The Grow Awards 2026 🏆
Likes
Comments
Share
Harvest day 67 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 16-18 degrees and 55-59% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. . The smell is great I'm curious about the taste 💚 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
11
Share
@Mo_Powers
Follow
it grows and grows and grows. it looks very healthy and strong. the changeable weather doesn't bother it at all. unfortunately, there are still no clear indications of its sex. it gets a nice nutrient mix from biobizz root and grow.
Processing
Likes
66
Share
What a week, So I did a run off test end of last week and they was really high, but I would like to address the DNA Mills cork as I am using this in just one pot (A) to try it out I used 3/4 (B) to my normal coco in another pot 50:50 (C) in another at a 1/4 (D) then when just my normal coco mix ( E) and I havent seen much difference other then the retention of water... UNTILL NOW. So evaluating all my reading I have from run off this is how it WAS sitting running water with an EC 0.7 Ms/cm A - 2.4 Ms/cm B - 2.3 Ms/cm C - 2.0 Ms/cm D - 1.9 Ms/cm E - 1.5 Ms/cm So my conclusion is that I dont like the cork maybe I'm using it wrong somehow I dont know but in my experience, it seems to be grabbing hold of all the salts and not letting go, so this week I ran litres and litres of water through them to bring them down I can only get A down to 1.4 Ms/cm and am struggling to get it any further down does anyone have any suggestions. As for the deficiency I was supposed to I produce the PK booster beginning of this week and couldn't with the run off being so high, well that's what I'm hoping anyways 😂. Plant A doesn't seem to be swelling like the rest (front left in pictures) I'm hoping this is down to genetics if anyone else has any thought I'd love to hear them. Thanks for dropping in and reading, Happy Growing! 👊👍
Likes
11
Share
@Chubbs
Follow
420 Fastbuds Week 2 Veg FBT2304 The two of these are starting off great. The few rust spots stopped and stayed on the couple leafs it showed up on. I feed 500ml of solution every other day. I did start the General Hydroponics 3 part Flora series as well as the Calimagic. On week one I started 1/4tsp per gal ratio every other feed, so far no burn so will probably bump it up this coming week and see how they respond. All in all Happy Growing.
Likes
2
Share
@Mr_Terps
Follow
Was ein Zufall Deadcheese + El Xupet =
Likes
24
Share
@Bawzs
Follow
A nice Harvest From a nice plant , she had some nutrients problems but she din't care . Gave me a nice 40 Grams yield I'm just realy satisfied nice's looking and smelling plant i ever had!
Likes
52
Share
Once again she passes my expectations, late to the show with trichome production. I'm surprised there is purple on the bud, maybe Purpinator does work. I thought I could see hints under the grow lights and thought my eyes were deceiving me, I was just being hopeful. But nah 2 of the 3(under the UV) have developed a beautiful tone of purple. I was never going to bother with a deep freeze but maybe the whole bud will change given conditions, that would be something, fingers crossed. 🤔 was a little skeptical that reducing temps humidity would change density, but it does, buds are solid something I've not been able to achieve before. Rule of thumb is never to surpass 60% RH in the flowering phase and try to progressively reduce it down to 40% in the last 2–3 weeks before harvest. The plant will react as it seeks to protect its flowers, responding by producing denser buds and a higher concentration of resin. Cannabis plants are sensitive to sudden temperature changes, especially in the flowering stage. Extreme heat or cold can impact bud density and overall yields. In nature as a defense mechanism from cold, the plant sensing sudden dips in temperature will attempt to remove the pockets of air within the bud, it achieves this by compacting itself in doing so to better protect itself from cold snaps which are normally indicators in nature that worse weather is on the way. Terpene levels are the highest just before the sun comes out. Ideally, you want as many terpenes present in your plants as possible when you harvest. Cannabis plants soak up the sun during the day and produce resin and other goodies at night. The plant is at its emptiest from "harvest undesirables" so to speak right before the lights on. Boiling cannabis roots during harvesting slows down the drying process. When you boil cannabis roots, it shocks the plant, closing the stomata on the leaves. This prevents massive moisture loss through the leaves, leaving only the floral clusters actively losing moisture at a reduced pace. I've always run a strict 60/60 and it took almost twice as long to dry to a snap than previous grows where I didn't boil for what it's worth. Chlorophyll is good for the plant but not for you. When you harvest the buds, even after you flush them, if you flush them, they’re still filled with chlorophyll. Freshly cut buds are