I ended up running these plants a total of 60 days. Topped each plant 2-3 times. Once flipped to flower the plant does not stretch much. The final product is dense, sticky, frosty buds with a fruit punch and piney gas aroma. Yield for this pheno is above average, but I highly recommend trying to get a top in every trellis hole to get maximum yield. Overall I pulled a little over 3lbs off of 16 plants. Notes: Room size: I'm not sure what to put as grow room size below... room was 8x8x6.7 Gram per watt: Gram per watt per plant doesn't seem to be the best measure in my opinion as it would encourage you to grow fewer plants with longer veg times to get the same yield. Unless I'm missing something? The actual power draw from the wall for each light is = 355watts per 315 LEC x 4 = 1420 watts in Flower. The yield was 1380 grams which makes the total Gram/Watt ration = 0.9718 ***Sorry for the shitty pics... my phone camera is still shit right now and these are all the pics I could get at the moment.

Just getting huge , and huger , lol , keep a close eye on the EC and ph , I’ll change reservoir today or tomorrow changed buckets today, 2/5/19 added a couple of pics in the dark.. also one thing ive noticed, if you try and play video it doesnt work, but if you go forward to next pic, then back again with the arrows on the side, it works!!! on my ipad anyway.

In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎

In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎

Very fucking nice job the thc on the Russian strains is out of this world the smell of the White Russian OG and plant structure is amazing. The Power Russian is phenomenal! Boy Scout Cookies the smell of this plant is crazy can't even explain it. I will surely run some strains again when I chop. These plants are at about 40% of there potential. I will run them properly with some new products I have now

I ended up running these plants a total of 60 days. Topped each plant 2-3 times. Once flipped to flower the plant does not stretch much. The final product is dense, sticky, frosty buds with a fruit punch and piney gas aroma. Yield for this pheno is above average, but I highly recommend trying to get a top in every trellis hole to get maximum yield. Overall I pulled a little over 3lbs off of 16 plants. Notes: Room size: I'm not sure what to put as grow room size below... room was 8x8x6.7 Gram per watt: Gram per watt per plant doesn't seem to be the best measure in my opinion as it would encourage you to grow fewer plants with longer veg times to get the same yield. Unless I'm missing something? The actual power draw from the wall for each light is = 355watts per 315 LEC x 4 = 1420 watts in Flower. The yield was 1380 grams which makes the total Gram/Watt ration = 0.9718 ***Sorry for the shitty pics... my phone camera is still shit right now and these are all the pics I could get at the moment.

Had a great run with this grow. I learned ALOT about DWC, growing and myself. I think it would have been infinetly more successful if I would have just stuck to the feeding chart, and stopped "fixing things till they broke", but a great learning lesson and I am excited for my next grow.

This plant grew very well. I yielded 7 ounces from just one plant, too bad I killed her sister. Honestly the only trouble I ran into, were the problems I created for myself. I am super excited to take everything I learned from this grow and apply it to my next!~

Well kind of a shitty week. The weather has been garbage, it snowed twice... yeah snowed. There is not a whole lot of growth to report on due to the weather. The Grand Daddy Purple has a lot of space between it's nodes this week, to what I can only attribute to the poor lighting with it being over casted, cold and snowing all week. The other 2 photo's are doing just as well as you can see, again not a whole lot of growth after the topping, but I'm assuming the environment for them has not been as favorable as needed, so they are just focusing all their energy on not dying. Which I'm totally cool with lol. The mephisto's are growing well, I'm still training them around the pot trying to get more tops out of them. The ChemDawg is doing significantly better than the Sweet N Sour, I haven't had to do hardly any watering this week as the soil is still damp, temps are cold and humidity is high. I did water and feed them today though as we are expecting temps and weather to reach mid 70 s this week. The Girl Scout Cookies is still in her seedling phase, not sure why this strain is giving me so much trouble, but she's not dead, and first true leaves are just starting to poke out, I've got her in the indoor tent with my Auto grow soaking up some light and hoping that gets her hardy enough to bring her outdoors.

4/30/19 start of a new week, las feeding was today, it’s flush time. I’ll probably chop her down around 70 days or a few more. 5/3/19 Watered with clean water. Trichomes are probably 50/50 clear/cloudy. It’s hard af to get a decent look with what I have I need a good recommendation. 5/6/19 Snagged a decent jewelers loupe hence the close up pictures. Watered with clean water. End of the week! One more to go!

