Week 15 - August 09, 2020 -Day 99 08/09: We’re almost at the end. I gave Aaliyah her first watering with plain water. I’m planning on chopping the top colas off of her in a week. Hopefully I can get something out of the lower growth that isn’t getting any light right now. Alexis is coming down in two and Annie in three. Annie has some damage due to the light, but she is hanging in there. Alexis looks the healthiest overall. She stayed pretty compact, so light is still able to reach her lower parts. I think I could’ve had a better grow overall if I would have stuck with using only 3-gallon pots. [General notes: The nutrients on the diary are based off what I’m giving Aaliyah. Alexis is on the previous weeks schedule and Annie in the schedule from two weeks ago.]

i feed with nutes last watering about two days ago my idea is to feed one more time before the two week flush not really sure yet i have at lease a week to figure it out being the end of the plants life cycle is soposed to end in another week idk master growers were yall at?????😅

d.50 a few spots appeared on the leafs. gave a 10 ml dose of bio p k and waiting a week before giving a dose of orgatrex and bactrex edit: d.50 i also gave 0.5 ml of calmag from Biobizz edit d.53 will i be giving her the orgatrex and bactrex treatment ✌️🌞 d.53 she got 20 ml orgatrex, 1g of bactrex and 0.5 ml of biobizz calmag d.54 added scrog and did lst with clips to even out the height and space… still need to adjust it.

Nice

Day 64: It seems to go well. I am still keeping an eye on the "hanging" leaves. I think they tend to hang a little more when light on, and less with light off but its hard to say if it is normal. It might be as @GrowingGrannie mentioned, they might be under watered, as there is not much run-off at the last couple of watering's, maybe 1l each time and I will give them a 30% run-off next time to be sure UPDATE: I have noticed some more brown spots on the right plant caused by Calcium Deficiency. I think I should up the PH a bit more, going for 6.5 this time. I will also increase my CalMag supplement by 50%, and do 30% run-off today Day 66: Thank you all for the kind answers 🙏 You all have different opinions, and it is hard to pinpoint the exact problem. I am almost certain that I got some heat/light stress as mentioned by @GrowingGrannie and @Chow_13. I have therefore raised the lamp and are keeping the dimmer very low, using about 140W in total. I am still investigating if there might be other problems to it. @m0use, thank you for your answer. I do not think they are thirsty, at least not any more, as I am already on the subject for the last couple of days. About PH, It was difficult to get a good picture of the PH solution, but it was light-green to green (6.5-7.0) on the picture (And that was run-off PH) and what I put in was adjusted slowly from yellow to light-green aka 6.0-6.5 (I wrote 6.25 but it was auto adjusted) @gottagrowsometime, thank you for the answer. I do not think it is a nitrogen toxicity. My leaves aren't that dark green, although they are a bit to the dark side but not like what I see on other pictures with that problem. I also think the curling is caused by light/heat stress as I just got a new lamp and are experimenting with it. But I will keep your suggestion in the back of my head! @Chow_13, thank you very much for your answer. I think you are spot on, however I am not sure it is the only problem... It might be as you say, nutrients are not absorbed correctly due to the light-stress, but I will not put all my money on that @Nugsery and @GrowingGrannie, a big thank you for your answers. The deficiencies might not be the same, but the cure is very similar. I cannot make up who is right, but I do have a plan. I will follow your recommendation @GrowingGrannie and @Nugsery, and do a flush, but with a ph 5.8 as both nutrients should be able to be absorbed in that level. I will then give her a light nutrient mix and adding PK, also 5.8 ph. This is almost the same solution for both deficiencies. I will then slowly get the ph back to 6.2 @ernesttwwg, thank you for your answer. I have known for some time I have some Interveinal chlorosis, but I do not know what is causing it. There is multiple deficiencies giving those symptoms. The tacoing of leaves, and leaf tips curling down I think is caused by the light, and I have therefor raised the light. I will keep investigating the symptoms you mention OBS: I will not edit my nutrient schema as this is only temporarily, next watering will be as described UPDATE: After flushing with 15L~ ph 5.8~ and a small feed with 5.8~ ph I still get about 6.5~ ph in my run-off water. I am going to do another flush tomorrow to see I can bring it down to around 6.0~ ph Day 67: I think I see small improvements on the leaves. The new heat/light level seem to have done something. I did that second flush and are still getting about 6.5 ph in run-off.... I think I will let her dry for now, monitoring what happens, and do another flush in a couple of days

I have seen significant growth this week. Looking good and smelling great!