greener than dried buds because they still contain loads of chlorophyll. However, when rushed through the drying process, the buds dry but retain some chlorophyll, and when you smoke it, you will taste it. Chlorophyll-filled buds are smokable, but they aren’t clean. Slow drying gives the buds enough time and favorable conditions to lose the chlorophyll and sugars, giving you a smoother smoke. How the plant disposes of the chlorophyll and sugars by a process of chemically breaking them down and attaching the decomposed matter once small enough to water molecules which then evaporate back into the ether. Time must be given to the process to break down the chlorophyll and sugars. Think of it like optimizing the environment for decay. All the nutrients it could ever need are in abundance, it eats nutrients based on its demand for growth, which is dictated primarily by available light. Plant growth and geographic distribution (where the plant can grow) are greatly affected by the environment. If any environmental factor is less than ideal, it limits a plant's growth and/or distribution. For example, only plants adapted to limited amounts of water can live in deserts. Either directly or indirectly, most plant problems are caused by environmental stress. In some cases, poor environmental conditions (e.g., too little water) damage a plant directly. In other cases, environmental stress weakens a plant and makes it more susceptible to disease or insect attack. Environmental factors that affect plant growth include light, temperature, water, humidity, and nutrition. It's important to understand how these factors affect plant growth and development. With a basic understanding of these factors, you may be able to manipulate plants to meet your needs, whether for increased leaf, flower, or fruit production. By recognizing the roles of these factors, you'll also be better able to diagnose plant problems caused by environmental stress. Water and humidity *Most growing plants contain about 90 percent water. Water plays many roles in plants. It is:* A primary component in photosynthesis and respiration Responsible for turgor pressure in cells (Like the air in an inflated balloon, water is responsible for the fullness and firmness of plant tissue. Turgor is needed to maintain cell shape and ensure cell growth.) A solvent for minerals and carbohydrates moving through the plant Responsible for cooling leaves as it evaporates from leaf tissue during transpiration A regulator of stomatal opening and closing, thus controlling transpiration and, to some degree, photosynthesis The source of pressure to move roots through the soil The medium in which most biochemical reactions take place Relative humidity is the ratio of water vapor in the air to the amount of water the air could hold at the current temperature and pressure. Warm air can hold more water vapor than cold air. Relative humidity (RH) is expressed by the following equation: RH = water in air ÷ water air could hold (at constant temperature and pressure) The relative humidity is given as a percent. For example, if a pound of air at 75°F could hold 4 grams of water vapor, and there are only 3 grams of water in the air, then the relative humidity (RH) is: 3 ÷ 4 = 0.75 = 75% Water vapor moves from an area of high relative humidity to one of low relative humidity. The greater the difference in humidity, the faster water moves. This factor is important because the rate of water movement directly affects a plant's transpiration rate. The relative humidity in the air spaces between leaf cells approaches 100 percent. When a stoma opens, water vapor inside the leaf rushes out into the surrounding air (Figure 2), and a bubble of high humidity forms around the stoma. By saturating this small area of air, the bubble reduces the difference in relative humidity between the air spaces within the leaf and the air adjacent to the leaf. As a result, transpiration slows down. If the wind blows the humidity bubble away, however, transpiration increases. Thus, transpiration usually is at its peak on hot, dry, windy days. On the other hand, transpiration generally is quite slow when temperatures are cool, humidity is high, and there is no wind. Hot, dry conditions generally occur during the summer, which partially explains why plants wilt quickly in the summer. If a constant supply of water is not available to be absorbed by the roots and moved to the leaves, turgor pressure is lost and leaves go limp. Plant Nutrition Plant nutrition often is confused with fertilization. Plant nutrition refers to a plant's need for and use of basic chemical elements. Fertilization is the term used when these materials are added to the environment around a plant. A lot must happen before a chemical element in a fertilizer can be used by a plant. Plants need 17 elements for normal growth. Three of them--carbon, hydrogen, and oxygen--are found in air and water. The rest are found in the soil. Six soil elements are called macronutrients because they are