The Grow Awards 2026 🏆
Likes
Comments
Share
What’s up y’all!!?? Week 8 deserved a video !!! The colas / bud sites are fattening up and starting to put on weight. I was concerned with the lower sites but they seem to be producing slowly but surely. I defoliate large fan leaves and make sure I keep the lower branches tied to the fabric pot to get as much light as they can. The plant is becoming sticky and the smell is getting more prominent. I turned up the air filter to help with the smell. Week 9 is approaching and we getting closer and closer to blowing our very first home grown bud!
Likes
4
Share
Our Watermelon Candy #1 has been left to grow freely and beautifully, just as Mother Nature intended. It's truly beautiful, stunning, with beautiful, well-aligned side flowers and a stunning main stem. It's truly a large plant. It's taking on color, and it's going to flush soon. Look at the flowers, they're beautifully swollen. Techniques chosen: here, just a little bit of trimming at the bottom to boost the flowers at the top: a truly successful operation. We're 100% organic and 1000% Plagron, as always. The soil we've chosen is the recently launched Plagron Bio LightMix, which will allow us to get off to a smoother and more reliable start, without the sudden changes that liquid fertilizers can cause. A week of soil is enough, so don't overdo it. We're intensively flushing, as I said. Choose your favorite style and calculate your results on the website: www.plagron.com Visit the new Growshop area on the Zamnesia website: Z - https://www.zamnesia.io/it/531-growshop A fantastic strain, not too tall but very bushy! Give it a try! Z - https://www.zamnesia.io/it/7484-zamnesia-watermelon-candy-automatic-semi-seeds.html Z - This feminized strain boasts everything you've come to know and love about the original cultivar, but with some welcome improvements. Combining Watermelon x Candy Kush with a pinch of ruderalis genetics, the result is a strain you won't want to miss, we promise. Being an autoflowering strain, the growing options are practically endless. So, whether you choose to grow her indoors or outdoors, one thing is certain: she'll be extremely easy to grow. Otherwise, she'll take care of herself without requiring any special maintenance. With a little general care and pruning, you'll be able to control its growth all the way to harvest. It's perfect for beginners growing indoors, as well as more experienced growers looking for easy-to-grow, high-yielding plants. Although it's not a particularly tall plant, its size can be easily controlled with LST, to which it responds positively. So, if you're interested in experimenting with this technique, don't be afraid to try Watermelon Candy Auto. In just 9-10 weeks from seed to harvest, this strain grows rapidly and, just like the original, will display a bushy canopy completely covered in large buds. Regardless of the growing environment, you can expect impressive yields. Indoor plants produce 350-400 g/m², while plants left to flower outdoors produce 50-100 g/plant. These are quite substantial yields for an autoflowering strain. With a THC level of 20%, Watermelon Candy Auto is a 50/50 sativa/indica hybrid, offering users the best of both worlds. After a few hits, you'll feel more optimistic, and even the most stoic smokers won't be able to suppress a smile. After a few minutes, a deep sense of relaxation will take over, perfect for welcoming you home after a long day. Overall, Watermelon Candy Auto builds on the qualities that made the original so popular, but it also has other qualities that make it a much simpler and more practical option. You know it, but I recommend it. You'll find so much beauty here, essentially "the best that nature has to offer." Z - www.zamnesia.com Music // www.radionula.com + Feng Shui Music + Frequency 432
Likes
71
Share
Hello, Grow Diaries family! 🎉🍌 I’m beyond excited to share the harvest report for my incredible Red Banana Pudding! This journey has been nothing short of amazing, and I can’t wait to dive into the details. Let’s get into it! 🚀 🌿 The Harvest After a wonderful flowering period, it’s time to celebrate the fruits of our labor. The Red Banana Pudding has reached its peak, and I’m thrilled with the results! 🌈🍑 Visuals: The buds have developed beautifully, showcasing an array of stunning colors and a perfect density. The aroma is incredibly sweet and fruity, promising a delightful smoke. 😍 🌟 Harvesting Process • Timing: Harvested at the perfect moment to ensure maximum flavor and potency. The trichomes were checked and showed an ideal mix of cloudy and amber for peak effects. ⏳✨ • Technique: I followed a meticulous process, ensuring each branch was trimmed with care. The process was smooth, and the final product is a testament to the love and effort put into this grow. ✂️💪 Fun Fact: Did you know that Red Banana Pudding is renowned for its unique banana-like flavor with a hint of creaminess? It’s a true treat for the taste buds! 🍌🍰 🌿 Post-Harvest • Curing: After trimming, the buds were carefully hung to dry in a controlled environment, maintaining optimal humidity and temperature. The curing process will enhance the flavor and potency, making for a truly exceptional smoke. 🌬️💨 • Batches: The buds are being sorted into batches to ensure even curing and to preserve the quality of each nugget. The anticipation is building as we wait for this next phase! 🎉 Pro Tip: Proper curing can significantly impact the final taste and smoothness of your buds. Make sure to store them in airtight jars and burp them regularly! 🍁 🌱 Looking Ahead The Red Banana Pudding has set the bar high, and I’m excited to see how it turns out after curing. This has been an incredible experience, and I’m grateful for the support and engagement from the Grow Diaries community! 💚 Sneak Peek: Stay tuned for upcoming content, including taste tests and smoke reports! You won’t want to miss out. 😉👀 🎥 Catch the Full Journey For a detailed look at the entire grow process, including the harvest, be sure to check out my YouTube channel, where I share in-depth updates and tips. Dive into the full experience and see how it all came together! 🌟🎥 Thank you for following along with this amazing journey. Your support means the world to me! 🌍💚 Happy growing and see you in the next update! ✨🌿
Likes
3
Share
@cost420
Follow
Week 16: Purple on the buds and underneath the leaves, with a smell of gelato X milky cookies.
