Recommended
Likes
3
Share
@Papabro2k
Follow
Going to give her just water for a week or 2 now she seems like she’s done enough now
Likes
3
Share
Fattening up and fading yellow and purple. Believe she'll be a fast finisher and will probably go ahead and start the flush process.
Likes
36
Share
Grow notes week 3 #1 This plant is healthy and thriving. She’s the first to show pistols which means I should change her status to flowering but I won’t do that until it’s pretty obviously in flower. She’s taking the training nicely and I think I’m starting to figure things out when it comes to training.. the trick is to simply SLOW DOWN. #2 is looking great! Her leaves are healthy and node spacing is just how I like it to look. She likes LST and seems happy with the maxi grow/bloom series. The roots on each plant are healthy and white #3 is getting greener each day but I’m starting to believe it’s either genetics or this nutrient line that’s causing this effect. #4 is the thickest and biggest plant of the bunch. However, she is displaying rust spots and potential calcium or iron deficiency on the lower older leaves. I may have to feed heavier on cal mag while running this nutrient line up. Thanks for reading this far! I hope you enjoy these time lapses of this weeks growth.. as always Stay highly dedicated & highly medicated folks 🔥🌿😎💨 Peace & blessings upon you!
Likes
19
Share
@Comfrey
Follow
Day 80 This morning I started defoliating Tropicana. She will be in the darkness for the next days. I already harvested a part of the head flower and let it dry trimmed. Because of extreme weather conditions and very high humidity I got a little bud rott. I found it out quit early I think. So I hope nothing will not happen any more. Just harvesting relaxed and drink a Tropicana tee. Day 81 I decided to cut her down in the evening. The humidity in the basement room is high and I don‘t want to risk here anything anymore. Waiting for my first homegrown weed to be vaped. Day 82 Tropicanas flowers hanging to dry in my basement. I check them once per day with a strong light. Day 83 Same same. The smell is wonderful like a bit of gas combined with a fruity flower bouquet. Our neighbors in the house like the smell, too. 🙏 Day 84 I could try my first homegrown weed. It‘s absolutely tasty and have a very smooth vape. I was very surprised cause it‘s not cured yet. A longer vape report will follow when it‘s dried and cured. Day 88 All flowers, sugar- and tee leafs are trimmed and filled in glasses for curing. I open twice per day for 20 minutes. Boveda packs 58% inside. I will fill out the rest of the diarie when my buds are dried, cured and vaped. So far this was a very exciting journey for me. Growing cannabis and even legal on our balcony. Feels still a bit unreal, but it’s real! Thank you for reading my diary! Thanks to all the people who worked on legalizing cannabis in Germany, especially to the „Deutscher Hanfverband (DHV)“! I will give more updates and write a vape report after curing several weeks. Maybe with some Tropicana Cookies baked in Comfreys garden kitchen.
Likes
6
Share
These girls are blowing up so I switched them to my bedroom tent and I also just ordered them a new light the ac infinity t22!!!!! I'm so excited to get that going next week. The phlizon I'm currently running is for a 3 by 3 and the tent is 27 by 27 inch. Back to the ladies so ones slightly shorter but darastically more bushy. The smaller one seems to get mildew issues is another reason I moved her to the smaller tent to drop humidity. The smells amazing and they are delightfully frosty for how early they are! Check back next week to see just how fast these buds are! & always remember its 4:20 somewhere!!!!
