Week 2 Needed to pop more seeds. I will make the count next week and see which phenotypes are the best to select to grow. Some batch of seeds didn’t sprout at all, i.e: AK. Super Skunk only 1/3. Spliff Strawberry sprouted after 1 week in cotton when I was about to give up counting on them.... this is why it’s always better to pop more seeds than expected to grow ! This isn’t the best start, but things shall go back to normal in a couple of weeks. The fan is on speed 1 and not blowing directly on the seedlings. The Mars-Hydro LED is definitely an excellent light for growing Cannabis when you keep it at the right distance. Cellmax BIO soil is perfect, no need to start in plugs you can directly put the germinated seeds in the soil without being worried about the nutrients and the EC/mS. Let’s see next week how it goes. (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)

1st Harvest: 45g 2nd Harvest: 6.29g 3rd Harvest: 62g Total: 113.29g It was a small grow, but I’m happy it yielded more than I expected. Maybe the staggered harvest helped. Right now, I’m curing in mason jars with Boveda packs. I can’t wait until it’s ready to smoke!

Está semana regamos ligeramente con agua dos días y el sábado 12 empezamos a hacer el té para echarselo lunes de madrugada

63 days!!!!! Today I gave my girl just clean 6.3ph water without any food, I think she has less than 2 weeks left until the finish, my tent smells amazing :) good luck to everyone :)

This week is amazing they have took a growth rate 📈 unbelievable how much they have grown I find myself sitting back here for hours at a time just enjoying life happy growing everyone caring growing loving life

D1 Start into week 14 could be her last week depending on how fast the look of trichomes develops in the next days. she still feels a bit shy and afraid of getting cut, but i take it slowly but surely D7 Will give her one more week for more amber trichomes but in general she feels ready and the switch to the new fertilizer in between made her get back some more saturated green. Let’s go can’t wait to finally harvest her.

On day 1 I did another light defoliation. The plants are progressing as expected. The only issue I'm dealing with is fungus gnats... ugh. I will keep applying BTI weekly until the population is under control. On day 3 the plants are putting out more pistils and seem to have stopped or slowed down their "stretch" phase. On day 4 I'm starting to see some trichomes forming on the sugar leaves, no smell that I can discern yet. I also changed out my reservoir and applied a BTI soil drench. On day 5 I adjusted the PH of my reservoir down to 6.1. I also purged my blumat system to make sure there are no clogs as my reservoir has fertilizer particles due to my water heater causing separation. I must keep the water heater on as I am growing in the northeast coming into the cold time of the year and can't have my reservoir freeze on me. On day 6 I adjusted the PH of my reservoir down to 6.1. On day 7 I adjusted PH in reservoir to 6.1.

09/12/2018 Purple tip cutting seems to be taking .#1 is filling out well lots of fresh flowers stacking up nicely.#2,#3,#4 all doing well👍hope they finish up in 4weeks🙏 No feeding this week just molasses for soil microbes, 09/17/2019 Did some defoiliating and green tie 's to spread out lower branches on #1 . she is a beast. Seeing, some differences between #2,#3,#4 .#4 being darker green, #3 is paler green #2 not as pale, #1 lighter green but not pale at all. Given deep soaking today, and I noticed phase 3 flowering is starting!🙏 should start stacking them fat buds for next couple of weeks hope she done at 10 weeks fingers crossed.

So. Couple things happend and i choped them a bit earlier than colours would say or i would want, but ; I touched one bud , squeezed it ;))) and after 3 days it was budrot, so i panicked ( so much , that even forgot to take pictures) and turned off lights for 3 days . Second thing my last photo will show - i decided to reveg best plants and didnt want to flush out them totaly ... First two smalest plant produced : Leafy no bottom trim - 66 grams, but they where mostly airy Two round defoliated weakest one - 60 g of lovely small nugs . Tasted both same, maybe leafie one had more smell at begining... Both on cure still... Now always leaf strip before flower, around week 3 and 6 of flower and bottom strip. Hated that time while i was playing with trim on those 1/5 of popcorn bud sometimes ;))) P.s. while choping forgot to take photos one of the niciest girls ;)