Likes
12
Share
I’m thinking the girls need another week or two, getting very close but I do prefer indica effects so I’m waiting on that beautiful amber color yield might not be all there but quality is definitely showing 🔥💪 shoutout to 420 FASTBUDS for great genetics!
Likes
21
Share
@ZalySk
Follow
This week went fast. It seemed like she didn't change much but she got some colours and a lot of Frost. Will harvest tomorrow and put in the tent with the other Northern lights to dry for the week.this one was a little slower than the other one and didn't look as fluffy, But it could be the lack of foxtails. This one's still just as big and looks even frostier. Chopped day 78, which is 63? Days of flower. They both smell similar, kinda like sour milk or something.
Likes
11
Share
I'm thinking about starting lst soon although I may do a small amount of HST first and prune a few fan leaves. I am VERY amazed and impressed at the speed that these are growing. Check back next week to see just how fast she grows! & remember its 4:20 somewhere!!!!
Likes
13
Share
Hi gromies Ive missed updates over the last few weeks phone problem! But the girls are going great!👍 I'm at the end of week 5 of flower. I'm pretty happy with it for my first scrog grow, could have been better, was in rush to get something into flower, started flowering as soon as they started to grow through net. Should have veged them & trained through the net longer to completely fill net. Pheno 3 was half the size of the other 2. Have started some clones from flowering cuttings, Monster cropping , it works great for increasing yield & saves me from having to keep motherplants. Amazing progress, the roots you see were developed in 8 days! Will start to veg them in the 2nd tent & start the perpetual harvest process. Have continued to grow this strain as I don't have any other seeds at the moment, though it is a nice strain! Definitely time for a change, hint, hint original sensible seeds! Or any other seed companies 👍
Processing
Likes
4
Share
Ph 6,8 and 1 liter a day, sometimes 0,8l then 1,2l depending on the weight of the soil. Yesterday I gave them each 1,4l with enhancer. Every 2 days I give 2 gr Great White on 3liter as the Purple Punch is in his last 2 weeks. I got some Green House Booster that I wa't to try on the Amnesia Skunk, what do you think? Or keep it bio aswell? Greetings
Likes
142
Share
Hey everyone 🤗. This week was harvested properly 😍. All of them are harvested, except for the two Tropicanna Banana (they will be on tomorrow). All finished crop images follow little by little as soon as they have dried enough and have got their actual bud structure 😃. I wish you much fun with the diary, stay healthy Ges and let it grow 🌱
Likes
20
Share
Was a productive week with the aerogarden grow box. Cleaned the tank, water pump, air stones, nutrients probe and a massive massive clean up with the plant itself. I must have removed close to a pound in leafs from this plant over a 3 day period, every time I'd look at it id see a section that I missed. I lowered the PPM down a bit and also trying to keep the temperature in the res down a bit also. Hoping to be done in a few weeks. Happy growing everyone
Likes
224
Share
Well I'm not really sure where to start......Got a lot of work done around the garden this week. Got the first load of boards up on the fence and I've been bracing as I go. Grass all trimmed down and some of the inside of the plants, it was a mosquito magnet in there, wasn't fit to be in, it has gotten better. I gave them what I had left of Gaia Green 4-4-4, which was 3 cups each a little shy of what I wanted to put in so I have another bag coming here very shortly and we will top it up then.So far between everything in the garden right now we have went thru 20kg of 4-4-4, minus 6 cups for the indoor peyote super soil. Also getting some trellis as I thought I had enough from last year but cant seem to find it anywhere. They're getting pretty big now kinda makes me worry a bit, never thought they would be this big..... Purple Punch, #1: 73 inches, #2: 76 inches, #3: 78 inches Orange Sherbert, #1: 76 inches, #2: 72 inches, #3: 69 inches I got some lady bugs today and have released them. I'm hoping to be able to pick up enough boards next time I come home that I can finish closing it in. I won't be closing in the south side, I'm just going to be using the cage, please don't make me regret this...... I would really like to see the stretch set in like NOW but thats not going to happen, maybe next time I'm home we'll start to see flowers, if they don't get wrecked in the mean time, gotta get my wall up!!!!! I'm also going to be setting up an automated curing system this week, I'll have pictures up next week.
Likes
8
Share
ESPAÑOL: Hola chicos, espero se encuentren muy bien! Esta semana las chicas han mejorado un poco, se detuvo el amarillamiento, descubri que Cal-Max de Grotek interfiere en la composicion de la linea hesi por lo que las chicas sufren un bloqueo de nutrientes, dejé de utilizarlo y las chicas han continuado con su desarrollo relativamente normal. ya estan en su 5ta semana de floracion, Tutankhamon ha producido una cantidad gigantesca de resina, Lennon esta engordando a toda velocidad y aun le quedan 6 semanas aprox. Anubis a pesar de su color intenso amarillo palido esta engordando bastante bien y su produccion de resina es inimaginable y ya solo que quedan 2 semanas y media aprox. espero que a partir de ahora ya no surjan mas problemas y que las chicas terminen su floracion de la mejor manera. esto es todo por esta semana chicos, espero que se encuentren muy bien ! INGLES: Hello guys, I hope you are very well! This week the girls have improved a little, the yellowing stopped, I discovered that Cal-Max from Grotek interferes with the composition of the hesi line so the girls suffer a nutrient lock, I stopped using it and the girls have continued with their relatively normal development. They are already in their 5th week of flowering, Tutankhamun has produced a gigantic amount of resin, Lennon is gaining weight at full speed and he still has about 6 weeks left. Anubis, despite its intense pale yellow color, is gaining weight quite well and its resin production is unimaginable and there are only about 2 and a half weeks left. I hope that from now on no more problems arise and that the girls finish their flowering in the best way. This is it for this week guys, I hope you are doing well!
Likes
9
Share
🌱 Week 3, Day 7 Update: Buds Are Blooming! 🌿 Hey Grow Fam, We're cruising through Week 3, and my girl is really coming on—buds are starting to form, and it's a sight to behold! The girl is growing so fast now, drinking 4.5L a day. She could even do with in-between waterings, in my opinion. She's aiming for the stars and shooting for the moon, getting bigger every day and stinking out my room. I had to tie my light higher up with some rope as it wouldn't go any higher, and shoots were getting way too close! I did SCROG when flipping, and I should've been a bit more strict on it (did it longer), but now I realize why SCROG is used. Imagine if I never used it—she would be way too tall. Overall, I'm so happy with how she is growing and can't wait to see the final product. :) But, as with any journey, we've hit a little bump in the road. Despite keeping our feeding consistent at 850ppm, the runoff readings have been creeping up. Last check-in showed a runoff of 1400ppm. It's got me thinking we might be dealing with a salt buildup in the root zone. To address this, I'm sticking with our feeding routine at 800-850ppm. If the runoff ppm keeps climbing or if our plants start showing signs of nutrient burn, I will adjust accordingly, but as of right now, I'm sticking to the same feed as she looks great! ( If I do begin to notice signs of nutrient burn (excess), I will try to water with a lower EC/PPM, like 700ppms, to bring it down. But if I don't get the results I'm hoping for, I will just flush the plant with 3x the media size of water (just plain pH water) to wash out any old salts and reset the medium. You don't really want to do this with coco depending on what stage your at in flower, veg on the other hand flush.? Sure!, if you really need to reset that medium go for it, (i do see tiny signs of burn but thats fine if it gets worse then i have a problem) Let's stay focused and keep our eyes on the prize—beautiful healthy buds. We've got this! #GrowUpdate #Week3 #BudsBlooming #KeepGrowing 🌱🌿
Likes
21
Share
@Naujas
Follow
147 diena:) orai jam nelabai palankūs, bet vis tiek rizikuosiu ir leisiu jam pabandyti sunokti:) Kasdien stebėsiu, kad neatsirastų puvinio:) sėkmės visiems.
Likes
5
Share
@BB_UK
Follow
Well these beauties are stood at a whopping 42" and are now working on their flowers in full effect! I'm quite sure at this point all these clones are the same strain of sugar bomb punch 😁 so ending up with the favourite in their! She reminds me of runtz muffin because of the orange punch in her genetics!