In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎

Well once again I’m blown away with the genetics from Fastbuds. I only wish I had more room for them to really grow. I’m growing Fastbuds Smoothie outside and hoping that’s going to thrive in lots of space. Anyway the Cali Snow is smelling divine and really stacking up nicely. The grapefruit continues to fatten up and smells just like over ripe grapefruit. Very acidic almost gassy. The grapefruit is a lot small so yield might be down but quality over quantity win some for me. 👊✌️🏻💚

Well once again I’m blown away with the genetics from Fastbuds. I only wish I had more room for them to really grow. I’m growing Fastbuds Smoothie outside and hoping that’s going to thrive in lots of space. Anyway the Cali Snow is smelling divine and really stacking up nicely. The grapefruit continues to fatten up and smells just like over ripe grapefruit. Very acidic almost gassy. The grapefruit is a lot small so yield might be down but quality over quantity win some for me. 👊✌️🏻💚

In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎

Week 3 of flowering and its smelling really nice in there and they’re definitely packing on weight and resin now, overall happy with my progress and both phenos of the Peyote Critical so far, no sign of nute burn or bug infestation/ mould or mildew so everything is going great :) However my oscillating fan died as I don’t have pot tray for the lsd and gave them a big drink and she drained out everywhere in the bottom of the tent and destroyed the fan haha, oh well. LSD still not looking as good as both the Peyote but hey, it might surprise me. Until next Week! Start giving them pk this week so now the real fun begins....

Dies ist die letzte Woche der Vegetation. Ich habe zu Beginn noch einmal etwas defoliert und werde es nun die ganze Woche wachsen lassen. Der Triebwuchs ist sehr schön und es wird einen Haufen Spitzen geben.

started LST, 2/4 plants preflowering, noticing weird twisting growth and trying to address it. Moved lights up a bit to 60/100/100 RBW at 36 inches.

Not sure what more I can say that I didn’t say above. Patience, patience,patience! Veg longer with LED because they won’t stretch as much as you anticipate. They are very forgiving to a point and my nutes were organic until the end when I used kool bloom!to increase yield and made them a little unhappy. Cheers to dinafem for the best of the best when it comes to genetics!00

Day 28 - Full watering/feed to run-off 10%-20% at same strength as previous. (50% of maker recommended strength for coco use + cmx + root enhancer + kept extract organic additive) Day 31 - Decided lower lights by around 30cm 120cm to about 90cm. After about 8 hours the plants all suddenty wilted. They stay wilted through the night cycle as well, so I raised the lights back to where they were and they have bounced back, so I won't suddenly drop the lights by as much. If I do lower them it will be incremental. Day 32 - Bought a six fin 800w oil heater for the tent. Am going to place this under the oscillating fan and set it aiming to keep the tent around the 25-27c range. Hopefully this has the tent sorted for the rest of the grow. The humidity has been high lately due to the weather, so this might be about the only factor left to address, and I will look at getting a dehumidifier for the grow room if needed. Day 33 - Full watering to run-off 10%-20% at same strength as previous. (50% of maker recommended strength for coco use + cmx + root enhancer + kept extract organic additive) - Ordered humidity controller for extractor fan. - Ordered Temperature controller for Heater - Ordered IP Camera for remote monitoring Tent is now running fully sealed and using passive inlet and carbon filtered extraction to roof space. Plants are around 20-40cm high and the lights are 85cm above the canopy on full 480w. Day 33 - I have reduced the Light intensity from 480w to 420w. This seemed to really get a good response from the plants. I think as they've grown taller and the light intensity has quietly increased at the newly heightened canopy level the plants have been getting stressed. Day 34 - I've reduced then light intensity from 420w to 280w. I am new to the quantum boards and the concept of "too much light" so working out how much intensity, how much distance and so forth for the different stages of plants growth. I have a gut feeling 280w at 80cm might be a touch under-powered but I'll give it a full light-cycle or two to judge leaf growth and colour and make a call on whether or not to increase it or leave it as is. Day 35 - I found plants wilting during hthe night cycle without fan air circulation. So I've set the oscillating fan to run during night hours. Day 35 - I've turned up the heater a touch to bring the tent temp to around 26c. Infrared gun shows leaf temps to be around 24-25c which ideally I want to get to 27-29c - I'll aim for this metric once the other environmental factors are sorted (ventilation seems sorted so mainly just dialing in the light intensity). * I'm looking forward to setting up the heater on temperature controller, and putting the carbon filter ventilation on humidity control, and then mounting an IP camera in the tent. This should all be here in around 2 weeks. I'm looking forward to being able to view the temp/humidity and see the plants live without having to actually open the grow room. * The infrared temp gun is proving invaluable in testing leaf, coco and pot temperatures around the tent, which is giving a great view of how the heat from the heater/fan arrangement is being distributed - it shows a less than 1-2c degree variance across the tent which is just great. * Hopefully week 6 to come will be one with a lot less wilting incidents and the week that this tent achieves a somewhat final and stable environment optimised for plant growth and happiness. But so far every time I think I've got things perfected, another variable comes into play and I need to tweak something. Maybe by the end of this harvest I will have the whole process refined to a smoother less reactionary process.