Likes
Comments
Share
I had a lot of fun with this strain and it was grown against 400 growers so let me say PHENO hunting is a true thing. Overall the Bud was a nice dense structure and the smoke on it was smooth and the high nice and even.
Likes
2
Share
Looks like a lot of top sights. Afraid stretching too much. Hopefully it fills in.
Likes
4
Share
Rega com fertilizante. Aproximadamente 100 ml por planta. Observando. Observando, foi usado o mesma mistura de semana passada. alterando PPFD para 380
Likes
103
Share
🌱🌿🌸SUMMARY🌸🌿🌱 I started this crop with 4 plants as you can see in the pics, 2 autoflowers by RQS and 2 photoperiodics. My plan was as follows: grow the two autoflowering plants until harvest and in the meantime do a long vegetative period for the two photoperiodic plants, and then proceed with the switch. One autoflowering plants, the Titan F1, did not respond well to the training and I preferred to remove it on week 5. Fortunately there were no problems with the other three plants (I made a different diary focused on the two photoperiodic). Milky Way F1 grew in a space dedicated to her of 90 cm x 40 cm (0.36 m2), under a 150 watt lamp which in the meantime also illuminated the other plants. 🌱 GERMINATION (2 days) Seed in a glass of EC 0.4 tap water for 10 hours, then in root riot and under the lamp. It sprouted after 48 hours from dry seed. 🌿 GROWING STAGE (3 weeks and half) During the 23 days after sprouting she had an impressive growth ratio. When she reached 25 cm in height I decided to bent the main stem to the side. On day 24 I opened the canopy with some tie, then I removed a good amount of leaves. The key with this kind of auto, the F1, is not stress them in the wrong moment but if you want to boost them yield you need to do some train, carefully! During the veg stage PH was always between 5.5 and 5.9, about EC I started with 0.6 and was 1 on the last veg week. 🌸 FLOWERING STAGE (7 weeks) She began the flowering stage on day 26 from dry seed (was 20 cm height after the bending) and by the end of the stretching she more than doubled the height, reaching 46 cm despite the LST on week 3 and 4. During the flowering I just removed some leaves on week 4 and 8. The light cycle I used is 18/6 and the last two weeks I lowered the light hours to 16/8 first and 14/10 then. I chopped her when trichomes were 95% milky and 5% amber. That gave me a very balanced high. During the flowering stage PH was always between 5.9 and 6.2, about EC I started with 1.6 and was 2 on the last week before flush. ✅ HARVEST - From dry seed to harvest: 74 days (2 days germination + 23 days veg + 49 days flo). - Chopped after 4 days flush, no dark time; - Wet trim, removed fan leaves. This plant had a ridiculous calyx-to-leaf ratio, it was just big buds! ✅ DRYING STAGE - Time: 15 days; - Average: 18° C - 60% RH. - After that I made a dry trim, removed branches and sugar leaves. ⚖️ DRY WEIGHT - 110 gr very frosty buds, no larf 😁 ✅ CURING STAGE - Curing is done after 45 days with Boveda 62%.
Likes
5
Share
@Rizza78
Follow
Malt is sad after transplant. Red Hot good. Oozecake good. Seedlings are liking the new environment.
Likes
26
Share
The plants have taken to their Earthboxes, especially #1 with the BuildASoil Light. The Earthbox with my Coots mix was the runt, plus I damaged the roots during transplant so it has an uphill battle, but I wouldn't count it out yet. It was looking droopy and with slight discoloration, but after a drench of Kashi Blend Tea (1/3 cup Kashi Blend, 1 teaspoon blackstrap molasses in 1 gallon of water for 24 hours) it perked right up. As for preventative pest management, I've kept doing foliar applications every 4 days of EM-FPE -> EM-1, next week I will incorporate the just-finished EM-5. I made a JADAM wetting agent (JWA) but I have realized even local bottled water is too mineral-heavy for it, so I will need to find a source of distilled water if I want to use it in my foliar regime. Next week I will begin doing LST to get some more tops going. At some point I plan to add a trellis, I have been busy with work but I will find the time to set up something, preferably a trellis that can move with the Earthbox to facilitate maintenance and not have them fixed in place for the entire training and flowering cycles.
