Planta fácil de cultivar, de estatura media y producción importante de tricomas. Sus fragancias son dulces parecidas a la panela, canela, especias y un fondo un poco kush con notas a crema. Flores hermosas macizos, compactas y totalmente cubiertas de fragante resina, las tonalidades son hermosas, al moler se despliegan todos los aromas y ese tono violeta en el interior de las flores. Gracias a fastbuds una vez más por su confianza y a toda la gente que sigue el contenido. Buenos humos!

This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎

Hi :) it’s 10th week in my happy grow :) girls looks lovely, Smell is awesome I think terminator does it’s job :)generally I’m so proud of my girls, of course it was not without mistakes but it is my second indoor experience so still learning from mistakes :) this way we will come to perfection :) new project from fastbuds is on the way! check what’s coming! :) happy Sunday for everyone, peace! Day 66 update resulting decision of defoliation. I treated them well but in my opinion they can catch a big breath now :)

The time is finally here to post the harvest. I waited till it was all done and dry before updating the dairy so will add in the dry weights next on the 2nd half of the harvest entry. I enjoyed this plant a lot, its grew well and loved how it was shorter and fatter. I wonder if it was at the dame distance from the plant if It could have done even more. Had some issues with the yellowing that was happening on the other plant in this tent. I should have treated this faster with a flush but was super reluctant and it may have hurt the yields a bit. The top best looking buds looked and smelled amazing even the lower buds where doing well not so larfy like the other plant. There was crazy strong smells with this plant, sour berries and hints of lemon, it was a best smelling plant I have grown to date. This would be a great plant to grow for beginners, cant take a lot of stress and still produces quite well and even on lower wattage leds it was good. It was not the most crystally looking plant, not like the maltezerz but still had some finger hash buildup but a small amount. I feel this plant would be a winner for a rosin press. I don't plan on growing this strain out again despite me liking a lot of qualities about it. I'm only trying to grow cbd dominate plants is the main reason. If my friends really like this I have some clones so can always give them some. Speaking of clones they are doing well outside, greened up a lot and showing signs of revegging. Took some photos of the weed hang drying on day 1 in the tent and a week later to show how much they shrink. Only some of the lower growth is larfy, will make good edibles or hash, that will be a fun project to do and may include that in my projects diary. That's about all I can think of if you have any questions just ask. m0use Disclaimers: 1. I have divided the total watts of light in half, 300w(150w) for this diary. It will accurately reflect the g/w ratio as the two plants growing in this tent are listed in two separate diaries. 2. I include any shake/trim in my gross totals as I use them to make edibles. 3. I did not follow any proper ways of listing my nutrients. Some are ml/l of total solution watered, others ml/l of total medium and some are just the total amounts I added, not as a ratio. If you have any questions let me know! +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Cost + Time Analysis Of Growing Cannabis. m0use’s Breakdown +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Light Schedule === Veg [Dec 18th 2021 - Mar 11th 2022] 18h on 6h off - 6am-12pm Flower [Mar 12th 2022 - May 10th 2022] 12h on 12h off - 9am-9pm This is extra tricky this harvest as I went through 2 different hydro rates in three different periods, plus a veg and bloom switch between them. Mon-Fri are TOU rates, all weekends are off-peak pricing all day. Off Peak = 7pm-7am + all weekend Mid peak = 11am-5pm On peak = 7am-11am + 5pm-7pm TOU rates: Dec 18th 2021-Jan 17th 2022 Cost of kwh with on-peak "17.0c", mid-peak "11.3c" and off-peak "8.2c". Jan 18th 2022 - Feb 7th 2022 Cost of kwh with on-peak "8.2c", mid-peak "8.2c" and off-peak "8.2c". Feb 8th 2022 - Current Cost of kwh with on-peak "17.0c", mid-peak "11.3c" and off-peak "8.2c". — Dec 18th 2021-Jan 17th 2022 Weekdays “21 days” 6am - 7am -- 1hr @8.2c/kwh off-peak 7am - 11am -- 4hr @17.0c/kwh on-peak 11am - 5pm --6hr @11.3c/kwh mid-peak 5pm - 7pm -- 2hr @17.0c/kwh on-peak 7pm - 12am -- 5hr @8.2c/Kwh off-peak Weekends “10 days” 6am - 12am – 18hr @8.2c/kwh off-peak 6h @17.0c/kwh 6h @11.3c/kwh 6h @8.2c/kwh + [email protected]/kwh weekdays/weekends — Jan 18th 2022 - Feb 7th 2022 Weekdays “15 days” 6am - 7am -- 1hr @8.2c/kwh off-peak 7am - 11am -- 4hr @8.2c/kwh on-peak 11am - 5pm --6hr @8.2c/kwh mid-peak 5pm - 7pm -- 2hr @8.2c/kwh on-peak 7pm - 12am -- 5hr @8.2c/Kwh off-peak Weekends “6 days” 6am - 12am – 18hr @8.2c/kwh off-peak 18h @8.2c/kwh + [email protected]/kwh weekdays/weekends — Feb 8th 2022 - Harvest Veg Feb 8th - March 11th 2022 weekdays “24 days” 6am - 7am -- 1hr @8.2c/kwh off-peak 7am - 11am -- 4hr @17.0c/kwh on-peak 11am - 5pm --6hr @11.3c/kwh mid-peak 5pm - 7pm -- 2hr @17.0c/kwh on-peak 7pm - 12am -- 5hr @8.2c/Kwh off-peak weekends “8 days” 6am - 12am – 18hr @8.2c/kwh off-peak 6h @17.0c/kwh 6h @11.3c/kwh 6h @8.2c/kwh + [email protected]/kwh weekdays/weekends — Flower March 12 - May 10th 2022 weekdays “42 days” 9am - 11am -- 2hr @17.0c/kwh on-peak 11am - 5pm --6hr @11.3c/kwh mid-peak 5pm - 7pm -- 2hr @17.0c/kwh on-peak 7pm - 9am -- 2hr @8.2c/Kwh off-peak weekends “18 days” 9am - 9pm – 18hr @8.2c/kwh off-peak 4h @17.0c/kwh 6h @811.3c/kwh 2h @8.2c/kwh + [email protected]/kwh weekdays/weekends — Total hours in each peak period 126+144+168 = 438h @17.0c/kwh 126+144+252 = 522h @11.3c/kwh 306+378+288+300 = 1,272h @8.2c/kwh Lights === LED’s I use are 48w and 18w, per stick, they are arranged on an array totaling 300w. 6400k 18w*6 = 108w + 3000k 48w*4 = 192 108w+192w=300w | 300w/1000 = 0.3Kw * note I am using 150w as stated in my disclaimers to account for the missing plant in a separate diary.* Using the previous c/kwh numbers above I can find out the total cost of the lamps in the 3 peak periods. I converted the cents into dollar amounts beforehand to avoid dividing by 100. 8.2c/h = 0.082$/h 438h * 0.17c/kwh = $74.46kw * 0.15kw = $11.17 on peak 522h * 0.113c/kwh = $58.99kw *0.15kw = $8.85 mid peak 1,272h * 0.082c/kwh = $104.30kw *0.15kw = $15.65 off peak The "h" hours and "kw" kilowatts cancel out and we are left with a value of $ dollars per peak period, add all the peak periods up and you get your total cost of running the lights in dollars. $11.17 + $8.85 + $15.65 = $35.67 for the grow light only. My light grew for 20 weeks and 4 days, or 144 days. almost 21 weeks total. $35.67 / 144d = 0.2477$/d average of about 25c a day in electricity 337.2kw for the entire grow. Using the regular calculation of grams harvested divided by watts used is not accurate to me, it does not account for all the time the lamps are on, the length of grow to the over all cost. The calculation that makes sense to me is this, harvested dry weight of usable cannabis buds/trim/keif/whatever in grams divided by total kw used. Could also combine it with grams per total single use costs “anything you used only for this grow and wont reuse in the next, or fractions of multi use items like fertilizers if they ½ full” and see how much you’re investing per gram. "kw" ÷ "g" = kw/g "$" ÷ "g" = $/g I have harvested 4.57oz or 129.6g on 337.2kw. 337.2kw ÷ 129.6g = 2.60 kw/g of usable cannabis. This is not an ideal ratio for me and looks like a lot of energy waste happened from the extended veg period. $35.67 ÷ 129.6g = 0.28c/g It cost 28c/g when comparing total electricity cost to gross yield, almost identical to the comparison of total electrical cost to the number of days in the grow 25c/day. Neat! legend, kwh = kilowatt per hour kw = kilowatt w = watt h = hour c = cents $ = dollars d = day LED= Light Emitting Diode