used in relatively large amounts by plants. They are nitrogen, potassium, magnesium, calcium, phosphorus, and sulfur. Eight other soil elements are used in much smaller amounts and are called micronutrients or trace elements. They are iron, zinc, molybdenum, manganese, boron, copper, cobalt, and chlorine. They make up less than 1% of total but are none the less vital. Most of the nutrients a plant needs are dissolved in water and then absorbed by its roots. In fact, 98 percent are absorbed from the soil-water solution, and only about 2 percent are actually extracted from soil particles. Fertilizers Fertilizers are materials containing plant nutrients that are added to the environment around a plant. Generally, they are added to the water or soil, but some can be sprayed on leaves. This method is called foliar fertilization. It should be done carefully with a dilute solution because a high fertilizer concentration can injure leaf cells. The nutrient, however, does need to pass through the thin layer of wax (cutin) on the leaf surface. It is to be noted applying a immobile nutrient via foliar application it will remain immobile within the leaf it was absorbed through. Fertilizers are not plant food! Plants produce their own food from water, carbon dioxide, and solar energy through photosynthesis. This food (sugars and carbohydrates) is combined with plant nutrients to produce proteins, enzymes, vitamins, and other elements essential to growth. Nutrient absorption Anything that reduces or stops sugar production in leaves can lower nutrient absorption. Thus, if a plant is under stress because of low light or extreme temperatures, nutrient deficiency may develop. A plant's developmental stage or rate of growth also may affect the amount of nutrients absorbed. Many plants have a rest (dormant) period during part of the year. During this time, few nutrients are absorbed. Plants also may absorb different nutrients as flower buds begin to develop than they do during periods of rapid vegetative growth. 432 Hz is said to be mathematically consistent with the patterns of the universe. Studies reveal that 432 Hz tuning vibrates with the universe’s golden mean PHI and unifies the properties of light, time, space, matter, gravity and magnetism with biology, the DNA code and consciousness. When our atoms and DNA start to resonate in harmony with the spiraling pattern of nature, our sense of connection to nature is said to be magnified. Another interesting factor to consider is that the A=432 Hz tuning correlates with the color spectrum while the A=440 Hz is off. Audiophiles have also stated that A = 432 Hz music seems to be non-local and can fill an entire room, whereas A=440 Hz can be perceived as directional or linear in sound propagation. Once you adopt the idea that sound (or vibration in general) can have an equalizing and harmonizing effect (as well as a disturbing effect), the science of harmony can be applied to bring greater harmony into ones life or a tune to specific energies. There is a form of absolute and of relative harmony. Absolute harmony can for example be determined by the tuning of an instrument. The ancients tuned their instruments at an A of 432 Hz instead of 440 Hz - and for a good reason. There are plenty of music examples on the internet that you can listen to in order to establish the difference for yourself. Attuning the instrument to 432 Hz results in a more relaxing sound, while 440 Hz slightly tenses up to body. This is because 440 Hz is out of tune with both macro and micro cosmos. On the contrary, 432 Hz is in tune. To give an example of how this is manifested micro cosmically: our breath (0,3 Hz) and our pulse (1,2 Hz) relate to the frequency of the lower octave of an A of 432 Hz (108 Hz) as 1:360 and 1:90. It is interesting to note that 432 Hz was the standard pitch of many old instruments, and that it was only recently (19th and 20th century) the standard pitch was increased. This was done in order to be able to play for bigger audiences. Bigger audiences (more bodies) absorb more of the lower frequencies, so the higher pitch was more likely to “cut through”. One of the oldest instruments of the world is the bell ensemble of Yi Zeng (dated 423 BC), tuned to a standard F4 of 345 Hz which gives an A= 432 Hz. The frequency of 345 Hz is that of the platonic year! Similarly many old organs are tuned in an A=432 as well; for example: St. Peter’s Capella Gregoriana, St. Peter’s Capella Giulia, S. Maria Maggiore in Rome. Maria Renold’s book “Intervals Scales Tones and the Concert Pitch C=128 Hz” claims conclusive evidence that 440 Hz and raising concert pitch above scientific “C” Prime=128 Hz (Concert A=432 Hz) disassociates the connection of consciousness to the body and creates anti-social conditions in humanity. The difference between concert pitch A=440 Hz and Concert A=432 Hz is only 8 cycles per second, but it is a perceptible difference of awareness in the human consciousness experience of the dream we share called existence.
