Missed posting last week so this is actually week 13. Stopped nutrients and starting to flush with just ice water, probably gonna harvest next week!

Stopped cal-mag, possibly too much cal-mag causing uptake issues with P&K.

Day 40: They got recoverd from overwatering. Leafs got darker because I gave them more nutrients, but gained early signs of slightly overfeeding ( Burnt tips on leafs). I had to boost them to fix it because there isn't much time with autoflowers. Now i only have to adjust my nutrient feeding with just 10 to 15% and its all good. They did stretch again, some growers love it but i think it is ugly and you will gain weak stems. I have to do something about the heat soon, because i want my buds compact and not fluffy. This will happen due lots of heat. I also have to start give them cal/mag, i saw first stages of deficiency. Not a problem when you are early with spotting it. Nice lovely buds so far Thats all for now Day 42: I have been defoliating alot to get the air between the plants. There are still some leafs and branches i want to get rid off, but i don't want them to stress out to much. Also i have killed of 23 smaller plants to make more space for the others. This is always painfull but stupid if you don't do this. If the plants didn't stretch that far due heat and low placed lights, this would not have been the case. I would still have alot of small nice plants. This was more the case for the gorilla's but it had to be said here as well since the Cherry Cola's will profit from it as well. See you guys next week!

Week 6 At the beginning of the week I simply finger pressed the new node growth to begin separation and branch direction. 3 days after the last topping, I set up the tomato rings and attempted to tie down train the branches. In retrospect I should have given another day of growth before trying to tie to the new nodes. One plant made the LST training without issues(green tomato ring), however I snapped 2 center colas on the second plant(orange tomato ring). From experience I know that these will not produce tall colas since it happened so late in Veg, so I decided to completely remove them and will monitor for any new growth on those nodes to remove it. So now Im growing an 8set Mainline And a 6/4 set Manifold: Mainline : is a planned topping and defoliation of every cola that makes all topped splits have roughly the same distance to the roots for water ways by removing all other growth along at the same point on any cola. Ideally this helps generate mostly equal buds along the whole cola after each topped split and then the whole plant without having to use scrog nets and just local support ties instead. In a Mainline you remove any other growth that would otherwise need those water ways to grow as well, so Manifold: is the same thing as Mainline but in Manifold you leave a few branches to grow from a lower start point on any cola and then remove everything else. Ideally this gives mostly the same benefit as Mainline but if planned correctly allows you to be finished topping in just 2 separate topping days rather than 3 separate topping days. (I am using it here to correct this late veg mistake in my breaks) The tie downs are positioning 6 of the colas to grow out flat until it can reach the outer bend of the tomato rings where I will allow them to stretch straight up in bloom. 2 cof the colas will have the lowest node of braches growing up in the middle for a total of 4 branches. However in the 8 cola plant I am also training 6 to the outer ring and 2 colas to grow up in the center of the ring. Feed this week was again an auto pot reservoir feed at 400ppm total before add-ins. I used 360ppm Veg concentrate mix (recipe week 2) and 40ppm Bloom concentrate mix (recipe above). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) to all feeds and ph balance this week was for 6.3. Next week will consist of more LST training with a simple move of the wires as needed. Feed will increase in total ppm and bloom mix and I plan to reduce ph to the 5.8 range slowly, so about 6.1 this week and 5.9 next before flip on week 9.

À vite germer au moment de la planter en terre je me suis aperçu qu'il y avait 2 germe.

Pics and video were taken a few days ago been busy as shit lately so the update is a little late. I'm gunna put the video up first on all of them then go back and upload the pics so if come back if the pics arent up yet.

4/28 Day 35 I wish this plant was bigger. Could be my fault. Her transition to flower was at such an odd time(3weeks) and that’s when her last feeding was coming to an end but should I give her flower nutes early? Do half an half? Or just wait and then give flower? I waited and I shouldn’t have considering that organic inputs take time to feed your plants. Depending on what you’re using. First time trying Gaia green. I do like the ease of it but it would take some adjustments for me to utilize it best. A month between feeding is too long for my impatient ass and it gives me too long of a commitment to not fuck up. I’m also using roots organics with some other plants and I’m really liking the weekly feedings. It makes more sense than a month. What if I have a strain that’s like 10 week flower? Do I just do another dose at week 7 and 8 and then because it’s “organic you don’t need to flush” thing. Probably over thinking it but yeah here’s my plant yall 😂

This is looking like the final week on the mango, they are 2 weeks into flush now and the colours are so vibrant! I am off on holiday in September and need ten days to dries these before hand, so I maybe forced to crop next week Friday. We will see how it goes. I have been checking the plants all over for milky and amber trichomes. So far I can say the mango has about 80% milky 15% clear and 5% amber..... she's not far off 🤤. The amnesia has about 75% milky 24% clear and 1% amber. These do vary between top and bottom of plants of course. But take them as an average. The amnesia is sooooo fat! And I am in love with tho colours of the mango. Will keep you all updated and add some proper photos of the final plants on harvest (without L.E.D light), that will all be next week. See you then!

I think she is ready fro harvest, ill give her a couple of days more, nice strain, at this stage she smells a lot, sometimes she smells like garlic other times its fruity but not tropical, i have not figure out how to describe it.

This week is another step towards the end goal of getting to see these beautifull buds. Gave them a dose of build a flower on day 17. Gave them a heavy dose of molasses on day 21 mild on 17 with flower. 1 pheno is getting covered in resin early. All have a musky gas smell as of now. Something sweet them fist open the tent.

Week 6 of growth was another bumpy ride. Temperatures climbed up to 27–30 °C (Celsius), which is definitely on the hot side, and humidity sometimes dropped as low as 40–45%. That combo put some serious stress on the plant. To fix it, I made a simple but effective move: I turned off the exhaust fan. Right away, humidity went up to about 70%, and the plant clearly started looking more comfortable. She seems to be handling these new conditions much better. I did make a mistake this week, though. Wanting to push growth a little too fast, I cranked up the light intensity too quickly, jumping from 300 to nearly 600 PPFD. With humidity already so low, that sudden boost dried the plant out. She definitely felt it, but I caught it in time, adjusted back, and now she’s recovering well. A bit of lost time, but nothing dramatic. The real highlight of the week has to be the Athena nutrients. The pH stayed locked at 6.1 from start to finish, without moving at all. I really appreciate that kind of stability, and I’m excited to see how it will impact the plant’s health and growth over the next few weeks.

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Recherche Genetics never fails!

Hey everyone . This week she was left in her 1 L pot, and will not be in the 11 L pot until next week :-). She was topped again and accepted it super 😃. By the time she is repotted next week and given Green House Powder Feeding for the first time, she will have received a small portion of Canna Vega :-). Otherwise it grows very quickly and vigorously, and they look beautiful 😍👌. I wish you all a lot of fun with the new update, stay healthy and let it grow 🙏🏻👍 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

first issue, one of the plants has some spots on a leaf, which started popping up around the time of a watering, but I was also away for a few days and only got around to watering a few days after I had planned to. so I suspect that it might have been too dry which might have caused the EC in the medium to rise too much? No idea, let's carry on.

Pianta very good... complimenti a fast buds.come sempre si più dire che sono tra i migliori creatori di auto...grandi fast buds.continuate così arriverete AD essere lì migliori in assoluto,🤞👍💪💪💪💪

Up to now they looking pretty good and strong, even tho some of the plants are not as dense and is maybe a bit late to date with the other ones. Ill have to give them another 1 or 2 other weeks until harvest. The trichromes look preety good even tho.in the picture dosent show well. They starting to consume less water and the leaf colour is starting to fade slightly .