21/07: Weiterhin entwickelt sich die Papaya Punch prächtig. Sie lässt sich super trainieren und kommt mit der letzten Düngerportion super zurecht. Weiterhin warte ich, dass ihre Zeltpartnerin endlich bereit ist in die Blüte geschickt zu werden.

Now shes a single Lady in her tent. Second Topping at 2 branches and slight defoliation mid week which you cannot really see anymore. She is actually looking really beautiful. :) Light hits with around 450-500 PPFD. Watering every 2-3 days.

Is she almost ready?

🍼Greenhouse Feeding BioGrow, Bio Enhancer & BioBloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱GANJA FARMERS

Day 14 of flowering, day 51 total.. Set to get some sunshin

So my beautiful babies have had a busy week they had a trim got rid of the big fan leaves covering new bud sites and today they had monkey nutrients bloom A and Bloom B plus stress, rootshoot and calmag and they had there first day of 12 hours light and 12 hours dark I added another fan so they are loving life and the humidity is finally lower The smell is amazing inside the tent and the filter is keeping the smell inside the tent thankfully

-fast Diarie Finish up sorry ( allready Harvested )- [Be Back soon !]

everything is coming along just fine with the ladies they are very dense and sticky

Vamos familia, actualizamos la primera semana de floración de estas NoName de Seedstockers. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. Esta semana cambiamos a 12 horas luz,12 horas de oscuridad, estiraron bien y ensancharon bastante también, el color es verde sano. Se nota que los nutrientes de la marca Agrobeta hacen sus funciones. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

OG KUSH - Bag seed from a grateful dead show (Chem Dawg) 04 - 07 May 2023 - Germination Week 08 - 14 May 2023 - Veg week 1 15 - 21 May 2023 - Veg week 2 22 - 28 May 2023 - Veg week 3 29 - 04 June 2023 - Veg week 4 05 - 11 June 2023 - Veg week 5 12 - 18 June 2023 - Veg week 6 - Final Veg

Same thing. Stationary pictures until video upload gets patched

Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼 MadeInGermany

We're rolling into week 22, the 9th week of flower for these wonderful girls. Possibly the last week they'll have, at least the last week UKBS 1 may have. They've both shown great progress in terms of growth in the past week in my opinion, and the trichomes are beginning to present as cloudy with a smattering of amber. I like my CBN, so I prefer to let them amber slightly more than most. Rest assured I'll be keeping a close eye on trichome color in this next week or two. Timelapse is out for the week. Updates come as the week progresses, as usual. EOS T5 shots are out. -7/4/2021 - A cola on Carl 1 was too heavy for it's own good, and snapped. I decided to remove and dry it as I really don't see a point in trying to re-attach it at this point in flower. -7/6/2021 - Another cola snapped on Carl 1. Unfortunate, I was hoping she'd fatten up further first. Ah well.

Feeding time! She was starting to show signs of hunger but wanted to time the last feed appropriately. Couldn’t be happier with her development none the less. HLG’s Elite 360 and Gaia Green are just killing the game! Cheers 🍻

Heloooh So this sour tangie is starting to grow realy nicely, it seems that it recoverd good from their transplantation. it's got small branches popping up everywhere . witch will be nice when i start putting them under my hid that's arriving soon. I gave it some alga grow and not seeing burning on the leave's so will probably continue this. Happy with my grow so far let's hope these plants grow big in flowering, they got a nice base so far. Greetings Bawzs

I started the GSC seeds from HSC by soaking in a glass of water overnight then planted in coco coir under a humidity dome in my veg tent. I will plant them in flower box in a couple weeks when they can handle the feed that my BB clone is on right now. On day 5 my 2 other Gsc seeds rotted perhaps too wet but I have one good remaining for this run. I started White widow seeds and will run 2 phenos. Gsc is looking good so far.

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.