Recommended
Likes
Comments
Share
💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds Well we are just 35 days and folks shes doing pretty good 👌 It's been a crazy few weeks 👉 huge storm rolled in and we lost power for around 4 days😳 so I had to get creative and then i has some uptake issues over the weekend 👈 So I gave them a light flush and then switched to there new brand of nutrients and began there new regiments 👌Just need to remind myself to take it easy 🤔 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a UR45 to the mix👈 www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A+B Agrogardens Bloom A+B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈
Likes
23
Share
@simps
Follow
Shoog from BulletProof genetics this little plant is growing fast strong happy with the girl who’s gonna be a big plan I can tell both Plants are growing pretty well s Shoog one It’s growing faster than shoog 2 put both plants are doing pretty wellShoog one is really taking off One of my favorite plants this year so far just like haw fast it grows and how strong and healthy this plants are I have high hopes for theses phenos trying to find some amazing strains to work with on my breeding projects bulletproof genetics has some amazing genetics if you get a chance go check them out on Instagram or bulletproofgenetics.com
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
14
Share
@Xdreem
Follow
Week 5 into flower. When sampling the smell of the fresh bud it has a strong scent of citrus and pine. Under natural lighting the plant is a nice dark green with white sugar hairs looking frosty
Likes
26
Share
@Sickone
Follow
Ab geht es in die nächste Woche alle Ladys machen hervorragende vortschritte in die breite. Zudem sind die Abstände der neuen Abzweigungen relativ gering und gleichmäßig. Aktuelles setting: 18/6 Zyklus 60-75% Luftfeuchtigkeit Temperaturen liegen zwischen 20 und 25 Grad regelmäßig. Der Ventilator kommt täglich für 10 Std zum Einsatz allerdings noch gegen die Wand gerichtet damit die Luft Abprallen kann und frühstens 2 Std nachdem das Licht eingeschaltet wurde da die Ladys meiner Meinung nach den Tag nicht direkt mit Stress beginnen sollen :) Zudem entwickelt sich bei einer Pflanze (Welche vermutlich eine andere Sorte ist vom aussehen her) einen stark bekannten Haze Geruch der mich direkt zum lächeln bringt wenn ich sie besuche! :) PPFD: 470 DLI: 30,5 LUX: 18.000 Kelvin: 5100 Dünger bisher nicht verwendet da sie noch frisch umgetopft sind und der Biobizz Light mix laut angaben und Infos von anderern Growern für 2-3 genug Nährstoffe besitzt. Edit: 27.04.24 Eine Lady sieht krank aus :(
Likes
10
Share
@sam_doze
Follow
my method of cultive was the germination based from a simple kitchen's sponge and a tupper glass lately... my girl is 1 day old lately... my girl is 6 day old
Likes
16
Share
Got everything hung up. Stripped the fan leaves and broke down into sections. Run 60/60 or as close as i can get until the stems snap.
Likes
14
Share
Here we are again ready to start again, always under the sign of Zamnesia, we make our fantastic plants and we show you what we are capable of. We have 5 autoflowering strains and 5 photoperiodic ones and now we present them to you. The third autoflowering but certainly not in order of importance (where she would probably be the first) that we present to you is the Sticky Beast. Don't mess around with both the relatives Bubble gum and Og kush and in fact it is a strain that has won awards at cannabis cups. This was advised and recommended to us directly by the elves of Zamnesia and we are sure that they are keen to send us refinements, we must admit that we have already grown it in the past and indeed there are some dear friends who will be very happy to smoke it again. To explain my germination method which is a combination of experiences acquired in the field and readings of the right advisors, I have chosen to divide it into phases so that those who want can follow them and understand better step by step. - Preparatory Phase ---- Check the average temperature in the room, humidity status to understand if it is the case to start or wait, I decided for the end of August because the temperatures start to drop towards the 22-25 degrees recommended for germination. Then another thing more or less credible depending on the sensitivity is the