Likes
82
Share
Heeeere we go! Sorry for the late update! This is when I start the flush! I believe the plants are pretty much ready at this point and doing this will just improve the final product! Doing this took me a good chunk of time, mostly because I didn't know exactly how much of water I was going to need (it was a loooot 😫) and how hard/tiring it was to pH it as well. In the end my calculations were off, as I needed far more water than what I had (lol) so I didn't manage to do a full flush... but I still managed to lower the amount of salts and residues to a "decent" level (around 850 to 1500 ppm). I also used flawless finish so I suppose than even when I didn't use enough water that solution alone was enough to help! Besides that the rest of the week was quite calm and relaxing. Thanks everyone for reading! 😍
Likes
2
Share
@CalGonJim
Follow
8/25 1215AM MONDAY MOTHER FUCKERS!!! AMINO GENIUS, YUP!!!!!! 220am. Amino Acid Transporters in Plants: Identification and Function. https://pmc.ncbi.nlm.nih.gov/articles/PMC7466100/ 8/26 515am Advanced Nutrients Cal / Mag worked!! The stalks are stiffer and less florescent green, very good. 6 AM I gave everybody water at one and a half mL per liter each of advanced nutrients bloom pH 6 everyone looks good.👍. 8/26 1139am. Heavy defoliation worked out nicely. Light feeding and the Cal /Mag is already working. THREE COLA??? Now wondering if 3 cola is the best way to get QUALITY in on gallon. It's SO much easier to dry when it's just a single colas no mess. 8/27 1223AM. They look great. I look like death. pretty sure I smell like it too. Betaine: https://pmc.ncbi.nlm.nih.gov/articles/PMC5976740/. ATP https://www.ncbi.nlm.nih.gov/books/NBK553175/. Proline Regulation of L-proline biosynthesis, signal transduction, transport, accumulation and its vital role in plants during variable environmental conditions: https://pmc.ncbi.nlm.nih.gov/articles/PMC6909094/. 8/27 115am. pretty sure my mistakes are comedy gold. 8/27 7am BEST RESIN I HAVE EVER SEEN, LOOKS LIKE A CARPET OF LIVING DIAMONDS....IF I GET MY HANDS ON AN ELECTION MIRCSCOPE.... 8/27 1030am They are ALL taking off today!!! Massive resin and flower growth. The top of Apricot is flowering. The Cal /Mag did its magic, I wont need it again. When I noticed florecent green stalks I knew it was time for Cal/Mag as Grok said the Aminos can inhibit their uptake. 827 2 PM I did a water with one and a half mL per liter of advanced nutrients connoisseur bloom. I added a couple of supplements. I added Purpinator 1 mL in 2 L not much very light nutrients. 8/28 206am. ""Kyowa Hakko Bio (KHB) has established a novel industrial process for dipeptide manufacturing. https://www.kyowahakko-bio.co.jp/english/newbio/dipeptides/"". "L-glutamine (Gln), despite its nutritional importance, is difficult to use as a component of solutions, due to its instability with heat and acids. The Gln-containing dipeptide, AlaGln, overcomes these drawbacks and is expected to be used in medical or nutritional fields. It is branded as Sustamine and is being used in several products." 222am https://www.kyowahakko-bio.co.jp/english/rd/aminoscope/ Info on Aminos 230AM 15 MINUTES TIL FRANK SINATRAS ONE FOR MY BABY...THE QUARTER TO 3 SONG..... https://www.esbnyc.com/about/live-cam MAKE SURE YOU HAVE A VIEW OF NYC ON THE SCREEN ...ITS A WHOLE THEME.... OR THE VIDEO JUKE BOX FROM BLADE RUNNER 2049, I HAVE GOT TO GET ONE OF THOSE! THIS IS ALSO THE TIME I WILL MORE THAN LIKELY BE WEARING THAT CAPTAINS HAT & COSTUME AND THE FANCY SMOKING JACKET AND FAKE PIPE. EVERYONE ELSE JUST LOOKS LIKE AN ASSHOLE WITHOUT THE COSTUME. 145PM. RESIN QUALITY BETTER THEN IVE EVER HAD!!! IT IS LIKE VEVETY FROSTING!!!! SMOOTH, NOT DRY AND CRYSTALY LIKE USUAL!!! ON COOKIE APPLE 1 GALLON 3 COLA. 8/29 1243am Re-evaluating this tonight added 1ml Purpinator last time to add P & K without N, having great results!!!! **Biostimulant Stack** (per 2 L solution): - **Proline (400 mg, 200 mg/L)**: - **Role**: Osmoprotectant; reduces oxidative stress (ROS), enhances drought/salinity tolerance, and stabilizes enzymes. Supports terpene/cannabinoid production by protecting cells during flower stress. - **Dose Evaluation**: 200 mg/L (~1.74 mM) is within the effective range (100-300 mg/L) from plant stress studies. Cannabis trials suggest it mitigates heat/light stress, enhancing resin quality. Good dose for autos in flower. - **Setria L-Glutathione (250 mg, 125 mg/L)**: - **Role**: Antioxidant; scavenges ROS, protects photosynthesis, and detoxifies heavy metals. Enhances yield and bud quality by reducing oxidative damage during flowering. - **Dose Evaluation**: 125 mg/L is safe and effective (100-300 mg/L in plant studies). Aligns with maize trials showing yield protection under stress. Well-suited for autos without risking buildup. - **L-Glycine (500 mg, 250 mg/L)**: - **Role**: Precursor for glutathione and proteins; detoxifies heavy metals, supports root health, and enhances nutrient uptake (e.g., Ca). Reduces toxicity in contaminated soils and boosts flower resilience. - **Dose Evaluation**: 250 mg/L is within the effective range (100-500 mg/L). Higher than your previous mix (100 mg/L), but still safe; supports GSH synthesis and complements glutathione. - **TMG (Trimethylglycine, 400 mg, 200 mg/L)**: - **Role**: Methyl donor and osmoprotectant; enhances heat/drought tolerance, membrane stability, and terpene gene expression. Supports bud density and aroma. - **Dose Evaluation**: 200 mg/L (~1.7 mM) matches plant study ranges (200-500 mg/L). Higher than your prior 100 mg/L, enhancing stress protection without osmotic imbalance."" CHANGE: 🚨 INCREASE...