​🌿 VEG WEEK 4: AK-47 XL | Divine Seeds ​🌱 VEGETATIVE PROGRESS ​Moving through Week 4 and the response to the topping has been phenomenal. The growth hormone distribution has shifted completely, turning this AK-47 XL into a beautifully thick, bushy canopy with multiple strong shoots pushing up. ​Looking at the lower structure, the main stem is getting incredibly thick, acting like a solid tree trunk already. The node spacing remains tight, and the plant is developing a very dense structure from the top-down view. The fan leaves are wide, lush, and a healthy dark green, showing that she’s soaking up the light and converting it efficiently into rapid growth. No shock, no slowing down—just pure vegetative vigor. 📈 ​💧 NUTRIENT FEEDING & WATERING ​She is processing the current feeding well, supporting both the thick stem development and the new branch expansion. ​Current Feeding Schedule (per Liter): ​Root-Juice: 2.0 ml/l ​Acti-Vera: 1.0 ml/l ​Calmag: 0.5 ml/l ​Parameters: ​pH: 6.5 ​Relative Humidity (RH): 69% ​Temperature: 23°C ​VPD: 0.88 kPa (Perfect spot!) ​CO2: 716 ppm ​💭 GROWER'S NOTE ​The canopy is filling out perfectly after the top. We now have a great multi-topped baseline, and the side branches are catching up fast to create an even profile. Stem thickness is 10/10 for Veg Week 3, which is exactly the robust foundation needed for the heavy AK-47 XL yields later on. With a stable VPD of 0.88 kPa, environmental stress is at an absolute minimum. Ready to explode! 🚀

