Recommended
Likes
36
Share
@Roberts
Follow
Now 14 days into light schedule change. She has been growing good under the Spider Farmer G3000 light. I am running at 65 percent on the light for the moment. Everything is looking good. She should have some pistils by next update. Thank you Spider Farmer, and Amsterdam Marijuana Seeds. 🤜🏻🤛🏻🌱🌱🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash
Likes
38
Share
Flowering day 3 since time change to 12 / 12 h Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I've started flowering even if some are still a bit small, but otherwise they'll get too wide from training and end up taking up space :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/hippie-therapy-cbd Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
15
Share
Mid-week, I topped the plants, and #2 has been selected as the mother plant, showing growth traits closest to the Skunk phenotype. I chose this plant for its expected resilience, which I'm now starting to test. The plants are currently receiving foliar feedings three times a day and are kept in very humid conditions. #2 was exposed to intense LST, with the stem slightly bending at this young stage — there’s a chance I might need to grow a new mother plant, but we’ll see how it recovers. So far, they’re loving the conditions and growing quickly!
Likes
12
Share
@Krissci
Follow
Day 6 - all is well with both plants. Organic molasses teanyo be used going forward to increase sugar and flavour
Likes
2
Share
@LAShugars
Follow
Bud are thickening up. Buds are still pretty small though. She smells wonderful. She’s getting super frosty
Likes
2
Share
@Cornfed
Follow
This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.
Likes
5
Share
@TJHeadley
Follow
This week was a little late due to the holiday. This is the week RSQ Wedding Cake flipped to flower. I accidentally super cropped her when trying to bend a branch over. After that she started drinking a whole lot more (hence the underwatered pictures)
Likes
5
Share
10-24-2024 ALL THE STRAIN RECOMMEND FLOWERING TIME IS 7-8 WEEKS TRY TO FINISH WEEK 8 STILL HAS 19 MORE DAYS... LAST FEED WITH NUTS .BURNED SOME OF TOP FAN LEAVES ...... BUT CHECK OUT QUEEN,DR SLEEP , WULFF ,POWER... CRAZY FROST TOE TO HEAD SMELLS .............NEED TO RUN FANS WITH HIGHER SPEED FOR SMELL... NO MORE NUTS....JUST WATER .....STAY IN THE COURSE... STAY GREEN .... 10-27-2024 -HIT THEM WITH HUMBOLDT COUNTY NUTS G10 -5ML PER GAL SNOW STORM -5ML PER GAL PURPLE MAXX-7ML PER GAL EVERY TWO DAY NEED TO WATER....
Likes
11
Share
@Stacks
Follow
Started with some light feeding at the beginning of week 3. A third of the normal dose.
Likes
3
Share
@GRow_M8s
Follow
Not much to report this week. Buds keep getting fatter and still producing new white pistills. Going to tie the side branches as well as they almost bent to the ground.
Processing
Likes
5
Share
@Highdro
Follow
I continued like normal with the feed expect for one day which I just put pH correct water in the tank as I saw I little nutrition burn on the leaf tips. The temperature was difficult to maintain so I added a fan adjuster so I could regulate it easier.
Likes
12
Share
@thonhash
Follow
En esta última semana de crecimiento hice el trasplante a definitiva de 7l y las afghan fueron trasplantadas a definitiva de 11l. Aplicamos enzynabis para una mejor recuperación de nuestras raíces. Como podéis ver,aunque hayan sido pequeñas,si tenemos todos los parámetros en “sintonía” perfectamente aguanta una buena poda de bajos y seguir con mucha más fuerza.
Likes
8
Share
Nice big buds. At week 6 of flower I’m gonna stop feeding nutrients now just water from now
Likes
7
Share
The girls are moving along nicely just watering with water ph to 6.4 this week as I top dressed with Gaia green 4-4-4.Spider farmer Se7000 dialed in at 30 percent and to the ceiling.Noticed some minor deficiencies Day 12 and check soil slurry 50/50 soil/water and the ppm was at 780 lil high at this early stage and the culprit.Going to work on lowering that a bit this week.I did add a top layer of fox farm ocean forest as well which runs a little hot with nutrients rather than the pro mix.I have to remember with these beautiful auto flowers less is better :)
Likes
24
Share
NOTES: Keeping pH at 5,8-5,9 through the entire Vegetation-phase. EC is now around 1,2 and i'm increasing it if needed. I'll be checking the levels regularly from this week since all of the hydroponic systems are now running. I'm going to add some ice cubes in to the nutrient tanks to cool nutrient solution a bit always when I remember to, even though temperatures haven't been an issue so far. Can't do any harm so why not I quess. I'm also adding a CO2-bag in to the tent above the plants. Also I'll begin training my plants this week by topping them. Day 22 (8.11.) Lights are set to 70%, water pumps are now on for 24/7 (EBB's drain water is on lowest setting possible to avoid drowning the roots) and pH is 5,8-5,9 / EC 1,2-1,3 on every hydroponic system. I topped all of my plants and cut off all of the lowest leafs with single tips and some of the small nodes starting from them. Day 23 (9.11.) pH-level keeps on raising so I'm gonna be measuring it pretty often. I'm correcting it by adding some pH- while filling up the nutrient tanks with small amounts of fresh nutrient solution at a time. Everything's going well and I can't wait to flower these! Day 24 (10.11.) Lights are now set to 80% power at 70-75cm height from the tops. I cut off the rest of the lowest nodes which I had left to some of the plants while topping them. I don't think they would get enough light when they are bigger. Day 25 (11.11.) Removed the lowest (three-pointed) leafs of each plant. Day 26 (12.11.) I moved the Led's a bit higher (now at ~90cm above plants) and set them up to full power. Plants are now around 11-14cm height and growing like crazy! Day 27 (13.11.) The growing has exploded and these plants are getting bigger and bigger. I'm going to defoliate them lightly and remove the lowest nodes so the plants have around 6 nodes each going forward, hopefully I'll get an even canopy. Day 28 (14.11.) I changed new nutrient solution in to the EBB-flood system which has the Ayahuasca's on it. I'm keeping the EC at around 1,3-1,4 and pH at 5,8-5,9 on every system. Also added small amount of Cal-Mag in to both NFTs.
Processing
Likes
5
Share
Bud development going strong this week, seeing lots of sugar leaves and new bud sites forming each day. Hoping to see the buds stack a little more soon. All seven plants are in flower now, this purple trainwreck plant being the furthest along. She should have another 4-6 weeks left before her chop.
Likes
12
Share
@greenAF
Follow
MW6Bar Controller Level 8(520w) UVA Bars 365-370nm (54w) 10min on 50min off and 10min at the beginning of the night. IR 730nm (26w) 10min at start of night. Front Left Koosh The Magic Dragon #4 Front Right Tricho Jordan #5 Back Left Tricho Jordan #5 PPFD 1025-1275 6.5 pH Feed EC Tricho 1EC (Fade formula) Taper down to 0 by day 60 KMD 3 Switching to fade around D59 Sub EC 0-3 TJ 5-5.5 KMD Dryback Target: 60-70%