Plant was very hardy and stiff buds thick and dense. I'll update in a few days upon dry. We Did It... Let's groW some mo...

Harvest week for atleast the BG’s. The motor breath looks like it could go a couple more weeks but won’t have the time so….. we rollin with it!

I finally turned 600 watts on, would love to get comments from you folks, so clueless here. If you see something wrong, please let me know.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

She’s budding up nicely finally done stretching and starting to smell strong

Last week of Ozz! I’m getting some nice trichromes. Surprisingly, she doesn’t smell much, but she’s still beautiful. She also has the best ratio of buds to leaves out of the three plants of the same strain. I’ll start trimming Dorel by Friday and #4 this weekend to free some space. Then it’ll be Ozz’s turn on Sunday or Monday. The relative humidity levels are getting dangerously high, but the temperatures are still fine until next week. Since she’s covered, I have good hopes she’ll hold. No additional bud has rotted since two weeks ago :))

Girls feel fine

All went good this week ,she starting to pack up some weight now ,quite tall so far ,this week ive up the feed to 900ppm so watch this space ,i think i have finished with defoliation too as i have a dehumidifier in the tent now to keep steady 45-50% humidity

Week 12 - Flower Week 7 12. of Feb. Day 78 - Flower Day 43 Reservoir steady in the mid-1.6 EC range. pH behaving normally after corrections. Drinking roughly around a liter per 24h. The tops are mostly orange. Very few white pistils up top. That’s what’s dominating my attention. It feels early for them to look this mature. I start questioning whether the late-January catastrophe pushed her into finishing prematurely. Trichomes look mostly clear on closer inspection - not milky like I first thought. That’s important. 13. of Feb Day 79 - Flower Day 44 Pre top-off EC dips slightly - small sign of uptake. pH stable in the mid-5s after correction. Still fixated on the topmost crowns. They look static. I compare pictures from a week earlier and struggle to see obvious swelling. That’s frustrating. 14th of Feb Day 80 - Flower Day 45 Numbers stable again. EC mid-1.6s, pH mid-5.8s after top-off. Drinking steady but not aggressive. I consider whether development has stalled. Buds look healthy, not deteriorating - but not exploding either. 15th of Feb Day 81 - Flower Day 46 The mental tension is still there. Considered drastic action (flush), but decided against it after reviewing the data. Numbers weren’t extreme. Plant wasn’t collapsing. Chose stability instead of panic. EC held in the mid-1.6 range. pH stable. Drinking continued. EC trends stable. pH predictable. Roots healthy. No worsening damage. 16th of Feb Day 82 - Flower Day 47 00:15 pre top-off: pH 5.5 EC 1484 She drank just over a liter. After top-off: pH ~5.8 EC mid-1.6 This is the first real shift in perspective. I notice that underneath the canopy, popcorn buds and mid-level sites still have completely white pistils. That’s a crucial observation. If she were truly finishing early, those would not be fresh and white. This doesn’t look like shutdown. It looks uneven maturity between canopy layers. 17th of Feb Day 83 - Flower Day 48 00:10 pre top-off: pH 5.73 EC 1564 After circulation: pH 5.75 EC 1620 EC meter seems to show too low values at first. Drinking 1L again. This is the day I actually see bulking happening. Not on the very tip of the highest tops - but right below them. The secondary crowns are stacking visibly. Calyxes swelling. Structure thickening. I realize I’ve been staring at the most stressed tissue (the very tops affected by the earlier light/EC incident) instead of looking at the plant as a whole. 18th of Feb Day 84 - Flower Day 49 Pre top-off: pH 5.92 EC ~1.6-1.7 (meter slightly inconsistent but trend stable) After top-off: pH 5.87 EC 1620 She drinks over a liter again. The brown pistils on the very top now feel less like “premature finish” and more like scars from the January event. Lower pistils remain white. Calyxes are not collapsing. Bud density is slowly improving. This week ends in a different place than it began. Not explosive. Not perfect. But alive, feeding, stacking - and very much still in flower. Next week should hopefully be all about stability and bulking.

Semana 9. Día 98(11/10): Para esta semana la saque al sol ya que no tenia luz, probablemente ya la semana que entra va a dormir afuera 3 o 4 días.