Mucha humedad ambiente y una ligera humedad radicular 👌🍀👨‍🌾

Continued feeding plant with each watering of 2 litres every 3/4 days. The flowers are fattening up nicely, into some bigish colas, meaning harvest isn't too far away. Removed some dieing leaves from bottom of the plant. Almost time to stop feeding and start the flushing process.

Ein regelrechter Höhenrausch prägt das Bild zum Start der vierten Blütewoche bei dem Junky 99 Projekt von Brothers Grimm Seeds. Der Stretch ist derart extrem ausgefallen, dass die beiden Damen kurz davor sind, die Decke des Setups endgültig zu sprengen – ein bisschen kompakter hätten sie im Nachhinein betrachtet gerne bleiben dürfen. Ob dieser massive Wachstumsschub nun rein an der Genetik liegt oder durch das für mich noch neue Advanced Nutrients System befeuert wurde, lässt sich schwer sagen, da ich die Feinjustierung des neuen Düngers für mich persönlich erst noch perfekt abstimmen muss. Eigentlich wurden die Pflanzen mit einer absolut soliden und normalen Höhe in die Blüte geschickt, doch die jetzige Dynamik war kaum vorhersehbar. Genau deshalb stand direkt zu Wochenbeginn das überfällige Lollipoping auf dem Programm, bei dem angesichts der enormen Gesamthöhe nicht zimperlich vorgegangen wurde: Untenherum wurde radikal aufgeräumt und kräftig weggeschnitten, was für die Durchlüftung und Lichtverteilung auch bitter nötig war. Trotz des extremen Höhenflugs stehen beide Pflanzen makellos im Saft; die Blütenbildung schreitet rasant voran und überall formieren sich vitale, vielversprechende Bud-Cluster, die schon jetzt einen exzellenten Eindruck hinterlassen.

Plan is doing very well. Paul needed about four or five times this week with about 12 to 15 flowers. Hand pollination occurred. Hopefully everything took

Original Sensible Seeds - Frosted Guava 🍈 🌸❄️ P-K 7-5 Boost 🌺🍭 Enjoy - Week 5 🌸 - 25-26 grad Celsius - 50-55% humidity level - 20l Air-Pot (75% BioBizz All-Mix, 25 % BioBizz Worm Humus) - RO-water (PH 6,3) Sanlight Evo 3-60 100%: about 1100-1300 PPFD Spider Farmer Glow30 12h/12h on

Going to chop her soon.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Día 54 (10/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1033 PPMs - pH 6,51 Día 55 (11/03) Defoliation time! Con la increíble ayuda de @miyaguiokpolilla, @dogdoctorofficial y @growwithflow420 hice la defoliación recomendada exactamente después de 21 días cambiada a 12/12 Consejos de defoliación - Elimine menos del 20% de las hojas de abanico y solo las hojas de abanico - Retirar el tercio inferior de la planta, incluidas las ramitas. - Retirar las hojas en forma de abanico dirigidas hacia el interior de la planta. - Retire las hojas de abanico que dan sombra a los futuros cogollos. Día 56 (12/03) Esperando algo de estrés tras la defoliación... Han crecido 2 centímetros en 24 horas 😍🚀 Día 57 (13/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1043 PPMs - pH 7,0 Las plantas muestras una ligera deficiencia de CalMag. Voy a subir el pH a 7.0 en este riego para mejorar la biodisponibilidad Día 58 (14/03) Siguen con su crecimientos, los cogollos formándose y las hojas de azúcar empezando a llenarse de resina Parece que la corrección de la deficiencia de CalMag ha sido muy efectiva! No hay más manchas y las plantas no paran! Día 59 (15/03) Como mañana me voy a Spannabis 😍 voy a adelantar 1 día el riego reduciéndolo a 1 litro Riego 1 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1080 PPMs - pH 6,57 Día 60 (16/03) Spannabis time! 🚀 Día 61 (17/03) Spannabis time! 🚀 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae 🎚️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1

1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂

Topped all 3 of them, going strong in the cold. 12 celcius with light off

The seeds were planted three days after the paper towel and the first one grew out of soil the same day.That seed was planted with its first leaves(cotyledons).

Day 36-42 Ladies gettting bigger. Putting in net for LST Btw Day 42 already Flower Day 4! So the pics near the end are start of flower :) In my opinion the stretch is not that much, so keep them ladies longer in veg. Looking back i d say veg another 10 days maybe and then get them into flower. Mine was too early

buds are starting to get heavy I had to put a few on steaks