(DONT FEEL LIKE SPLITTING THE CAPSULE OPEN) L-Glycine (1000 mg in 2L, 500 mg/L) 8/29 234am #### Combined Effects This mix is well-tailored for autoflower cannabis in the flowering phase, balancing low-N bloom nutrients with biostimulants to maximize bud quality and resilience: - **Bud Development and Yield**: Connoisseur Bloom’s P-K focus drives dense bud formation, while proline, glutathione, and TMG protect against flower-stage stresses (e.g., high light, heat), potentially increasing yield by 15-30% (e.g., 150-300 g/plant in hydro/coco). Glycine enhances nutrient uptake, supporting larger calyxes. - **Terpene and Cannabinoid Quality**: TMG and proline upregulate terpene synthesis (e.g., limonene, myrcene), enhancing aroma and resin. Glutathione reduces oxidative damage, preserving cannabinoid stability (THCA/CBDA). No EAA in this mix avoids N-driven potency reduction. - **Stress Resilience**: Glutathione and proline scavenge ROS, while TMG and glycine bolster osmotic and metal stress tolerance. This is critical for autoflowers, which are prone to stunting in flower under environmental swings. - **Nutrient Efficiency**: Glycine and TMG enhance uptake of Connoisseur’s chelated nutrients (e.g., Ca, Mg), reducing N needs by improving nitrogen use efficiency (NUE). This aligns with your goal of reducing N fertilizer in commercial farming. - **Microbial Support**: Glycine fosters beneficial microbes, synergizing with Connoisseur’s organics for root health in coco/soil."" 8/29 "What is the equation for amino acids? The general linear formula of an amino acid is R-CH(NH2)-COOH. The 20 common amino acids are grouped in classes according to their side chains. Wow what stupid and pointless information, but I'll use the equation as decoration,,,,,,losers. 8/29 355AM fluctuating IQ, cloud like.....what a fucking pain in the ass brain works a few hours over night, and not all hours are consecutive..........blood loss, central nervous system shorts out with too much light, just great.......goddamnit. 8/29 4AM Early -Mid -Late Auto Flower Nutrient mix Advanced Nutrients Connoisseur Bloom A & B (3ml in 2L) (1.5 ml/L each) Proline (400 mg in 2L) Nutricost brand powder. Setria Glutathione (250 mg in 2L) One pill Codage brand 250mg capsule emptied into mix. L-Glycine (1000 mg in 2L) One pill Nutricost brand 1000mg L-Glycine capsule emptied into mix. TMG Powder: (400mg in 2L) Nutricost brand powder. L-Glutamine: (100mg in 2L) Nutricost brand powder. 🚨 MID-FLOWER CHANGE, LOWERING Glutamine. This is the lowest possible amount I can measure accurately . it will overload with N. 8/29 4:35 AM. I really fucking hate when I talk into this fucking thing and it doesn’t fucking save that I have to fucking do it again. God fucking dammit OK I’m going to do foyer sprays today. They don’t need water yet so today will be spraying with amino acids pH 6.5 this bit fucking save goddamnit.😡😡😡😡😡😡😡😡😡😡 8/29 6:41 AM. The amino spray did a great job spectacular how much the leaves opened up right away after it was done since these supplements are edible for humans amino acids they don’t leave a bad smell like agricultural amino acids I’ve tried to use in the past and I can use them on me. I’m taking the same amino acid for me👍👍👍 8/29 818AM Amino's only Foliar Spray today. 🚨Proline (400 mg in 2L) Nutricost brand powder. 🚨Setria Glutathione (250 mg in 2L) One pill Codage brand 250mg capsule emptied into mix. 🚨L-Glycine (1000 mg in 2L) One pill Nutricost brand 1000mg L-Glycine capsule emptied into mix. 🚨TMG Powder: (400mg in 2L) Nutricost brand powder. 🚨L-Glutamine: (100mg in 2L) Nutricost brand powder. 