Likes
Comments
Share
@Tio_Shuni
Follow
Un hobby que demanda mucho tiempo, hago lo que puedo con los horarios, espero disfruten este crecimiento de las hermosas presentes. Primera semana de Floración, espero las raíces dejen de crecer, no tengo contemplado hacer un cambio de macetas 😬 Riego cada 2 días, para ser invierno toman mucha agua 2L. por maceta 6.3 ph.
Likes
13
Share
@NanoLeaf
Follow
Very happy with this strain, fast and frosty! Only going to become a better grower by working hard everyday. Extremely pleasing smell and terpene profile.
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
2
Share
Plant is growing well. Probably the prettiest one outta the bunch so far.
Likes
2
Share
@gr3g4l
Follow
Parece que irán sobrados de tricomas, no tengo por que sufrir mucho por esto. El olor a la par que los tricomas, se huele cada vez mejor y se ven más tricomas. Esta semana ya dejaron de crecer como lo hacian y se dedicaron más a engordar los cogollos. Todas las ramas fueron sujetadas a los tutores de manera que no se tuercen cuando engordan los cogollos.
Likes
4
Share
@QixxGrows
Follow
Day15 - Day17: I had some difficulties to get the humidity right. It was either too high or fluctuating too much. I ended up getting a timer for the plug and running the humidifier 15mins every hour. To help with air flow, I have the main duct fan running 4 times a day for an hour. To ensure that there's airflow around the plant, I have a fan in the light as well as a smaller clip-on fan that runs during light hours. I'm not sure how the camera moved on day17... I only watered it mid-day. Day18: The timer on the humidifier and Duct Fan is now keeping the humidity in a good space. VPD now under control Day19: The Vivosun controller perfectly adapted the lighting schedule to an hour earlier, to ensure 6hrs of darkness. UInfortunately the RPi kept it's 04:00 schedule (makes sense). So I captured an hour of darkness. Adapted everything. Will have 18hrs again from Day20 onwards. Day20: In the next days I'll lift the camera higher for a better view of what's happening up top. My mesh-netting-dingsbums will arrive and I'll use this as a platform for the pi+camera. Day21: I'm not sure if I like this angle. I'll only keep it like this until she goes into veg-mode. It at least shows the new nodes growing from different perspective
Likes
32
Share
@Chucky324
Follow
Hello. After I took the video I flushed the plants and had back flow into the 15 gallon barrel. Measured the ph and it was 6.2 Good enough. Just checked my calendar where I've written my info for years, (grow diaries is new to me) I saw this is almost the end of week 7 for me (Thursday was the first 12/12 and then I count from there) With the tents help I started flowering on May 28. I'll start my flush (with 1 ounce of Hydrogen Peroxide to 5 gallons of water) after 8 weeks and harvest after 2 weeks of flush. I'll give it some dark days only if it's wet and rainy, a black tent in a greenhouse gets too hot. I've found some more powdery mildew this week. I 've bought a product called White Wash. It's frequency changed water. Knocks it right out. We need some hot days here to kill the spores. In the video you'll see the plants (girls) that have volunteered to have sex with the male Dr Atomic Northern Lights I have under my lights, 20/4 that i start my vegetables under in the early spring. The girls and the male will be put in my smaller greenhouse around August 1 and will be put back in this greenhouse to finish to seeds. I'll keep you informed. Talk to ya later. Chuck.
Likes
40
Share
Well the suns been out the last few days and the girls are loving it. I think I’ll start flush although it’s a little early for some others are ready. So a one or two week flush and then we are done. After that I’ll chop as each one is ready.
Processing
Likes
13
Share
@GrowGuy97
Follow
Flower day 31 - Having a little trouble with the temperature getting higher than I would like because my dehumidifier puts off some heat while it’s running so it’s been a constant struggle to keep the environment in this tent stable! Definitely will not have so many plants next run lol, but all in all the ladies are growing great & I can’t wait to see how they turn out! Thanks for following friends & happy growing!✌️🏼🌱 Flower day 33 - Fed half the plants today with PH at 6.4 to try and keep the humidity down some I’ll water the other half tomorrow!
Likes
15
Share
@NyBushDr
Follow
Good morning, weekly update time! Today is day 41 of flower, the fade has started but the ladies are still bulking up and putting on weight! Prob start checking trichs in ten -14 days or so but like I said weight is stil increasing and white pistils are still dominant. Last week they got their last dose of recharge tea, I’ll probably give them fish shit one more week! I also gave them one last fruit compost tea I made with apple, cucumber, kiwi, and banana peels! Here on out there isn’t much to do and it’s getting boring for me, I liked working with them topping and training etc but now I just check on them once a day. Thanks for reading and see you next Tuesday :)
Likes
34
Share
@RFarm21
Follow
Olá growmies! Parece ter uma ligeiro excesso de nitrogênio e não parece estar tão feliz como as outras, mesmo sendo a que está a crescer mais. 17 novembro: regada com 0.5L só de água, pH 6.5. - Passado poucas horas ficou mais feliz, aparentemente ehehe Boa semana a todos.
