Week 1 from germination! Ganja Farmer Seeds - Mandarine Auto Light cycle: 18/6 Watering when dry Light: ViparSpectra XS2000 at 50% Everything is going well thus far! Excited to see how she grows! See you all next week

📸 some macro shots 🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FastBuds 420

Week 1 from germination! Ganja Farmer Seeds - AK 2.0 XL Light cycle: 18/6 Watering when dry Light: ViparSpectra XS2000 at 50% Everything is going well thus far! Excited to see how she grows! See you all next week

Welcome to my Ganja Farmer contest grow. Drop a like if you want me to drop by your grows. Either way thanks for dropping by She's doing really well. Would like for her to have bigger buds. Should of started flowering her under my P1000. She has a lovely structure and some nice colors showing up on the buds which seem to be getting nice and dense 20/6/22 she's doing really well. Growing nice and strong. This time I think I'm going to have to do bud washing as the hair is just beyond a joke now. I'm going to do a deep tent clean this week. Just waiting on some stuff and I'm going to get my tents in order. Plant is at to getting struck down with what I'm nearly sure is iron defs. Found 1 to 2 leafs starting out yellow with green vains. Let the soil dry out after a few watering and gave them a boost of Iron (fe). (Have put up a video and focused partly on showing a light iron def. This leaf showed up like this 4 days ago. Took me a day to dry out the soil so it was a little harder to notice) but if I hadn't of fixed you'd of seen what looked like a N def (a yellow leaf with green vains) hope this video helps to help u. Feel free to DM me if you need me to go into any fixes 24/6 Have installed my new AC intake unit, it's more of an AC unit the way I have it set up. I have it outside the tent. And have a negative pressure environment. So, if I can drop my outside temp then in turn the inside temp will drop. There's no point in having it set up inside with the lights off as the RH will go sky high with no exhaust set up as that would defeat the purpose of having AC in an unsealed tent setup. Be good though when I want to grow with co2 this beast will have no issues keeping the temp in check. It's doing my whole top floor. Yeah, it's struggling. Have it set at 20% but it won't drop to 20% until you reach the temp you have it set at. It was 31.5 brought it down to 27.5 in 15mins and that's a top floor in a 3 bed big bedroom house. Id say it would work quicker with the door closed but my RH will only go high and I'd have to run my Dehumidifier and that well, raise the temp. Going to see what happens by dropping the temp to 24c when the air around the pre attached probe goes down to 24 it will go to the % you have it set at. But until then, (you reach the temp) it runs at full steam. It has brought the temperature down 2.8-3c in 15mins. Update. My AC unit intake is nothing but a big ass temp controlled intake, not control temperature. It does help draw up cold air from an extended 10m ducting so I can get 18c air if I want. Just gotta run big ass ducting threw my house. Just until I can punch a hole up into my attic. It runs 16c up there. But I'll need a filter 1st and then I can drop temps rapidly. Looked into an AC unit. They are affordable. A 7000 Btu unit would do my grow room. Runs at 800watts an hour but you have to hook it up to a window. My air outside at night is that temp so I'd be better just running poxy ducting from my attic using this powerful 110watt intake. It'll be great for air flow with co2 growing. I'll hook it up from the bottom to the top and run the ducting either side and let the unit sit on top of the tent. It's so powerful won't need any fans. Just co2 and high ppfd which I have now. Thanks for reading this week. gottagrowsometime

