Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Had to do the first res change, brought the ppm to 620+/- . This week was recorded on morning number 11. Roots are starting to come out of the net pots in all 3 plants. Looking forward to next week with a new res change to 800ppm. Update. 4/10 Res change to 850 and ph of 6. Day 18. Will do res change around the 28th to a heavy feed for late veg stage of around 950 to 1000. That will bring me into flower for the 2 blue dreams.

Day 78 - pheno 1 was cut down, id normally hang dry the whole plant but decided to do it in branches instead. Second pheno has been left in darkness as i haven't had the time to cut. Pheno one is hung up and drying.. Room Humidity 60/60. As soon as she's dry enough I'll finish trimming her up. Then put them into jars. Might use boveda 60% packs but I'll see. Smells strong! Will post a harvest when both plants have been dried fully an in jars. Hope you enjoy the videos and pictures. Stay tuned.

**I start talking around 1:20 into the video** I had to move the lights further away. I stressed the clone out a little, but we're back to good growth. I think it was good that the original setup didn't work because it made me upgrade the set up. Plant is 19"H x 10"W This grow is legit just an experiment with these lights. https://www.amazon.com/GREENSINDOOR-Lights-Spectrum-Growing-Hydroponic/dp/B08JHQQYFN/ref=sr_1_54?crid=11CFSPTAQ548R&dchild=1&keywords=led+panel+grow+light&qid=1608408067&sprefix=led+panel+gr%2Caps%2C255&sr=8-54

The plan seems to be in pre flowering has not gone into full flowering yet so far it is showing Great Signs creating lots of branches no real smell to it but she's pretty to look at it thank you for reading I will continue to update have a happy grow

viel hat sich nicht mehr getan seit dem letzten eintrag. so richtig bernsteinig wollten die trichome nicht werden obwohl ich den pflanzen zwei wochen mehr zeit als geplant eingeräumt habe. zum trocknen hab ich die nur grob getrimmt. die feinarbeit kommt nach dem trocknen. da im zelt noch die white truffle stehen hängen die freaks erstmal im schrank. die bedingungen zum trocknen sind wetterbedingt gerade sehr schlecht. bei 70% raumluftfeuchtigkeit wird so schnell nix trocknen. vielleicht wird es ja doch noch sommer in den nächsten tagen.

She's looking super beat ful and healthy, getting that perfect bush shape that I'm looking for, let's see what we can do guys! 💚🌱✌️

New week for the imperium X She definitely a week behind the other's but still growing i will be leaving this one alone topping and LST wise it's already smaller then the rest so i let this one just grow how it is Made video today enjoy 🤘🏻 See you next week Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.

Plants are loving their new pots and are drinking a lot - 500 mL each per water, 2x daily, which is enough for some runoff. Had to turn the light down to 75% to maintain lower heat since it gets very hot here in the summer.