Likes
42
Share
Day 60: flushed 💦 Pictures are taken on day 62 --------------------------------------------- Super frosty buds, she is getting fatter 😁❄️ Happy growing 🦍🌱
Likes
10
Share
@YD_59
Follow
the plants are going well, im probably going to switch to flower in 2 or 3 weeks depending on if I can get bigger pots and a tray for them or not, I've also been defoliating the GDP plants and occasionally the MT plant if the leaves appear to be blocking the nodes/colas under it and the plants have been looking healthy
Likes
5
Share
@Bluemels
Follow
Tag 45: Leider hat eine Pflanzen braune Flecken bekommen. Vielleicht weil ich den Ph wert einmal bei 6,2 hatte? Der anderen Pflanze hat es nicht geschadet. Die schlimmsten Blätter hab ich heute mal entfernt, jedoch scheint sich das ganze noch weiter auszubreiten. Zum Glück ist es nicht mehr lange bis zur Ernte. Diese sollte spätestens in 4 Wochen sein laut RQ.
Likes
4
Share
20/06/24 (FD 22): Stretch is about done, the smaller skunk plant decided to overtake it's sister and measures now nearly 60cm! I felt like the ladies really needed a haircut, so I gave them a nice one. Took off ~1/3 of the lower leaves + shoots and a bunch of upper fan leaves to bring down humidity & allow for a better air circulation! Weather is still quite shit and it's hard to get dry air during the night time, I just hope I have a good enough ventilation system to prevent mold... Also cranked up the mars hydro TS1000 to 100% and I hope buds will swell nicely from now on!
Likes
16
Share
@Rando1314
Follow
Switched to 12/12 a few days ago. Girls are loving it!! Also after treating for bugs of some sort I let loose ab 50 ladybugs (most of which died but some are doing well) hopefully they pick through and get rid of anything left behind. Color is good but there’s a few brown spots and brown tips on a cpl leaves. Defoiled a bunch of leaves hoping it pushes all growth upwards. First time scrogging so this is all experimental for me so I hope I’m doing well! We shall see in ab 8 weeks when she’s ripe I can’t wait!!!
Likes
79
Share
Week 10 Last week of Vegging, switching the lights on 12/12 cycle. Xmas is in 8 weeks now 😄 Stretch should start in approximately 7 days. I might have 2 plants (Lemon Cream Kush) finishing on the side, will see how they stretch, I didn’t expect such a Vegetative growth. Adding some pictures of what an excess of Nitrogen looks like and when the EC level of the soil is too high for a plant. Keeping an eye on the new growth of the week, the leaves aren’t clawed, meaning I can add some Nitrogen again by the end of next week to give them what they need for the beginning of the stretch. Took off some few leaves, the big fans leaves, recovering the lower shoots to give them some light. The shoots will become buds sites during flowering. Remember last week, when I spoke about the case of working in a Grow Op and the need of another week of Veg ? Plants are filling up all the light coverage now, increasing yield and gr./watts, the boss should be happy and will probably forget about this extra week 😊 Stay tuned for the Jungle show 😄 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Processing
Likes
7
Share
Likes
18
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G
Likes
53
Share
10 September Harvest - see pictures. While some growers leave the plant whole when they cut, I do not. It is a personal preference and situational convenience if your a home grower. I chose to cut large, long branches, and remove any whole water leaves, as long as it doesn’t interfere with the bud formation. I don’t trim yet. This is done for a few of reasons: 1) It’s my last good close-up look at her until another 5 days or more, 2) I don’t want wet leaves drying on my buds if I can help it, and 3) I occasionally like being able to shine a small LED flashlight on the flowers while its drying. Mold is our greatest problem as growers, it can destroy a beautiful grow right up until the end process. Then I hang it in a dark closet, provide circulation and ventilation. Light and heat, anything above 80 degrees F, will start a break down in cannabinoids during the dry, it is ideal to stay away from both. I’m fortunate that a humidity level of 50- 55% and temperature of 65-70 degrees F is fairly consistent and easy to maintain. Anything below 60 degree F will prevent the adequate drying out of chlorophyll. Almost all my flower routinely take 5-7 days, some a little longer, to properly dry out. 15 September Trim - see pictures. First you’ll notice the buds have shrunk up to half their original size. This is just a fact that we growers have to deal with. Due to evaporation without uptake of water, it takes about 3 days for the chlorophyll to dry up, then slowly go through a chemical change. Along with the