This strain has been an absolute pleasure to grow. I'd say they where the perfect size for indoor grows as they stacked amazing. Not requiring special treatment and pretty much took everything I threw at it. All in all highly recommended for all levels of growers.

weeks 7 and I had to put a Scrogg net in. the weight of the buds is pulling down the plant Yō Yos so I went with a net, looks like they are responding to the feeding. just water today and maybe tomorrow they're thirsty

Weirdly enough her side branches have the fullest buds and most white pistils (gonna post better pictures soon)

Shout outs to MiyaguiOkPolilla for the lateral training tip, as you guys can see, we have bent them and hopefully this will double our flower power, lets see what happens growers!

During the first week of growth, The Scrooge faced less-than-ideal conditions due to low humidity levels. Despite this challenge, the strain displayed resilience, with new growth emerging. While the environment wasn't optimal, The Scrooge showcased its genetic potential, hinting at promising development ahead.

Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 There has been much change this week!! First there was a big defoliation done, I cleaned the bottom of the plant. All the growth that wouldn't amount to anything because the light doesn't penetrate that low. Also took off the biggest fan leaves to give more room for light. Then finally switched to 12/12.. After just 36 hours after the defoliation there was a major change. New growth everywhere, colas started stretching upwards fast. It's like she already knows it's flowering time. Great reaction to the defoliation and 12/12 switch. I'm still watering every other day, After the defoliation I watered with only Enzymes 2ml/L to clean the roots a bit then started with the nutrientes again. I dropped the amount of grow nutrients from 3ml/L to 1ml/L and started adding bloom nutrientes 2ml/L for now. I'll slowly be upping the bloom nutrientes and after week 2 I'll no longer add grow nutrients. That's it for this week. Stay tuned to see how she flowers. Stay safe!

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

Week 22 (11-11 to 17-11) 11-11 Temps: 19.1 to 26.5 degrees Humidity: 43% to 62% Watering: Both 500 ml. This is the last week, so i only water without nutrients. I will check the trichomes in a couple of days. 12-11 Temps: 18.8 to 25.8 degrees Humidity: 42% to 62% 13-11 Temps: 18.1 to 25.8 degrees Humidity: 46% to 62% Watering #1: 600 ml. #2: 500 ml. Dry Weight #1: 3.4 kg. #2: 3.5 kg. 14-11 Temps: 19 to 25.5 degrees Humidity: 46% to 64% Today i checked the plants under a microscope. I see a lot of milky and some amber trichomes, at the end of the week she is ready to be dried! Dry Weight: Both 3.7 kg. 15-11 Temps: 19.2 to 25.8 degrees Humidity: 44% to 60% Watering: Both 500 ml. Dry Weight: Both 3.9 kg. 16-11 Temps: 19.6 to 25.5 degrees Humidity: 42% to 55% Today i removed mostly all of the dead and yellow leaves. 17-11 Temps: 18.9 to 25.1 degrees Humidity: 48% to 61% At the end of the day i harvested both White Widow plants, she is now ready for the dry process! Dry Weight: Both 3.4 kg.

Week 12 comes with no issues. Humidity dropped to 35-45% and temps increased a couple degrees both during the light and dark period due to weather change. Feed remained the same. Autoflower plant is harvested so they got a little more space in the tent now.

FBT1 did not like being transplanted at all ! i guess being overwatered stressed her out some, good thing it's early in a way, hopefully she wont be permanently slower 🙏 lol , anyway she's basically healthy now, although last time i watered her it was tuesday last week and now it's friday, medium is still wet though, so no water for her until she dries out some more. Realised i hadnt been spraying my kelp carefully enough the week before so i'm spraying the soil with amino to try to keep pH basically fine until i can water with cal mag and hopefully some co2 enriched water. I pHed down the spray with 0.1g of GHE dry pH down powder to 6.0... rain water is pH 5.5 so i'm okay i think. anyway fbt1 in mrB's so easy i didnt even have to water this week lol. check out the videos, let me know ! 🚀