Likes
12
Share
3/9 - I was unable to feed with nutrients as I just gave water on 3/6. I was letting my pot dry out before feeding. I also think I was letting my pot dry out too much was my issue. I am not exactly sure and fingering the soil does not seem to be working for me. I purchased a VIVOSUN Soil Tester, 3-in-1 Plant Moisture Meter Light and PH Tester. 3/10 - I checked my soul moisture and it was getting dry so I decided to feed with 330 of my nutrients along with a pinch of Epsom salt to help with my mag levels. If i am still seeing my leaves yellowing and the new feeding schedule does not fix my issue I will add some cal mag to the feed. I gave about half a gallon of feed water and slowly gave it to the plant. I think I spent around 10-20 minutes just slowly syringe feeding. After an hour of so I still have no run off. I did happen to get feed water on a few leaves but they are hanging lower in the canopy and close to the soil. I think I might prune them off sometime this week or next week. My 2 tops are finally growing in. I think they were delayed due to watering issues. I think I may have stunted the plant but am not sure. 3/13 Watered a gallon of water with Mosquito Bits as I had started to see gnats. Most of the gnats were from my Hibiscus plants that were inside the tent as well. I have removed them and placed them outside. So far I am not seeing gnat on my cannabis plant.
Likes
9
Share
@Mo_Powers
Follow
not much happened this week. there was a lot of sunshine. a few stormy days and some rain. she is still doing well and is growing steadily and the flowers are getting thicker. she is now also getting biobizz top-max
Likes
23
Share
@Canadian
Follow
Day 50 the plant has been growing at an incredible speed and has a very very large flowering stretch in fact I only have left 5 inches to raise up my light and then I'm going to have to do something to keep an eye on those branches so they don't stretch anymore or at least they can have enough light to proper development. From all the plants I have grow indoors this one is the only one that has make my light stretched to the top of the tent I guess it's a good problem to have. Other than the incredible stretch the plan seems to be healthy and doing pretty well the flower is development and I'm looking forward to see how this is going to turn out. Day 52 I have rise my light to the top as high as I can and she still grow past the light towards the exhaust system I had to tie her down in order to create an arch and in that way make her receive enough light instead of growing over the top of the light where there is actually no sufficient light if this problem persist I will have no choice but to do super cropping on the tallest branches and see how they react to that I decide to take some cuttings I'm trying to clone this one to see if I can get her outside in the summer in another buddy house and see how she reacts to challenging Ontario weather. Day 53 I have to Super crop several branches Unfortunately they were growing straight into the light becoming burned by the intense light I hope the plant doesn't react to bad to HST and still deliver awesome buds thank you for reading I will continue to update have a happy grow.
Likes
101
Share
Week 7 here we go They starting to show some colors as they are getting frostier and frostier 😇 tricomes still all very young and clear but getting there 🤫😈 Day 46 update : selective defoliation, they needed more air and light going around. It smells like candy’s store mixed with pine trees and the minty fruit salad that as all that exotic and exquisite aroma in it I’m loving this round and loving all the new learning that came with it 🙏❤️😈🤫🤓😇 As for the geek department 🤓 I’m currently: - VPD - 1.03 kPa -PPFD - 725.38 umol/s/m2 -DLI - 28.71 Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 75% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D
Likes
14
Share
Week 10 - 1/3 -1/10 1/4 - update - not sure what to do next. my feeding schedule only has 10 weeks of feed so i might flush with water for last 2 weeks until it is ready to go? **i think the deficiencies are either Maganese or something im not sure .... i think i should add some cal mag to my feed but i didnt want to go "rambo" mode just yet with this being my first grow i wanted to stick to the gameplan. going forward i might cowboy up a little more because i didnt realize that the food chart was more of a guide and then depending on what the plant tells you - you adjust appropriately... but whatever live and learn . PPMS havent really gone over 500 during the whole grow either so i think i got some room to work with.... people said they use 3ML of CalMag the entire flower stage. flower ppm should be 1000 and veg between 600 and 800 .... ill try that moving forward
Likes
55
Share
@valiotoro
Follow
Week 13!🤓 I get the fever every time you cross my mind😳 2 weeks now that she s under the FC1000 EVO @ 100% without any sign of foxtail,nanners or light stress!!!without CO2 or Exhale bags or idk what…it’s a beast🤩 I don’t have a PPFD meter or the app on my phone but it should be around 1000-1400 umol/m2!LOL I don’t have any secret ingredient the key is to have a good ventilation and a super healthy plant! Don’t do that if your plant is not healthy or she will burn for sure!🤓 Take care💚