Coming along Very nicely and i already harvested one blueberry 1 week too early but still a very strong smoke and pretty aggressive to the throat. Amasing strain from AMS every seed were pretty amasing one standing out tho and its very frosty.

26.09.21. У Халка очередная неделя прошла отлично, начал растягивать боковые ветви, в дальнейшем будет Top макцшки или Fim подрезка, не решил. На выходе показывает небольшое завышение ppm и снижение ph, что говорит о том, что девчонка перевела и надо бы полить водичкой с минимальным количеством удобрения. Всем удачи, жду в гости, пишите комментарии друзья, лайк это здорово, но мнение человека неоценимо👍🏿👍🏿👍🏿🌱 28.09.21 немного потренировал Халкушу, главный стебель как из железа, толстый и не тянется, через пару дней топну макушку. 30.09.21 мне очень нравится развитие Халка, потенциал у растения очень серьёзный, о чем говорит размеры листьев и толщина ствола.

No issues this week. Not much progress either. Lol

####Please do read the disclaimer in the first entry! 01/28/25 Short facts: - VPD @ 1.0 but normaly it doesn't get better than 0.9 - Light @80% so most leaves are exposed to 500 - 960 ppfd - Success with the colloidal silver --------------------------------------------------------------------------------- Finally, the attempts to spray her with colloidal silver were successful. Many pollen sacs are developing, and I hope they will be ready within a week. Buying a new spray was the right decision because, with the new one, it took less than two weeks for the pollen sacs to appear. However, the leaves are looking worse now—some are almost 70% dead. I still hope she will make it so the seeds can fully develop. I planted the Lemon Cherry Cookies much earlier than the other two plants to avoid pollinating Slurricane and 1:Walt. However, due to the delay, both are already in flower, so they will end up with some seeds. Maybe one of the crosses will turn out to be something special! 😂

week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.

Looks like buds r going slow super cheese is on track nice rop colas

Working towards germinating 4 autos. Hopefully all seeds will successfully take. Seeds will soak for a day or so and then into directly amended soil in fabric pots.

Day 29 and starting off Week 4 awesome even with my big mistake and not knowing that on mainlining you top first time at third node but the second toppings you can do at first with enough growth but in waited till 3rd on both new mains.. o well you live and learn but hey she looks like shes doing fine atleast will have some nice buds Day 32 update: Now that I have the fungus gnats under control everything has been perfect.. used Foxfarm SledgeHammer to water her to flush all that extra leftover salts in the soil out from the grow nutes, because will be switching to my bloom nutes on next watering, and she seems to have liked it.

12/15: Some plants are taking too long to transition and stretching beyond my space constraints, so I dialed the photoperiod back to 12/12. 12/16: Fed today and rotated edge plants. Added another 150w of 3000k below the canopy. 12/17: Worked on ventilation...no A/C necessary now, as I'm using another AC Infinity 6" fan to intake outdoor air into the closet whenever temps reach 75f..and it's been cold as hell outside.👍 The final trick will be to replace the 6" exhaust fan with an 8" so as to be able to fully exchange the closet air faster ...but that's gonna have to wait til next season.

Today we start week 8 from seed 🤙🏽 She's fattin up those buds and I am courious how she'll end Up until Harvest. Stay tuned 🤙🏽

Great Strain, like always from Barney! 🌱

I learned a bunch growing these plants and the harvest was well worth the effort it took. 300 watt actual power consumption for lights so I think I'll give this strain another run in the future. The smoke is smooth the smell is potent fruity with a touch of citrus. I dried to 67% then placed buds in a plastic bin for one week burping 4 times a day for 15 minutes then Jared at a humidity of 63% with 62% bóveda packs for one week burping twice a day . After 10 days of I exchanged the 62% packs for 58% packs. Burns smooth and tastes great but I'm going to see what it tastes like in a couple more weeks.

This week has been such a great week, as you can see compared to last week they have shot up and really spreaded out! Finally rained a good bit last night so put some feed on them and this rain will have washed it into them. Next few days need to get down and put some netting over then try get them spread out bit more before this stretch comes. When potted in ground mixed soil with some charge and bone meal so think they’ve hit some of that with the growth they’ve shown this week looking really good and hope they keep it up! Happy gorilla growing 🌱

I cannot believe it, 14 days to go then I am going to harvest, I am confident that I would of flushed Lamby quiet thoroughly, for some reason weed needs it’s roots to flushed if you want a super smooth smoke, I wonder if fruit was the same as weed, would we flush the roots to get such tasty and juicy fruit or veggies, or would we bare with that sourness. The real test will be on the 15th of December when it comes to my test smoke, then I shelf Lamby until January after returning from the festive season, by then I would have achieve top tier curing.

Dear diary, Week 9 marks the last week of veg as it ends with us finally transitioning into the flowering phase. As we embark onto flowing, I continue to fine-tune the environmental conditions and adjust nutrient levels to support optimal development. One thing to note is that GC #2 still shows some of those strange leaf mutations on some of the tops but continues to grow well. Mutations doesn’t have to be something bad, but will need to keep a close eye on her to make sure she isn’t a hermie. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 60: I administered a feeding with a nutrient strength of 1.66ms and adjusted the pH to 5.8. Additionally, I increased the light intensity from 20 to 25 dli (daily light integral). To maintain the desired humidity levels, I turned on the air conditioner to dehumidify the space, successfully bringing it back down to 58% as it started slipping up to the 70s again. However, this adjustment caused a slight drop in temperatures to 24.5 degrees Celsius. ⏰ Day 61: During the evening feeding session at 18:00, the plants received a feeding with a nutrient strength of 1.66ms and a pH level of 5.8. Furthermore, I elevated the light intensity from 25 to 28 dli, positioning the lights 50cm above the canopy. The night temperatures have also stabilized at 22.5 degrees Celsius after the AC change. ⏰ Day 62: I provided a feeding with a nutrient strength of 1.67ms and a pH level of 5.6. I also conducted some light low-stress training and removed any growth on the horizontal stems, as each stem already possesses its intended 16 tops. These adjustments will help maintain an even canopy and ensure optimal light penetration. ⏰ Day 63: During the evening feeding session, I administered a feeding with a nutrient solution at a strength of 1.67ms and adjusted the pH to 5.7. To enhance light exposure, I increased the light intensity to 32 dli/500ppfd and positioning the lights 48cm above the canopy. ⏰ Day 64: At 11:55, just before lights off, I applied pesticides to address any potential pest issues. During the evening feeding session, I provided a feeding with a nutrient strength of 1.67ms and a pH level of 5.7. Additionally, I removed some excess growth and increased the light intensity to 37 dli/580ppfd, getting to the optimal levels before flowering starts. ⏰ Day 65 (Day 1 Flower): I initiated the flowering phase by switching the lights to a 12/12 cycle and provided a feeding with a nutrient strength of 1.85ms and a pH level of 6.1. As the plants enter the flowering stage, I have adjusted the nutrient composition. The calmag has been reduced to 1.5ml/l, Bud Candy has been added at 1ml/l, and the A+B mix has been increased to 3ml/l. The plants water consumption has also increased, now reaching approximately 2 liters per day, which aligns well with the timing of the light cycle change. The temperatures have stabilized around 25 degrees Celsius during the day, and the relative humidity ranges between 55-60%. I have also set up the scrog net in preparation for the upcoming stretch phase. ⏰ Day 66: During the evening feeding session, I administered a feeding with a nutrient strength of 1.85ms and adjusted the pH to 6.0.

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues