Likes
Comments
Share
well this littler creeper weed is the smoothest i have ever tasted, this pheno expressed as a hint of citrus and very smooth very white ash. Nice and relaxing couch lock.
Likes
25
Share
Permanent Marker weed strain possesses the genetics for high anthocyanin production, which is responsible for its signature deep purple. While the genes are present, the expression of these colors is often enhanced by "thermal stress" (lower temperatures) during the final three weeks of flowering, which triggers the production of these pigments. 👋 Raising the Carbon-to-Nitrogen (C:N) ratio in the growing medium to avoid over-immobilizing nitrogen, on the flip side, being careful not to trigger early autophagy. Moderate, controlled increases in sugar support the energetic demands of flowering and act as a signal trigger, but excess sugar is more likely to inhibit flowering or damage the plant. Balance, like everything else. Visually, when the chloryphyll green gets darker, it is a subtle indicator that the concentration of nitrogen is increasing / more is being stored than is being used. I noticed when you push very high intensity lighting, it slowly fades the green as the plant degrades chloryphyll faster than it can be replenished. When the green of the leaf continually gets darker, it is an indication that the concentration levels of nitrogen are increasing, and I dont want to increase light intensity. Turn down the nitrogen faucet. C:N ratio dictates the rate at which nitrification occurs, if at all. The Carbon-to-Nitrogen (C:N) ratio acts as a critical biological "on/off switch" (or regulator) for nitrogen turnover by determining whether microbes immobilize (consume/tie up) or mineralize (release) nitrogen during the breakdown of organic matter. This ratio regulates microbial activity by defining the balance between available energy (carbon) and building materials (nitrogen). The C:N ratio in a medium acts as a critical regulator of nitrification, effectively functioning as an "on/off" switch for the dominance of either autotrophic nitrifying bacteria or heterotrophic bacteria. The shade of green in chlorophyll is subtly linked to the enzyme Rubisco through a co-evolutionary, functional relationship designed to optimize photosynthesis. Chlorophyll absorbs blue and red light for energy, reflecting green light, a process that ensures the "light-dependent" reactions provide the correct, controlled amount of energy (ATP and NADPH) needed by Rubisco to perform its "light-independent" carbon fixation. Because Rubisco is a relatively inefficient and slow enzyme—often considered the bottleneck of photosynthesis—chlorophyll and the overall structure of the leaf have evolved to manage energy distribution to prevent overwhelming the Calvin cycle. While chlorophyll absorbs mainly red and blue light, it is not perfectly efficient, and leaves appear green because some green light is reflected or transmitted. This reflection allows light to penetrate deeper into the leaf, preventing the surface chloroplasts from becoming overloaded and enabling a more efficient distribution of energy to the high volume of Rubisco located throughout the leaf's mesophyll. The rate of chlorophyll-driven electron transport (light reactions) is matched to the potential rate of carbon fixation (Rubisco activity). If Rubisco were faster, leaves might be darker; however, the "shade of green" represents a balance that prevents chlorophyll from producing more energy than the inefficient Rubisco can process. The green color itself is a byproduct of a photosynthetic system tailored to feed a slow, yet crucial, enzyme (Rubisco) just enough energy to maximize carbon assimilation without inducing excessive oxidative stress or inefficiency. The shade of green in leaves is directly linked to the concentration of chlorophyll, which is in turn strongly correlated with the amount of Rubisco (Ribulose-1,5-bisphosphate carboxylase/oxygenase) and, consequently, the rate of carbon fixation. Darker green leaves generally indicate a higher concentration of both chlorophyll and Rubisco, signifying greater capacity for photosynthesis. Increase output or reduce input. Subtle tells. While an excess of nitrogen (specifically ammonium) can cause an imbalance, nitrification—the microbial conversion of ammonia to nitrate—is highly sensitive to a variety of environmental, chemical, and physical factors. Because it depends on specific, slow-growing bacteria (Nitrosomonas and Nitrobacter) and archaea, anything that stresses these organisms can disrupt the process.
Likes
7
Share
Welcome to Flower Week 5 of Fast Buds Purple Haze Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto Purple Haze: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 8 Weeks • Strain Info: 23%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 12 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
31
Share
this lady has stayed very short but bushy , she is drinking the least out of the rest and bud production has been minimal so far , i gave her a light / last defoliation this week and she has already recovered , purely too open her up too the available light , i really do hope she very soon steps up a gear with bud production otherwise i dont think there will be very much on the scales at the end , again have had absolutely no issues with this plant at any stage and she certainly has had more than enough light on her too produce , so lets watch this space and see what she can do ,
Likes
60
Share
The girl is progressing well. She is receiving around 25 DLI of light. I did a topping.
Likes
18
Share
@Diips
Follow
recently topped. she have also come a long way! shes gonna be a real beauty
Processing
Likes
5
Share
Processing
Likes
24
Share
@GrowGuy97
Follow
HUGE shoutout to Paul at New420GuySeeds for sending me these new 3 Run Homer test seeds to try out! I am extremely excited to see how this grow goes & to make it even more interesting there are currently no diary’s with this strain on GD! Everyone go check out their website & get some for yourself! I will be back tomorrow with day 1 pics when I get them planted! Keep watching & happy growing friends!✌️🏼🤙🏼🌱 Day 1 - Everything is going great all 3 seeds popped!👍🏼 Finally got them planted & watered with Fox Farm Big Bloom (6tsp per gallon) Day 2 - I can see all 3 seeds starting to come up we are off to a great start👍🏼✌️🏼 Gave them a little more water this morning with big bloom, grow babies grow! Day 3 - Everything is going great!🙏🏼 Day 4 - All 3 are growing strong👍🏼 Day 5 - PH water 6.4 Day 6 - end of week 1, everything is looking good✌️🏼🌱
Likes
19
Share
@Kirsten
Follow
This week, the plant is feeding heavily and has grown well. I super cropped the main stem to help with the plant becoming too tall, afterwards I made some scaffolding and a sling to hold the break and prevent it from snapping. It has taken very well. Before the training I performed, I used 4 bamboo canes to stake the base. The plant had become very top heavy so this has really helped. The plant was becoming very tall so I thought this would be something to try out. Here's what I did this week. 18.7.25: I watered with 2ltrs of dechlorinated water PH'd to 6.4, containing the following nutrients; 💜 2ml Ecothrive Trace PH: 6.4 PPM: 365 22.7.25: I watered with 3ltrs of dechlorinated water PH'd to 6.6 with; 💜 1 TSP Sea K PH: 6.6 PPM: 485 25.7.25: I watered with 2ltrs of dechlorinated water PH'd to 6.5, containing the following nutrients; 💜 2ml Ecothrive Trace 💜 1/4 TSP Ecothrive Biosys PH: 6.5 PPM: 361 28.7.25: I watered with 6.5ltrs of dechlorinated water PH'd to 6.0 with; 💜 7ml Trace 💜 1.5 TSP Ecothrive Biosys PH: 6.0 PPM: 351 Thank you for checking in this week and hanging out in the comments 😁💚✌️🌱🙌
Likes
70
Share
@IstrGrow
Follow
The weather in my country suddenly got warmer unexpectedly. That's why I'm having problems with the temperature. Still, it seems to be going well for now. I watered on the 51st day. I will do it again today and with full fertilizer.
Likes
57
Share
@AsNoriu
Follow
Day 43. Light is on max output, heat enormous and they RUN !!!! thought intensity will stop them a bit , but i think i do only worse ... We have +30 heatwave in UK, i live in attic , so for 4 more days everything will be out of control. Watered today. 6.3 phed water. I love simple and affordable Mars Hydro products, if you can cope with heat TSL2000 can do magic in your tent ! Will update after heat wave us over. Should be in 4 days back to +20 ;))) Day 45. They GROW !!!! Distance is insanly small, but i have 30 cm of space left, wont move light for a week, then i will try to have 20 cm at least again. Planing last top up, need two more waterings before it, so it should be on last day of this or first of next week. Thinking to take down all LST at that time, need pots to breath better, too thin fabric, they dont keep form. Day 47. Drink every two days !!! 4 liters goes to nothing !!! Huge, still streching, tops almost rubbing TS2000, heat 30 inside, humidity 65-68 ..... will need heavy clearing again !!! Devil is looking droopy because was just watered. Happy Growing !!!!
Likes
7
Share
Maturing fast. Some botrytis unfortunately . Have to dig in to incoming air filtration to limit spores. Ac infinity terraform just been released maybe it could help with more sterile air.
Likes
6
Share
Esta semana, aumentamos a tope la potencia de los balastros, 660w. Realizo la segunda y última poda baja en toda la sala, así nos aseguramos de que las plantas concentran los nutrientes en la parte alta, que es donde reciben más luz, además de facilitarnos el riego y el control de las mismas. En los riegos alternados entre abono y agua cada tres días, eliminamos Bio Vega. También realizo un segundo tratamiento foliar de Propolix, justo antes de que se apaguen las luminarias.
Likes
10
Share
They are growing fast and start preflowering. Drinking 1,5l with 2ml fertilize every 36h.
Likes
10
Share
Week 10, transitioned nicely into flower. Had her first and last spray with some Moonshine Sunshine Spray. Stay tuned to see what see ends up like