leaves, cannabinoids also begin a chemical change after 3 days called decarboxylation. A slow process where the THC level increases while curing. You want the leaf to be dry so they can be hand trimmed easily, but you do not want that bud so dry that it starts to fall apart in your hand. Try to handle carefully by the main stem to avoid touching the bud all together. A lot of these cut leaves will be covered with trichomes, good for making oils, or other products, it’s an option worth looking into keeping it. After trimming, I do separate a few premium flowers for my first smoq. Then loosely fill wide mouth quart mason jars with about 1 oz/28 gr of product per jar. I seal the lids for a few hours to determine what relative humidity they are at, see hygrometer pic, before making a decision to put in a 62% humidity control pack of my choice or to wait, then place in secure in a cool dark place with stable humidity and temperature. It is very important to then observe/burp or exchange the air as needed, up to several times a day, until 62% rh is achieved. Once your close to to your mark, put in your desired RH level control terpene shield. If you have a problem getting there: 1) it has dried out too much, no real solution, try to put several large cut stems left over from harvest into the jars with the buds to try and increase humidty, 2) it has not dried out enough, in this case no problem, just remove and dry out a little more. This is also a personal choice, some people like it drier in the 50% plus range. Whatever you do, research and preserve. At that time burping is no longer required. Cannabis will reach its peak potency potential at about 40 or so days into the cure. The finished product should be a perfect grind when cured correctly without clogging up your grinder, this could take a month. Now that I’ve said that, I’m sure someone has grown something that they have not been able to grind. It can remain in this state for an easy 6 months with little change, locking in all the terpenes and potencies. All you need to do is occasionally check the product to ensure there are no molds. If your grow/harvest/cure techniques are good this should not be an issue. It would not be uncommon to find many cannabis strains will last, with small degradable change, for up to one year after being stored this way. Using an airtight glass container, controlled relative humidity, maintained low temperature, and kept in darkness will equal maximum shelf life. Always avoid direct sunlight and temperatures above 80 degrees F. The reasons I’ve ultimately chosen Deep Water Culture as a grow medium. Each has their own pros and cons indeed. I found the most efficient, less maintenance and ideal solution for my situation was DWC. Burdens to overcome depend on size up set-up; initial equipment cost, size of containers, ph monitors, air pumps, type of water to use-reverse osmosis, RO cost/set-up/maintenance, ways to transfer/change water and nutrients, what nutrients to use and schedules, takes several grows to learn and understand, a 1 year learning curv, easy to nutrient burn. The Benefits of growing in water; no dirt, no bugs, no diseases, rare nutrient deficiencies/toxicities, steady and rapid growth that enables the plant to reach its genetic potential. After harvest, there is about a 1 hour equipment cleanup, sterilization and turn around process before replanting. Cannabis will perform in so many different ways and mediums, no one way is the best and the best way is the one you are using, right. Chose what works for you in the long run. There will always be an initial cost in set-up. My advice if one were in need to cut corners, I would not recommend cheap lights. This single factor is the most critical, afford for the best. The notion that organic and water has a different taste, flavor and potency effect is absolutely debatable. The more we learn the better we grow and experience is always the best teacher. This is what works for me and my methods of growing in general from beginning to end. A BIG “Thank You” to everyone who stopped by to take a look. My next diary will start at the beginning of October 2023 with a Forbidden Runtz Auto. There will be minor differences during the grow. I enjoy Auto strains simply by what can be achieved in a short time. No matter the strain they will unveil one thing in common, the demand for attention. Many times over it is the anecdotal gardener that surmount plant scientist. Last should I mention, do not forget to stop and enjoy the fruits of your labour...
Likes
4
Share
Likes
22
Share
@RakonGrow
Follow
+ data+charts online rakongrow.lima.zone/growme-purple-haze-auto-014.html Tag 84 : ok, das mit dem abklingen wird so nix lol , da wächst immer noch etwas . Aber hübscher weißer Teppich aus Trichomen . +