Growing very well. Just add water. Very easy. The leaves look nice even not too dark green. Did some more defoliation on bottom third of plant. Buds starting to fill in. This lady looks much better than the one on liquid organics

9/10: Coming along nicely...the big Amnesiac is the biggest seedling in the garden. 9/11: I waited to long to transplant them and they have root problems to some degree or another...too wet for too long. I transplanted all but the smaller Amnesiac and Lemon Cream Kush into 3 gallon pots, and those two went into 2.30 gallon pots. About 50% brownish roots on all but the smaller ones. 😕 I powdered the planting holes with myco, tricho, and other goodness. I added two Mars Hydro 150w lights, and a 60w 6500k LED panel light since they are all spread out now. The average CCT is still a little over 4800k, even though the Mars are a little warmer color temp than the Viparspectras. 9/12: Between the root problems and the transplant, they looked horrible, so I sprayed them with BoomBoom Spray today and will do a good root drench tomorrow with BushDoctor Boomerang. They looked better by the end of day, but still have a ways to go to get back on track. 9/17: I fed them boomerang only twice this week, and also fed them kangaroots yesterday. They are all looking strong, and branching well. The big Amnesiac is impressive. Great structure and amazing vigor. The LCK is finally starting to look like she belongs in the same crop. I'll prolly flip to 13/11 with emerson effect in the next couple of days.

Hello my friends 👨‍🌾👩‍🌾🔥🔥, I'm still in GD Jail, since more than 1 week, so can't reply you my friends, hope will be solved asap. 4th week of blooming 🌲🌲, Buds continue to grow up and start to fat, they look frosty ❄️❄️ and sticky. Smel look sweet/candy, start to have a nice smeel when I open the box. I didn't yet make a 2nd treatment because plants will be ready probably in around 4 or 5 week, so I preferred wait to make the 2nd and last treatment, in few days🥊🥊🤞🤞 Except this issue with thrips, plants look happy and healthy, I love the see of the canope 😍😍🦔🦔🦍🦍❄️❄️ 💦I've given 1.8 l/plant 2 times. Start week, Mid week, today 1x water + terra flores + boost 1x water + cannazym + sugar royal PH@6 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Also to @marshydrococo2 , @News_SweetSeeds for sponsoring 💕💕. Mars Hydro TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light If you want a litle discount on your Mars Hydro order, you can use the coupon Ju_Bps Gorilla Girl F1 fast version https://sweetseeds.es/en/photoperiod-dependent-seeds/3065-gorilla-girl-f1-fast-version.html See you next week my friends Have a good week end 😁💕

Sometimes it may be good, sometimes it may be shit. When you don't care for your plants it do be shit. Let this be a lesson for the future and also for those who think growing its just placing a seed in the ground, if you don't care for it, you get weed but not the highest grade. Altho i must say all of the auto's from this round were pretty good at smoking with the exception of one that tasted like a fart in a jar lost in the ocean for a decade, that meanwhile was eaten and shat by a whale, not good, but the others were pretty good, enjoyable to say the least.

Day fifty, they're all looking pretty good.I'm doing a ph check every couple days Halfway through this week I noticed the banana purple punch and do you blotter?Culture was looking a little stress.A lot of her leaves were clawing and it wasn't lack of nutrients or being in the wrong p.H. i believe I either added way too many microbes or had an imbalanced liquid.Solution and so my troubleshoot was to clean the buckets, replace the water and let these plants sit in plain water for the day over at night.And tomorrow I will dose the nutrients, and we will see tomorrow.The final update and monday will be week nine.

Regué el Lunes con Vampimelaza y bokashi de flora dw Vamp. (25 ML) Y una tapa de bokashi. También utilicé de enmienda en Vampkashi y las micorrizas de Namasté. Hice una defoliación nueva y saque todas las hojas que tapaban los cogollos principales. La Blue auto mazar está poniéndose cada vez más maciza.

Day 77 The plant is deep into late flowering now, and the buds are clearly maturing. Trichome coverage has noticeably increased-most are cloudy, with only a few remaining clear. Pistils are starting to darken and curl inward, although there are still some fresh light-colored hairs emerging. The aroma has intensified, becoming richer and more pungent when the lights warm up. The leaves show a slight fade, mostly around the edges, which is normal at this stage as the plant reallocates energy toward bud development. No signs of stress or significant nutrient issues, Humidity and airflow remain stable to prevent mold since the buds are now dense and sticky Section Fully Updatet.

Tras acabar la segunda semana de floración así se presentan las pequeñas. Hemos ido defoliando alguna hoja de la parte baja de la planta, aireando un poco a las niñas por la zona baja . Las plantas ya empiezan a mostrar sus primeras bolitas y empezamos a añadir en la solución top Candy y pk13-14 para ver engordar esas bolitas💚.