control of the lunar phases. I believe in it a lot, it is a method that ancient farmers used to understand when it was best to plant depending on the attraction of the moon. To make my life easier I use a simple app that advises you on the right time to plant, harvest and put in the jar (depending on the lunar phases). - Phase 1 --- Soaking in water. There are many authoritative friends who advise against this method due to the risk of drowning, but I have always been fine and I follow the rule if it opens in water the seed is almost certainly healthy and will come out of the ground 90% normally. - Phase 2 --- Opening the seed in water. As soon as the seed opens and the root comes out a little, you have to be very very careful not to leave the seed in the water open for too long. This is why there is a risk of drowning. So as soon as the root comes out, it must be planted. Do not wait for it to stretch out a lot, you can wait a little longer in the absorbent paper, but not in water. - Phase 3 --- In the meantime, while I soaked the seeds, I prepared my pots: I use small biodegradable pots (choose the ones with holes underneath for drainage). A few hours before working with the opened seeds, I moistened the soil with water adjusted to the right pH (5.8 - 6.2) and Plagron Power Roots. The small root is now open and we can make a little hole with a toothpick, widen it and insert the seed. Not too deep with the root facing downwards. From Serious Seeds we learned the dome technique: if you put a small dome of soil on the seed the water will settle on the sides avoiding overwatering problems. - Phase 4 --- The plant emerges from the soil. So far I have not put the light, now I turn it on at minimum after half a day of soil to give direction to the seedlings. The first week the light will be gradually brought from 40% to 60% to go to 70% - 75% in the remaining weeks of veg. During the first week maximum, I keep the cycle of 24 hours to avoid stretching. Be careful not to exceed the first week at least with photoperiodic plants. - Germination % --- In water 20/20 seeds have opened for good luck I'm waiting to talk when they come out of the ground but it seems that we are going towards an excellent percentage of germination..."Not too bad"... - Soil and Food --- The soil used is entirely organic in every part and is the Plagron Promix that will be used with the 100% organic pack provided by Zamnesia complete with all the main fertilizers for your plant buy it at the link -- https://www.zamnesia.io/it/11457-plagron-easy-pack-natural.html // Strain Description // What happens when three famous strains come together? Sticky Beast Automatic by Zamnesia Seeds is a pure autoflowering composed of some of the best strains. From this combination, where the delicious flavors of Bubble Gum meet the famous OG Kush and the productivity of Critical Auto, a real autoflowering is born that is extremely easy to grow! // AWARD WINNING STRAIN // First Prize at Autoflowering Highlife CUP 2018 -- - ​​Get a seed of this amazing strain --- https://www.zamnesia.io/it/3331-zamnesia-seeds-sticky-beast-automatic-femminizzata.html - Soil and Fertilizers entirely organic --- https://plagron.com/en - Growbox --- https://www.secretjardin.com/ - Music and sound --- I made my girls listen to 432hz frequencies and music from www.radionula.com - Z --- You can find these seeds, much more from the world of cannabis, mushrooms and an incredible series of accessories and gadgets on the reference site not only mine but of many growers ---- https://www.zamnesia.io
Likes
142
Share
Hi everyone 🤗. The end of the last remaining women is slowly approaching 😍. They all look beautiful and will all be ready in the next 6 - 12 days 😎. I am very excited about the tastes 😍. I wish you a lot of fun with the diary, stay healthy 🙏🏻 and let it grow 🌱😎
Processing
Likes
88
Share
@Fergie
Follow
hey guys so not much happen in last week girls are filling out nicely ,going to repot next week have new 10gallon smart pots coming . still on r/o water with 10ml calmax every gallon . Til next week😀
Likes
72
Share
@BodyByVio
Follow
This week I finally completed the RDWC system. Everything is working how it suppose to. The chiller is set to 66 degrees Fahrenheit. Also I start adding 1000ppm CO2. Lighting intensity ( Fluence Spydr 2i) is set to 75%.