Week 13 started Sunday June 19, 2022 PPFD is around 900-1000 umol/s/m2 and from 16" to 13" inches away (two massive colas on right side) its over 1200 at 13" so I am worried about bnding those down daily She's fully back from her flowering transition and now putting energy into the colas. She has greened up, cal mag FTW. I have been running a diluted combo of Mad Farmer MOAB, don't ask, I just do it by gut feel and I read the label EVERY time I apply this. Running a little of Tiger Bloom in there, super weak amount. Hygrozyme now that the res has been up and clear for over a week holding Ph well, and no drama. AutoPot is performing better than I had hoped given the lack of parts, now fixed thanks to AutoPot support. Great team over there BTW. The valve is pulling water in just when the roots have been "exposed" for a short while (this is inside the pot so obviously blacked out). IOW there is a pocket with air stones that I run 24/7 so the soggy soil is continuously aerated. It pulls in my solution that is about 6.5 Ph as of this AM (Recall WW likes it a little higher). Now that I have her in flowering mode, she is wanting more heat and light so I lowered the lights and adjusted the fan to get humidity down I am ONLY running the COB LED right now because she is performing well enough and environment is pretty good Lots of airflow and she is healthy. Routine 🐛🐝🐜🐞, easily killed in one organic treatment of Crop Control and another from Dr. Earth. Fungus gnats, and a couple of other unidentified bugs Temps are pretty stable and my CO2 is high, sometimes over 1100 naturally. I do have a new Black Pearl Oyster mushroom going in the room, probably belong CO2, all air inlets into my two small cannabis tents are filtered with small particle filters and I egress hot air out of a 15 ft 6" diameter vent through the ceiling. There is also a natural vent allowing lots of fresh air into my space. It a great area to grow in. Light defoliation here and there, lots of bending and checking things, but otherwise not much to do except look for issues and maintain the environment, we are locked in for the next two weeks, just dialing in the environment and trying to get humidity down without running too much energy. 6/21 Adjusted TDS to 269 from 315 and added some Big Bloom to the mix in a super diluted form. This is prime time flower and she is feeding fiercely. I need to stack those bud site and put on some weight, so this stuff is always good to add. But always mindful of the MOAB, its a lot and I could easily burn if I goof up. *** Found that week 10 should probably be a vegetative week, so I I adjusted to represent more accurate timing. So I backtracked and fix some dates, yep I am in week three of flower not four, and I am probably on day 15-17 of flower, easily have about 40 days left. Before I posed my grow question I was guessing five weeks so I guess despite the mix up, I was thinking about the same time. Pics uploaded

Cada vez más hermosas, unas más grandes que otras pero en general un cultivo bastante homogéneo que desde ya indica que dará unos frutos realmente espectaculares.

got these clones of wedding cake from a local grow buddy, Thought I had room for them indoors but I was wrong. So outside they go for the year. They really wanted to reach for the sky indoors lets see how they do outdoors!

got these clones of wedding cake from a local grow buddy, Thought I had room for them indoors but I was wrong. So outside they go for the year. They really wanted to reach for the sky indoors lets see how they do outdoors!

This week I had quite a bit of color changes in the leaves of one of the phenos. I thought initially that it was a PH problem or something had gone wrong but I think it is just natural color changes. Might be a bit of rut on the leaves but they have not dried up and go crusty so it may be just the color. Lots of purple edging on the leaves. The buds are further along on one of the phenos, really frosting up nice. Thanks for visiting my page and reading this far.

got these clones of wedding cake from a local grow buddy, Thought I had room for them indoors but I was wrong. So outside they go for the year. They really wanted to reach for the sky indoors lets see how they do outdoors!

Flowering day 3 since time change to 12/12 h. Hey guys :-) It was about time that space in the flowering tent became available because the lady is already big in the vegi 😂👍. Now the time has come and I am really looking forward to the flowering. I put 20g of GHSC Bio Bloom on top of the substrate. was poured this week 2 times with 0.8 l. Have fun and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Water 💧 💧💧 Osmosis water with EC 0.0 Add Cal / Mag to 0.4 Ec and PH - to 6 - 6.4 MadeInGermany

got these clones of wedding cake from a local grow buddy, Thought I had room for them indoors but I was wrong. So outside they go for the year. They really wanted to reach for the sky indoors lets see how they do outdoors!

Hey guys :-) It's about time that space in the flowering tent becomes available because the ladies are getting extremely bushy and big 👍😂. was poured this week 2 times with 1 l. Have fun and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : DJ Short Water 💧 💧💧 Osmosis water with 0.0 EC. Add Cal / Mag to 0.4 Ec . Ph with Ph - to 6.0 - 6.4 MadeInGermany