🚨. Thank you for sharing the details of your foliar spray mix for your autoflower cannabis grow. You’re using a combination of **proline (400 mg)**, **Setria glutathione (250 mg)**, **L-glycine (1000 mg)**, **TMG (400 mg)**, and **L-glutamine (100 mg)** in a 2 L solution, applied as a foliar spray. This mix is amino acid-focused, aligning with your previous interest in essential amino acids and nutrient optimization for cannabis, as well as your questions about flushing agents and personal supplementation. I’ll evaluate the potential benefits, risks, and considerations of this foliar spray for your autoflower cannabis plants, focusing on how these compounds affect growth, stress resistance, and bud quality, particularly given the unique needs of autoflowers (e.g., shorter life cycle, sensitivity to nutrient stress). I’ll also address how this spray complements your earlier nutrient mix and provide practical recommendations. ### Breakdown of Your Foliar Spray Mix (2 L Solution) Let’s analyze each component, its concentration, and its role in cannabis cultivation when applied foliarly to autoflowers: 1. **Proline (400 mg in 2 L = 200 mg/L)**: - **Role**: Proline is an amino acid that acts as an osmoprotectant and antioxidant, helping plants manage stress (e.g., drought, high light, nutrient imbalances). - **Benefits for Autoflowers**: - Enhances stress resistance, crucial for autoflowers under intense indoor lighting or environmental fluctuations. - Supports pollen development and flowering, potentially increasing bud set during the short autoflower bloom phase (4–6 weeks). - Promotes cell wall strength, improving plant vigor and resilience. - **Considerations**: At 200 mg/L, this is a moderate dose, effective for stress mitigation without risking nutrient overload. Autoflowers are sensitive to overfeeding, so this is appropriate. 2. **Setria Glutathione (250 mg in 2 L = 125 mg/L)**: - **Role**: Glutathione is a powerful antioxidant tripeptide (glutamate, cysteine, glycine) that protects plant cells from oxidative stress caused by high light, heat, or nutrient imbalances. - **Benefits for Autoflowers**: - Reduces oxidative damage in leaves, preserving photosynthesis efficiency, which is critical for autoflowers’ rapid growth cycle. - Enhances stress tolerance, particularly under high-intensity lighting or CO₂ supplementation common in indoor grows. - May improve terpene and cannabinoid production by protecting metabolic pathways during flowering. - **Considerations**: Glutathione is not a standard foliar spray component, but at 125 mg/L, it’s a low, experimental dose. Limited research exists on its direct foliar application in cannabis, but it’s likely safe and may complement proline and glycine’s antioxidant effects. 3. **L-Glycine (1000 mg in 2 L = 500 mg/L)**: - **Role**: Glycine supports chlorophyll synthesis, protein production, and nutrient chelation, enhancing photosynthesis and growth. - **Benefits for Autoflowers**: - Boosts photosynthesis, leading to greener leaves and faster growth, critical for autoflowers’ short vegetative phase (2–4 weeks). - Chelates micronutrients (e.g., zinc, iron), improving foliar nutrient uptake, though it may reduce calcium/iron absorption (as noted in your earlier question). - Supports terpene synthesis, enhancing bud aroma and flavor. - **Considerations**: Your previous nutrient mix used 500 mg/L glycine, and you asked about increasing to 500 mg/L (possibly a typo or volume confusion). At 500 mg/L, this is a high but effective dose for foliar application, though excessive nitrogen from glycine could delay flowering if overused in late bloom. 4. **TMG (Trimethylglycine/Betaine, 400 mg in 2 L = 200 mg/L)**: - **Role**: TMG is an osmoprotectant and methyl donor, enhancing stress tolerance and metabolic efficiency. - **Benefits for Autoflowers**: - Protects against environmental stress (e.g., high EC, temperature swings), improving resilience in hydroponic or indoor setups. - Supports photosynthesis and nutrient uptake by stabilizing proteins and membranes, beneficial for autoflowers’ rapid growth. - May enhance terpene production indirectly via metabolic support. - **Considerations**: At 200 mg/L, this is a moderate dose, lower than your previous 500 mg/L, reducing the risk of nutrient burn while maintaining stress protection. 5. **L-Glutamine (100 mg in 2 L = 50 mg/L)**: - **Role**: Glutamine is a nitrogen transport amino acid, supporting chlorophyll synthesis and photosynthesis. - **Benefits for Autoflowers**: - Promotes lush vegetative growth and greener leaves, ideal for the early stages of autoflowers. - Enhances stress tolerance via glutathione production (synergizing with Setria glutathione). - Supports bud development by providing nitrogen for protein synthesis. - **Considerations**: At 50 mg/L, this is a low dose (down from 250 mg/L in your previous mix), minimizing nitrogen overload risks in flowering autoflowers, which are sensitive to excess nitrogen. ### Overall Effects on Autoflower Cannabis - **Vegetative Phase (Weeks 1–3)**: - This foliar spray is well-suited for the vegetative stage of autoflowers, as glycine, glutamine, and proline promote photosynthesis, leaf growth, and stress resistance. TMG and glutathione further protect against oxidative stress from high-intensity lighting or nutrient fluctuations, common in indoor grows. - The low nitrogen content (primarily from glycine and glutamine) supports vigorous growth without overwhelming autoflowers, which require less nitrogen than photoperiod strains. - **Flowering Phase (Weeks 4–8/10)**: - The spray supports terpene production (via glycine, proline) and