Bonjour à tous les padawans et maîtres jedis jour84 arrosage avec 25 centilitres d'eau ph6.3 Jour87 arrosage avec 30 centilitres d'eau ph6.3 Jour88 pratique de la techniques du tronc fendu (videos explicatives) et arrosage avec 20 centilitres d'eau ph6.3 COMMENT FENDRE LES TIGES DE VOTRE PLANT DE CANNABIS Pour fendre les tiges de votre plant de cannabis, il vous faudra : Une lame propre et aiguisée (une lame de cutter fonctionne bien) Un mètre ruban Une ficelle ou un adhésif pour marquer les coupures que vous ferez le long de la tige Un crayon, une baguette ou une brochette pour séparer la tige une fois fendue 1. Tout d'abord, commencez par mesurer la partie de la tige que vous allez fendre. Il faut faire une incision d'environ 10–20 cm juste sous la branche la plus basse de votre plant. Utilisez un ruban adhésif ou de la ficelle pour marquer le début et la fin de l'incision. 2. Ensuite, prenez votre lame et faites une incision en travers de la tige, en commençant par le haut. Attention à faire une coupe propre, jusqu'au centre de la tige. 3. Utilisez votre lame pour tailler en descendant vers le bas, jusqu'à la marque inférieure de la mesure que vous avez prise auparavant. Essayez de tailler aussi droit que possible. Une fois que vous avez atteint votre marque du bas, laissez la lame au centre de la tige, puis utilisez un crayon/baguette/brochette pour ouvrir la partie coupée, puis sortez votre lame. QUEL EST LE MEILLEUR MOMENT POUR FENDRE LES TIGES ? Il existe de nombreuses théories sur le meilleur moment pour passer votre tige au couteau, mais la plupart des cultivateurs suggèrent de le faire à la dernière semaine de floraison. Même si certains cultivateurs recommandent de le faire dans les 3 derniers jours avant la récolte, nous recommandons de le faire un peu plus tôt (7–10 jours avant la récolte). QUELS SONT LES RISQUES À FENDRE LES TIGES ? Fendre les tiges est une technique à stress élevé très agressive que nous ne recommandons qu'aux cultivateurs expérimentés. Nous ne recommandons également pas de fendre les tiges sur les variétés à autofloraison, car cela peut être bien trop intense pour elles. FENDRE LES TIGES, ÇA MARCHE VRAIMENT ? Il existe un solide ensemble de cultivateurs expérimentés qui déclarent que le fait de fendre les tiges peut produire de bons résultats. Malheureusement, peu de données qualitatives le prouvent. Cependant, il semble que la fente des tiges soit originaire des Pays-Bas, où elle est pratiquée par des cultivateurs néerlandais experts depuis les années 1970.

Flowering coming on really well now and things seem to be going ok, one plant stretching a lot faster than the other so hopefully it slows down want these to be a little smaller in size than my previous grow

Día 66 (05/08) Cerrado por vacaciones Día 67 (06/08) Mi amigo viene a casa a hacer un riego con 1 Litro de H2O pH 6,5 Día 68 (07/08) Cerrado por vacaciones Día 69 (08/08) Vuelta de vacaciones! A ver como están después de 5 días sin verlas... 😱 Riego con 1 litro de H2O pH 6,5 Añado 3 cm de sustrato nuevo porque se ha compactado y se ven las raíces! 😢 Día 70 (09/08) Riego 500 ml H2O pH 6,55 Eliminación de algunas ramas bajas Día 71 (10/08) Riego 500 ml H2O pH 6,55 Sesión de fotos semanal! Día 72 (11/08) Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Hash Burger – Zamnesia Seeds | Germination & Early Growth Starting another grow diary with Hash Burger from Zamnesia Seeds. The beginning has been smooth so far, with healthy seedlings establishing themselves well and showing steady early growth. Hash Burger is a feminized photoperiod strain with a 60% Indica / 40% Sativa genetic profile and a moderate cultivation difficulty. The genetics come from Double Burger × Han Solo Hash Plant a combination that suggests a strong hash-forward character. The listed terpene profile includes caryophyllene, limonene and pinene, while the expected aroma brings together citrus and spicy notes with pine, fuel and classic hash nuances. With an expected indoor height of up to 150 cm, Hash Burger can develop into a fairly substantial plant. The flowering period is listed at 9–10 weeks, with reported yields of up to 600 g/m² indoors and 800 g per plant outdoors under suitable conditions. For this grow, I’m using the Zamnesia Ecosystem grow box* including its ventilation system, together with the Zamnesia Phytonaut LED 480W. Nutrition is provided by Zamnesia Vegan Grow At this stage, the focus is on establishing healthy plants and following their structure and development as they move through the vegetative phase. The combination of Double Burger and Han Solo Hash Plant makes the development of the aroma and resin production particularly interesting to follow as the plants mature. **Strain:** Hash Burger **Breeder:** Zamnesia Seeds **Genetics:** Double Burger × Han Solo Hash Plant **Genotype:** 60% Indica / 40% Sativa **Type:** Feminized, photoperiod **Difficulty:** Moderate **Terpenes:** Caryophyllene, Limonene, Pinene **Flowering time:** 9–10 weeks **Indoor height:** up to 150 cm **Outdoor height:** up to 200 cm **Reported THC:** up to 28% **Reported CBD:** 0–1% **Indoor yield:** up to 600 g/m² **Outdoor yield:** up to 800 g/plant **Aroma:** Citrus, spicy, pine, diesel, hash **Reported effects:** Relaxing, euphoric, physical, sedating Grow setup: 🌱 Zamnesia Ecosystem Grow Box 💡 Zamnesia Phytonaut LED – 480W 💨 Integrated ventilation system Zamnesia Vegan Grow All the products used in this grow are available at www.zamnesia.com