Likes
410
Share
CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛
Likes
69
Share
@Natrona
Follow
Fractal week 18 & 19. 7/28 - 8/4-10 I am late for my outside ladies diaries updates. Life has been getting the best of me lately. I’ve been packing my daughter’s room and moving her things to her new home. For those that have followed my since my beginning here, Cancer left me with neuropathy and arthritis in my hands. I can no longer do my glass fusing or flame work. To close this chapter of my life, I’ve been inventorying glass, tools, equipment, molds and supplies to sell. The most stressful has been appealing Medicare claims and receiving the second denials on the same claims. They are the last payer of record so good luck getting any reimbursement you are entitled to. My apologies to all of you for being so brief on your diaries and not providing many comments. Photos are from 7/28- 8/9 for both weeks. For my outside ladies, Opium, Auto Opium, Fractal, and Lemon Cake not much changed. They continue to live in sweltering conditions. Temps are in the upper 80-90s with humidity over 105. In addition to the heat, Hurricane Debby started up the coast but was downgraded to a tropical storm by the time it got to us. Expecting our normal thunderstorms, I waited til morning to bring the ladies inside. Overnight, we had wind gusts of 25mph. Yeah, then I brought all gals into the house. The photo gals are strong and with thick stalks were able to withstand the winds. Both Opium’s got blown over Auto Opium is thin and spindly and before I could save her from the winds and rain, she got whipped side to side. The top 2 feet bent hard one way and the top 6 inches bent the other direction. The pics show my attempt to bandage the damage 😟 to her top cola with chopsticks and electrical tape. I top dressed all ladies with Bloom Soil for organic fertilizer. Buds are fattening up, trichomes are minimal at this time but some fragrance is starting to be noticed. Thank you @DivineSeeds Thanks for the visits, likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending you good vibes of love, light, and healing 💫 💫Natrona 💫
Likes
15
Share
9/28 Day 24. Raised air pumps above the water line using two 5 gal buckets. Removed the inline air backflow valve and this increased aeration greatly! - Feeding day. Red TDS 850. EC 1.8 / Blue TDS 800. EC 1.7 / Yellow TDS 785. EC 1.6 / 10ml CalMag, 10ml Micro, 5ml Grow, 5ml Bloom, 2ml UC Roots. Will check TDS & EC through the week as they are starting to drink up the water. - LST started today. I will be adjusting them daily to pull off shoot branches in different directions. 9/30 Day 26. Added water for the first time. Used purified drinking water from the grocery store (Ph 7.45 TDS 95 EC .2) and PH'd it down to 5.9 10/1 Day 27. Readjusted the LST wires and added some new ones on the stems that can now be pulled in different directions. Red suffered a break on the main stem that went 1/2 through the stalk. I decided to use the LST wire to push it back together so that it can heal. I will still train the other shoots in different directions and let the main stem just do it's thing. Blue and Yellow pulled in new directions to open up the middle and spread out the stems. - I defoliated (light amount) some of the 3 leaf blades that were touching the container lids, and any larger 5 leaf blades that were blocking light to any new shoots with new stem growth and potential bud sites. I wanted to allow the air flow at the lower section of the plant. 10/2 Day 28. Everyone is bouncing back from the LST. Keeping a close eye on Red and the injury healing. I've decided to do a 1/2 of a weekly feed every 4 days instead of a mass feeding once a week. I will test the TDS and EC, see what the plants are telling me before I feed of course. (All values before feeding) - Red PH 5.98 TDS 720 EC 1.512 - Blue PH 6.17 TDS 728 EC 1.544 / Will add .25 PH down and re-test all in an hour after the feed to check PH values. - Yellow PH 5.93 TDS 708 EC 1.497 Feeding: 5ml CalMag, 5ml Micro, 4 ml Gro, 2ml Bloom, 2ml UC Root Guard. Post Feed values: - Red PH 5.78 TDS 808 EC 1.695 - Blue PH 5.90 TDS 846 EC 1.796 - Yellow PH 5.73 TDS 803 EC 1.700 Lessons learned week 4. 1. Be a little more gentle on LST. 2. Mark the water sight gauge at each 1 gallon increment so that I can track water replenishment levels. 3. Started a spreadsheet to monitor feeding value changes.