Flowering day 19 since the time change to 12/12. Hey all together 😀. This week she has developed beautifully ☺️. I poured it 3 times with 1.2 l this week. Tomorrow I will add the 2 g GHSC Powder Feeding Bio Bloom because the first blossoms are coming :-). I checked all the leaves thoroughly for pests or diseases and everything is fine ☺️. Next week I'll look at your roots as soon as the coconut is completely rooted. As every week, the tent was cleaned and the entire technology checked. The humidifier was also refilled every day 👍. In the next few days I will remove the bottom shoots so that the energy doesn't end up being wasted in the small popcorn buds. I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: GHSC Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

This plant had a 2 week veg time and yielded insane buds

Final week. Shes been on ripen for 3 days what a beast

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This variety is extremely productive with an incredible flower / leaf ratio despite its large size. I collected the first plant of this variety two days ago so I will update the data on the final weight, the taste and the effect during the Christmas period, meanwhile I wish you a Merry Christmas and happy holidays with a video dedicated to male growers 😋 obviously many wishes for a Merry Christmas and happy holidays, but without videos, to all the female growers! 😘 Data updated on January 9, 2020

Ernte Ertrag von OG Kush war 80g trocken Schmeckt super und riecht sehr lecker

Day29: New sets of leaves. I'll repot and switch to proper Veg Lights on the weekend. Day30: I'll repot tomorrow. Day31: Repotting done. She had a crazy amount of roots in the seedling pot. MUCH more than I expected. I switched to Veg lights at 90% power. Day32: Settling in new pot Day33 & 34: I had to perform some maintenance on the tent. Lost some hours due to that. Day35: Growth really looking healthy. Although she's not really stretching high, she does look rather happy. I do like them thicc ;) General: I need to put the camera somewhere else so that the growth can be better seen. Right at the end I'll edit out the white flashes. They're caused by the humidifier running and will be really easy to cut out without losing the gist of the grow :)

🍬

Hello, Hello! This week has been another pretty solid week. Kind of continuing where we left off from last week. Just continuing to monitor the grow room conditions and make adjustments as need, though its been super solid and not a lot has been needed. I did lower the power of my light back down to 50%, some of my leaves were starting to taco and I came to the conclusion it was due to some of the branches being closer to the lights, but other than that no real issues. I did up the EC by .1 this week so now we are running at 1.0 EC and 5.9-6.1ph. These ladies are really starting to pack on the weight and trichomes this week and looking forward to see the changes over the next week or so! Temps have been pretty stable around 77-78f and around 50-55RH. I did do another round of light defoliation on the day of water change, but nothing too crazy. Getting excited to see these girls finish! As always, any tips, comments, or recommendations are greatly welcomed and appreciated. Thanks everyone, you guys rock!

I backed my light up a little and let my nutes sit for longer this time. She’s improving. Think I’ll up my ph on the next watering. Trichs are starting to come in I added a dish of water to up humidity. Don’t know if it’s helping. One of the pics has a blemish. It’s from me, not spotting from deficiency. She’s looking yellow and skinny. Stems got really dark

🔥

End of week 5.

21.10.24 BT# 50 Servus Liebe Leute, Blütewoche 8 hat angefangen und wir kommen den Ende langsam nah. Die Tricome werden immer mehr das Mikroskop sagt das es noch ca. 10-14 Tage sind. 80% sind Milchig ein Paar sind Amber der rest noch klar. Die Pineapple Express verstreut ein Herrlichen Duft von frisch geschnittener Ananas einfach ein Traum bin auf den ersten Geschmacks Test gespannt. Jetzt warten wir die benötigten Tage ab aber erst mal gibt es wie gehabt nächste Woche das Update. Vielen Dank für den Stopp bleibt alle Sauber denkt dran Stay High. Mögen all eure Ladys Gesund und prächtig wachsen und euch mit schmackhaften Stuff versorgen 💪🏻😋🍀 ■■■■■■■■■■■■■■■■■■■■■■■■■ 21.10.24 BT# 50 Hello dear people, Flowering week 8 has started and we are slowly approaching the end. The tricomes are getting more and more the microscope says that there are still about 10-14 days left. 80% are milky a couple are amber the rest are still clear. The Pineapple Express scatters a wonderful smell of freshly cut pineapple - simply a dream - I am looking forward to the first taste test. Now we wait for the required days but first there will be an update next week as usual. Thanks for the stop, everyone stay clean and remember to stay high. May all your ladies grow healthy and splendid and provide you with tasty stuff 💪🏻😋🍀