stress resilience, enhancing bud quality and aroma. Glutathione’s antioxidant properties may protect cannabinoid synthesis pathways. - However, glycine (500 mg/L) and glutamine contribute nitrogen, which could delay bud ripening or reduce THC if overused in late flowering. Previous research (from your amino acid question) showed amino acids can reduce THCA, so caution is needed after week 5–6. - Autoflowers have a short flowering window, so foliar sprays should be minimized or stopped in the last 2–3 weeks to avoid nutrient residues affecting bud flavor. - **Stress Resistance**: - The combination of proline, TMG, and glutathione is highly effective for protecting autoflowers from stress (e.g., high EC, heat, light intensity), which is critical given their sensitivity to environmental changes. - Foliar application ensures rapid uptake, bypassing root zone issues in hydroponics or coco. ### Synergy with Your Previous Nutrient Mix Your earlier nutrient mix (Connoisseur A/B, NO precursors, amino acids, methylene blue) was root-fed and nitrogen-heavy, complementing this foliar spray: - **Complementary Effects**: The foliar spray’s focus on stress protection (proline, TMG, glutathione) and photosynthesis (glycine, glutamine) enhances the root mix’s growth and bloom support. Foliar application targets leaf health, while root feeding supports overall nutrient uptake. - **Methylene Blue Omission**: Excluding methylene blue from the foliar spray is wise, as its effects on plants are unproven, and foliar application risks leaf staining or phytotoxicity. Your root mix’s low dose (2.5 mg/L) is experimental but safer. - **Nitrogen Balance**: The foliar spray’s lower nitrogen (glutamine 50 mg/L, glycine 500 mg/L) balances the root mix’s high nitrogen (glutamine 250 mg/L, glycine 500 mg/L, EAAs, L-arginine), reducing the risk of overfeeding autoflowers. ### Potential Risks and Considerations 1. **Nitrogen Overload in Flowering**: - **Risk**: Glycine (500 mg/L) and glutamine (50 mg/L) contribute nitrogen, which could delay flowering or produce leafy buds in autoflowers if applied heavily in late bloom (weeks 6–8). - **Solution**: Limit foliar sprays to once weekly in early flowering (weeks 4–5) and stop by week 6–7 to focus on bud ripening. Use only water or a flushing agent (e.g., FloraKleen, as you preferred) in the final 1–2 weeks. 2. **Nutrient Imbalance**: - **Risk**: Amino acids (glycine, glutamine) can chelate micronutrients, potentially reducing calcium and iron uptake (as noted in your earlier question). Autoflowers are prone to deficiencies due to their fast cycle. - **Solution**: Monitor for calcium/iron deficiency (yellowing leaves, interveinal chlorosis) and add a foliar calmag supplement (e.g., 1 mL/L CaliMagic) if needed. Your root-fed Connoisseur A/B provides some micronutrients, but foliar sprays bypass roots. 3. **Glutathione’s Experimental Nature**: - **Risk**: Glutathione is not a standard foliar nutrient for cannabis, and its efficacy at 125 mg/L is unstudied. It’s likely safe but may not provide significant benefits beyond proline and TMG’s stress protection. - **Solution**: Treat glutathione as an experiment. Compare sprayed plants to unsprayed ones for 2 weeks to assess improvements in leaf color or bud quality. Discontinue if no clear benefit. 4. **Overapplication of Foliar Spray**: - **Risk**: Foliar sprays can cause leaf burn or mold if applied too frequently or in high humidity. Autoflowers’ dense canopies increase mold risk in late flowering. - **Solution**: Apply early in the day, ensure good airflow, and spray only 1–2 times per week. Use a fine mist sprayer to avoid drenching leaves. 5. **EC and pH**: - **Risk**: The spray’s low concentrations (total ~1.15 g/L) are unlikely to spike EC, but combined with your root mix, monitor overall nutrient strength. The pH (previously 5.9) is suitable for foliar uptake (5.5–6.5). - **Solution**: Test spray pH (aim for 5.8–6.2) and root zone EC (1.0–1.5 mS/cm in veg, 1.5–2.0 mS/cm in bloom) to avoid overfeeding. ### Recommendations for Your Autoflower Grow 1. **Application Timing**: - **Vegetative Phase (Weeks 1–3)**: Apply the foliar spray 1–2 times weekly to boost photosynthesis and stress resistance. The mix is ideal for autoflowers’ rapid vegetative growth. - **Early Flowering (Weeks 4–5)**: Reduce to once weekly to support terpene production and bud set, but avoid excessive nitrogen from glycine/glutamine. - **Late Flowering (Weeks 6–8/10)**: Stop foliar sprays by week 6–7 to prevent nitrogen residues and ensure clean buds. Use FloraKleen (5–10 mL/gal) for a final flush (1–2 weeks) to clear nutrients, as you preferred over SledgeHammer. 