Likes
18
Share
10/08: i just switched the lights over to 12/12. I am pleased enough with how the grow phase has gone, though i made some mistakes, and i am frustrated with how significantly different these phenos have been in their grow patterns. The canopy isnt great, and two pf the plants are significantly taller than the others. And i simply was not able to train them the same. I took 3 cuttings of each and am hoping to propagate them and keep a mother of my favorite of the 4 plants, assuming any of them actually end up with color. Really looking forward to the next couple of weeks as buds start to grow in. Fingers crossed for purple.
Likes
9
Share
So these girls have started to explode , they were one of the first ones to get into their new home , so they are LOVING life right now. The goal for this week : Attach all shoots to the tomato cage , - get them ready for flower 🌹🌹🌺!! I'm still working on getting a better set up for pictures, although they aren't in the best spot for pictures they are EXTREMELY happy with they lighting !!! position. Find these gorgeous genetics at: https://greenpointseeds.com/ Find all about the nutrients that fuel this grow So I was just putting a note in their that when I was doing the video the temperature the leaves were slightly wilted . This was just do to a temperature.
Likes
2
Share
Day 84. Very tall, big plant. I think it'll be a high yielder. Very impressed with Twisted Trees genetics. Day 86. Nice purples showing thru.
Likes
1
Share
@LAShugars
Follow
Growing fast and strong 💪 May back off on the Silica Gold for a couple waterings. It’s working almost too well.
Likes
20
Share
@PAPH_Grow
Follow
Day 51 - Really bushing out and getting wider. Some more hairs are visible, yet no real bud production yet. Roots are long and healthy looking. Still going strong with the same nutrient mixture. Day 53 - Topped up water today and had a casualty unfortunately. 😕 Day 56 - Switched lights to 12-12 to try and induce the flowering process on day 54. Today they are looking like they have more hairs coming along. Also topped up water again. Plants are still growing very fast. And getting bigger and bigger.