Likes
3
Share
Another week for this SOG of Auto's from our friends fastbuds, at the moment they are doing great, i do notice that some genetics required less food than others (they all got the same amount but some showed signs of N toxicity last weeks) At the moment we noticed the stretch and we needed to put the lamp higher, we are growing with a TS1000 at the moment and things are looking good 😊 The strawberry gorilla is getting a lot taller than the rest
Likes
7
Share
Hi everyone 🤗 This week Topping was applied :-). It starts to develop really well, the Green Buzz Liqudis fertilizer is noticeably good for you 😃👍. There is unfortunately nothing more to report this week :-). I wish you a nice week, stay healthy 🙏🏻 and let it grow 🌱. You can buy this Strain at https://thecaliconnection.com/original-sour-diesel.html You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Original Sour Diesel ( Clone ) ☝️🏼 Genetics: Fem seeds- Original Sour Diesel to Original Sour Diesel BX3 RVSD Male Reg seeds- Original Sour Diesel x Original Sour Diesel BX3 Male 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Likes
17
Share
@Targona
Follow
Technical and general parameters of the breeder: Sativa dominant citrus terps that hash makers and extractors will love. An excellent autoflowering hybrid that boasts an impressive 24% THC to match her amazing flavor with potency. Well recommended for novice growers looking for a low maintenance, yet extremely productive cultivar that will flower from seed to harvest in 9-10 weeks. This strain can grow to become one of the larger autoflowering hybrids, making it a wise choice for commercial growers looking for something special. Technical Specifications: Taste: Orange, Sweet, Sour, Creamy THC: Up to 24% CBD: < 1% Indoor harvest EU: 500 – 650 gr/m2 Indoor yield US: 1.6 – 2.1 oz/ft2 Harvest outside EU: 60 – 300 gr/plant Outdoor harvest US: 2 – 11 oz/plant Size: XXL Height: 110-150 cm Height US: 43 – 59 inches Flowering: 9 – 10 weeks Room: Indoor/Outdoor Gender: Feminized Genes: Sativa 70%/Indica 30% Genetics: Orange Sherbet Auto Autoflowering. Yes For cultivation I used: Cultivation area: 80x80x180cm 1x circulation fan: 15W LED lighting: Mars Hydro TS 1000 - 150W - vegetation and flowering 💡💡 Exhaust: pipe fan - RAMTT100 Odor filter: PRO-ECO HF carbon filter 160-240m3/h - 100mm - maximum air flow up to 240m3/h 4x textile flower pots 11l Substrate: Plagron Lightmix perlite coco coir Thank you to all my friends who support me in growing, who give me advice - @Happy_Rakosnicek, thank you to my friends from Grow Diaries for likes, advice and support 😍❤️❤️ Many thanks to the Fast Budsb team especially @fast_buds_jessie for providing the sponsor seeds 🌱🌱😍 Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 Many thanks to Mars Hydro, specifically @Coco_Pan2022 for providing the Mars Hydro TS1000 sponsor light💡💡😉 Smoking Review: I will add the buds after about 10-15 days of drying 💨💨
Processing
Likes
8
Share
Likes
8
Share
@Kirsten
Follow
31.12.24: I have been readjusting the LST pegs and wire daily. Sometimes, twice a day! (I know, too much time on my hands)! 😆 The plants have responded fantastically! I'm so glad I gave it a go. Some plants have been a bit too tall, and I snapped Do-sì-dos P3, pulling the stem down. Audibly snapped 😬I let it be, though. It seems to have healed mostly, in only 2 days. I have increased the lighting to 70%. They're getting watered a few times a week, with 1 litre of Dechlorinated water, containing the following nutrients and additives; 1ml of Biobizz Bio-Grow, 1ml Biobizz Top Max, 1ml of Biobizz Bloom, 2ml of cal-mag, 1g of Ecothrive Biosys. The plants are responding well to this concoction, so it's all good so far. The leaves are looking greener and are getting darker. Will be monitoring to continue readjusting the LST ties. Also, to monitor the increased lighting level, to make sure they can handle that yet. 1.1.25: Happy New Year! I have continued to readjust the LST wire and plant pegs. Several times a day. Coincidence would have it, I have a 6ft tropical aquarium which was time for cleaning! I always water my Acer tree in the front yard with this water, with beautiful results 😍 👌 🍁 I decided to try it out in my indoor garden. I'll post photos of before and after to see the difference, good or bad 😅 3.1.25: Plants are doing very well, except for PPP3 I'm quite disappointed in that one, as I feel like it's wasting a space. I guess I'll have to keep it, along with the Do-sì-dos that I snapped twice, which refuses to die 😅 I started to lightly defoliate, which is difficult because I always get carried away with it. I'm going to water again with the nutrients in description of this week. 4.1.25: Continuing to defoliate and adjust the LST pegs and wire. Watered today with 1ltr of dechlorinated water PH'd to 6.0. With the following nutrients;- 2ml Biobizz Bloom, 4ml Biobizz Bio-Grow, 2ml Cal-Mag, 2ml Ecothrive Flourish, 0.2 g/ltr of Ecothrive Biosys. I've increased the Nitrogen by adding double the amount of Biobizz Bio-Grow. I'm trying to keep them growing for as long as possible! I really want to keep the strength up and keep the leaves nice and lush green! 💚 Will update here with more photos and videos. Thanks for checking out my diary 🍃 ✌️
Likes
15
Share
Kefir with a bit of molasses brewed out for b complex and microbes. But as u can see plant is just starting to beast, let's see how much weed we can get of this cultivar. Feeding schedule is once per week. only water on other days.