic dome to help with humidity, and after six days the dome was not needed anymore. The seedling outgrew the dome. I keep the watering very light during the seedling stage to make sure there isn’t any overwatering. I take my photos about 24 hours apart
Processing
Likes
22
Share
🔥🔥🔥I think the stretch is over. Did some slight defol nothin major. Widow and dream have grown most in this last week but are still smaller then the rest. Smell picked up too. Can't wait to seed how the buds develope. Wish I had the 2nd trellis up and trimmed em all harder to prepare for the reduced mobility of the trellis...only my 2nd indoor grow so I'm still learning any advice is greatly appreciated😀 I'm bored so I'm a day early with the update. 2nd grow with the mango 1st indoor with the headband and 1st experience either way with the rest. Plant Count Mango- 8 Blueberry Headband- 7 skywalker- 1 Bruce - 1 Widow- 1 critical purp- 1 enemy dream- 1
Likes
2
Share
Putting on weight fast now in peak flower. Love the structure of the plant and really regretting not taking a cutting. Oh well, ce la vie. Will stop adding PK in the next few days before cutting back on nutrients next week then flushing for the last 2 weeks. This plant is at the back of the timelapse.