Likes
38
Share
@Natrona
Follow
Divine Seeds 2025 Auto Contest AK-47XL Auto 👉Sponsored Grow👈 W8F4 7/20-26 The hot weather returned with humidity and days of scattered thunderstorms. I fertilized once this week with I49 and top dressed with worm castings. Thankfully with all the rain we’ve had this month she doesn’t show any deficiencies or bud or root rot. I fertilized with I49 grow 1 tbsp/gal & 2 tbsp I49 Flower. My auto AK-47XL grew 1 more inch and is now 32 inches tall. She demonstrates resistance to pests and fungal diseases. As always, thank you all for stopping by, for the likes and most of all growers love and support. Stay green, growers love 💚🌿 💫Natrona💫
Likes
2
Share
Vamos familia, actualizamos la cuarta semana de vida de estas Runtz de MSNL. Tuve problemas con la temperatura que estuvo alta 28/26 grados y humedad dentro de los rangos correctos, la única queja es la temperatura, 16 horas luz, 8 oscuridad, estiraron un poco, pero van lentas por el momento, que cojan fuerza. El trasplante a sido realizado a la maceta definitiva, 7L con sustrato Top crop. Hasta aquí todo, Buenos humos 💨💨💨
Likes
15
Share
@Papabro2k
Follow
This one was a please watching grow I never did much training and she never got so much attention in the back turned out great ! So much frost thanks 😊
Likes
10
Share
@Sunofa420
Follow
Plant is loving it I haven’t hang issues with tho grow at all we did some defoliation this week and that’s all
Likes
2
Share
@SamDo
Follow
Journal de culture - Semaine 3 de croissance La plante a bien repris sa vigueur cette semaine, développant une belle masse racinaire, ce qui est très encourageant. Elle continue de se développer et je m’efforce de la maintenir la plus basse possible en utilisant des techniques de Low Stress Training. J’ai essayé le pinching, qui consiste à pincer légèrement les extrémités des branches pour les courber. Cela permet de rediriger les hormones de croissance vers les parties inférieures, ce qui maximise le développement des pousses. J’ai également effectué une légère défoliation en enlevant quelques grandes feuilles superflues. Pour le reste, je surveille principalement le pH. J’essaie de le maintenir autour de 5.8, mais avec les tampons présents dans les produits Terra Aquatica, il remonte régulièrement à 6.2. Je me demande si ce pH légèrement élevé pourrait être à l’origine d’un problème de coloration des feuilles, car la plante semble présenter une légère carence malgré la présence de tous les nutriments nécessaires. Je fais attention à ne pas ajouter trop d’acide afin de ne pas surcharger la solution nutritive. Globalement, la plante est en bonne santé et continue de bien évoluer. Je pense passer en floraison d’ici une ou deux semaines maximum. Étant donné qu’il s’agit d’une variété Jack Herer, qui a tendance à beaucoup s’étirer en floraison, je préfère la maintenir encore un peu en croissance pour travailler tranquillement avec les techniques de Low Stress Training et la défoliation. On verra son évolution la semaine prochaine ! 🇺🇸 Grow Diary - Week 3 of Veg The plant has regained its vigor this week, developing a strong root mass, which is great. It keeps growing, and I’m trying to keep it as low as possible using Low Stress Training techniques. I’ve been trying pinching, which involves lightly pinching the tips of the branches to bend them. This redirects the growth hormones to the lower parts, maximizing the development of new shoots. I’ve also done a bit of light defoliation by removing some large, unnecessary leaves. Other than that, I’m mainly monitoring the pH. I’m trying to keep it as close to 5.8 as possible, but the buffers in the Terra Aquatica products keep raising it to 6.2. I’m wondering if this slightly higher pH might be causing some discoloration on the leaves—it feels like a deficiency, even though all the necessary nutrients are present. I’m cautious about adding too much acid to avoid overloading the nutrient solution. Overall, the plant is healthy and continues to grow well. I’m thinking about switching to flowering in a week or two at most. Since this is a Jack Herer strain, which tends to stretch a lot during flowering, I want to keep it in veg a bit longer while working with Low Stress Training and defoliation. We’ll see how it evolves next week! 🤘😎🤘
Likes
2
Share
@Aleks555
Follow
We’ve officially entered week 7 with our FBA 2506 from 42Fast Buds, and the transformation is impressive—our girl is now in full bloom! After a smooth and steady vegetative phase, the flowering stage is progressing beautifully. The decision to experiment with a 12/12 light cycle for this autoflowering strain has proven to be an interesting choice, and so far, the results are encouraging. The plant stands tall and strong in its 10-liter pot, with a well-structured shape thanks to early LST. The climate remains stable with daytime temperatures reaching up to 30°C and an average range of 27–28°C. Humidity levels are consistently between 60% and 65%, which has supported healthy growth throughout the cycle. We continue to feed her with Xpert Nutrients, and the impact is clearly visible—dense flowering sites, vibrant foliage, and a healthy overall appearance. The aroma is starting to build, and the buds are forming with great structure and frost. So far, this grow has been a pleasure, and week 7 marks a crucial point where everything starts coming together. We’re excited to see what the final weeks will bring!