Likes
44
Share
Happy evening to all, farmers friends! Welcome to a new week of cultivation in the enchanted valley of Peaky Hello everybody! The best crops
Likes
17
Share
@Hashy
Follow
Week 7 Light cycle=12/12 Light Power=196w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=10.00pm Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=35-45 EC aim=1.9 PH aim=6.3 Fri 2/2/24 #1 (Day 43)(Day 5 flower) 📋 raised camera, nearly touching the roof. Sat 3/2/24 #1 (Day 44)(Day 6 flower) 📋 Defoliate a lot of lower leaves. Sun 4/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra Bloom=4.0ml/L Sumo Boost=1.0ml/L Roots=0.2ml/L Easy Ph down=0.115ml/L Ec=1.9 PH=6.1/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.62L (Est) Runoff. Total runoff=1.75L Ec=2.4PH=5.9/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 45)(Day 7 flower) 📋 Mon 5/2/24 #1 (Day 46)(Day 8 flower) 📋 H=69cm D=30cm DLI=41.1 Tue 6/2/24 #1 (Day 47)(Day 9 flower) 📋 Looks like the weather is turning cold again over the next few days. Wed 7/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.5L Ec=1.74 PH=6.6/ 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 48)(Day 10 flower) 📋 H=76cm D=23cm DLI=48.5 HST 1 cola. Thur 8/2/24 #1 (Day 49)(Day 11 flower) 📋 H=79cm D=20cm DLI=50. Raised light 5cm. Lowered power from 200w to 180w H=79cm D=25cm DLI=42. HST 1 cola. She is real bush. There is 1 cola that keeps stretching higher but I keep bending it down. Development is good and she is coming along at a decent pace. Was showing some signs of light stress. Lifted the light and Lowered the power. Hopefully she doesn't stretch much more because the light is almost touching its support bar. Back soon. Take it easy.
Likes
10
Share
Wet paper towel germination process took about two days for them to sprout a little bit and going to transplant on Christmas
Likes
6
Share
They've been root bound and only 2 survived that weren't male
Likes
7
Share
Gorilla Glue #1 - Harvest Comment - I Am Very Satisfied With What I Got, I got 3 ounce 7 grams - I Uses Advance Nutrients PH perfect In veg then I switch to the iguana juice organic juice for the flowering stage. I notice a much more slower growth when I switch to organic nutrients.00
Likes
45
Share
Hi there,On the screen u can see what means perfectionism, Power of Grower and the quality💚😎She is on THE BEAST MODE , One of the best strain I ever grown , This week is last before Flushing , I’m gonna dry the whole plant and soon ITS TIME TO HARVEST!!! 💚💚💚🍋🧀💚💚💚 All The Best , Richard.
Likes
13
Share
First week of florwering is over. They all already show pistills so induction was successful. I did a little defoliation to uncover bud sites and LST-d Strawberry Cough since it was much higher than the rest of the ladies. Now I do have even-ish canopy. CA$H and Mimozz are going superb. Cough is okay, not great, not bad. Grandpa's Cookies is a runt but I'll try to have at least some weed from this one also 💪
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D64/B27 - 18/06/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 26°C H: 80% 🌊 FLUSH 🍗 💧 💼 FLUSH first day 🧠 🚀 🎬 1 TL video ______________ 📅 D65/B28 - 19/06/24 ⚗️ EC: 0.2 pH: 7 🌡️ T: 26°C H: 80% 🌊 FLUSH 🍗 💧 💼 FLUSH second day 🧠 🚀 🎬 1 TL video ______________ 📅 D66/B29 - 20/06/24 ⚗️ EC: 1 pH: 6.2 🌡️ T: 26°C H: 80% 🌊 15 L 🍗 CalMag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D67/B30 - 21/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D68/B31 - 22/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 15 L 🍗 CalMag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D69/B32 - 23/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D70/B33 - 24/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video
Likes
23
Share
@goeser
Follow
Iam still waiting for one plant to dry. I will upload all details in 2-3 days. But what i can say is that i am happy with that strain and plants. I had nothing, only 7L pots and the sun (which was not regulaly shining well). Plus a bit of alga grow and plagron green sensation. The plants where all up to 1m high . The buds are reaaaaly sticky and frosty. I am impressed that i get no dry mouth after smoking it what is amazing haha. Cant wait to grow this strain again but in bigger pots, they should grow huge and with good quality buds.