Germinación clásica en tupper con papel absorbente, solo agua de ósmosis inversa.. 48 horas y estuvieron listas!

On Monday have her last feed last feed. Only 1/8 tsp buildabloom. 2ml slf-100. 😂😂😂 Sorry you hear me sniffling in the background. I must have been crying at the awe of her beauty 😭🤣😂😅 Wed. Ph water and 3ml slf-100 Runoff ph 6.2 ppm 393 Shes ran so good and smooth. Really enjoy Organic. Friday just plain ph water. All she will het till shes done now. Finish line here we come! 💪. Hope she lets it go 2 weeksish lol

Still giving me a little stretch this week which is fine because there’s still some room. I initially thought they were going to get a bit taller or I might have waited another few days. Either way there’s a TON of cola sites and I’ve selectively removed a few fan leaves blocking them. I turned up the HLG 550v2 to about 90% power and switched the nutes to a higher phosphorus and less nitrogen base. All In all everything is on track.

Week 10 – Day 70 🌱 She’s now finishing the last swelling phase of the buds. From this point on I’m giving only plain water and letting the soil dry well between waterings. The buds are not the biggest I’ve ever grown and it probably won’t be my highest yield per plant, but what really surprised me is how uniform this plant is. The buds are very consistent in size and the whole structure is super compact. In my 1m grow box I think I could easily run 9 plants like this. The canopy would be very even and the space would be used much better. Now I’m just waiting for the final ripening and keeping an eye on the trichomes. Harvest is getting close. Terpene profile & trichomes ✨ The plant is not covered with a very thick layer of resin. In my opinion this might be one of the downsides of running a 24/0 light cycle. From my experience it seems to increase yield but slightly reduce the quality, quantity and size of the trichomes. Because of this I recently changed my light schedule to 23 hours. The central light now turns off a bit earlier while the side lights and the 660nm far-red stay on for a short time to simulate a sunset effect. I think this could be more beneficial for the other plants in the tent. With this plant I will also try to induce a bit of mechanical stress to see if it can stimulate more resin production. I’ll document the results in the next few days. The terpene profile is already very interesting. The aroma clearly reminds me of ginger, with sweet candy-like notes and a touch of lime. Very unique and quite surprising. Big thanks to the breeders at RQS for this little gem. And as always, happy growing to everyone! 🌱

cultivo artesanal y organico

Spring weather rainy and windy, strangely sunny and warm

11/13 Was the last night I kept the dome in the tent, started getting too crowded! But here on 11/15....lol i got bored and wanted to give it some more nutes! 😏 So I made a gallon up of some warm tap water PH'd down to 6.1, 8ml of FoxFarms Big Bloom, 5ml Boomerang, 5ml Wholly Mackerel, and 2ml of Power Si followed up with a very low dosed foliar spray of Xtreme Gardening's CalCarb before it was lights out. 11/17 I did some topping including the main stem. In the video (its off my Instagram story @SoilBGood) there's one that I'm not too happy about, the taller one with the stretched out spacing. But I don't doubt that its gonna give me some dank buds 👊 11/20 The plants are looking sharp....I foliar fed them with some Calmag / Power Si and they blew up over night lol B: Is a shot of the node growth NOTE: I ALWAYS DEFOLIATE EVEN IF I FORGET TO MENTION IT. NOTE NOTE: I swear I smell them already :D