2. **Monitor Plant Response**: - Watch for signs of nitrogen excess (dark green leaves, clawing, delayed flowering) or deficiencies (yellowing, spotting). Autoflowers are sensitive, so adjust spray frequency if issues arise. - Compare glutathione-sprayed plants to controls to assess its value. If no noticeable improvement (e.g., greener leaves, better buds), simplify the mix to proline, glycine, and TMG. 3. **Complementary Root Feeding**: - Continue your root mix (Connoisseur A/B, NO precursors, etc.) but reduce nitrogen-heavy components (e.g., glutamine, EAAs) in flowering to balance the foliar spray’s glycine/glutamine. Aim for 2–3 mL/L Connoisseur A/B in bloom. - Add a bloom booster (e.g., Advanced Nutrients Bud Candy, 1–2 mL/L) in weeks 4–6 to enhance terpenes and sugars without excess nitrogen. 4. **Foliar Spray Best Practices**: - Spray early in the light cycle to allow drying and prevent mold. - Use a fine mist to lightly coat leaves, avoiding runoff. - Ensure pH is 5.8–6.2 for optimal foliar uptake. - Maintain good airflow and humidity below 50% in flowering to prevent bud rot. 5. **Glutathione Experiment**: - Since glutathione is unproven in cannabis, apply to a few plants and track differences in growth, leaf health, or bud quality. If benefits are unclear after 2 weeks, consider excluding it to reduce costs. ### Conclusion Your amino acid-focused foliar spray (proline 200 mg/L, glutathione 125 mg/L, glycine 500 mg/L, TMG 200 mg/L, glutamine 50 mg/L) is well-suited for autoflower cannabis, particularly in the vegetative phase, where it boosts photosynthesis, stress resistance, and growth. In early flowering, it supports terpene production and bud set, but caution is needed in late flowering to avoid nitrogen buildup from glycine and glutamine, which could reduce THC or affect bud flavor. Glutathione is an experimental addition, likely safe but unproven, so monitor its effects. Pair this spray with your root-fed nutrient mix, using FloraKleen for flushing, and adjust based on plant response to optimize your autoflower yield and quality. If you can share more details (e.g., autoflower strain, growth stage, hydroponic vs. coco, lighting setup), I can refine the recommendations further. I can also search X or recent studies for grower experiences with foliar amino acids or glutathione in cannabis. Let me know how you’d like to proceed!" 8/29 11:11PM Auto Flower Amino Feeding Mix Friday Night 8/29 10:48PM 🚨Advanced Nutrients Connoisseur Bloom A & B (3 ml/L in 2L) 1.5 ml/L each 🚨General Hydroponics FloraNectar FruitnFusion at 1 mL/L 🚨Proline (400 mg in 2L) Nutricost brand powder. 🚨Setria Glutathione (250 mg in 2L) One pill Codage brand 250mg capsule emptied into mix. 🚨L-Glycine (1000 mg in 2L) One pill Nutricost brand 1000mg L-Glycine capsule emptied into mix. 🚨TMG Powder: (400mg in 2L) Nutricost brand powder. 🚨L-Glutamine: (100mg in 2L) Nutricost brand powder. Thanks for the update! It’s great that you’re adding **General Hydroponics FloraNectar FruitnFusion Sweetener** to your root-fed nutrient mix for your autoflower cannabis grow, especially since you don’t have **Advanced Nutrients Bud Candy** but want to incorporate the sugar-based bloom booster I recommended (1–2 mL/L) to enhance terpenes and sugars. Your current mix includes **Advanced Nutrients Connoisseur Bloom A & B (1.5 mL/L each, total 3 mL/L)**, **proline (200 mg/L)**, **Setria glutathione (125 mg/L)**, **L-glycine (500 mg/L)**, **TMG (200 mg/L)**, and **L-glutamine (50 mg/L)** in a 2 L solution, and you’ve noted success with a similar foliar spray. I’ll evaluate the addition of **FloraNectar FruitnFusion** at 1–2 mL/L to this mix, focusing on its benefits, potential risks, and considerations for your autoflower grow, particularly in the context of flowering (since you’re using Connoisseur Bloom A & B). I’ll also ensure compatibility with your mix and provide tailored recommendations, factoring in your preference for **FloraKleen** for flushing and the autoflowers’ sensitivity. ### Overview of FloraNectar FruitnFusion Sweetener - **Composition**: FloraNectar FruitnFusion is a carbohydrate-based supplement containing cane sugar, molasses, and malt syrup, with added potassium, magnesium, and natural fruit flavorings. It’s designed to enhance sweetness, aroma, and flavor in buds by providing energy for secondary metabolite production (e.g., terpenes, flavonoids). - **Purpose**: Boosts terpene and sugar content in flowers, improves bud flavor, and supports microbial activity in soil (though less relevant in hydroponics/coco). It’s marketed for hydroponic and soil grows, compatible with General Hydroponics’ nutrient lines. - **Recommended Dose**: General Hydroponics suggests 1–2 tsp/gal (1.3–2.6 mL/L) during flowering, aligning with my prior recommendation of 1–2 mL/L (based on Bud Candy’s dosing). Your choice of 1–2 mL/L is appropriate. ### Effects of Adding FloraNectar FruitnFusion (1–2 mL/L) to Your Mix #### Benefits for Autoflower Cannabis 1. **Enhanced Terpene and Flavor Profile**: - The sugars (cane sugar, molasses, malt syrup) provide an energy source for terpene and flavonoid synthesis, improving bud aroma and flavor. This complements the terpene-boosting effects of glycine, proline, and glutamine in your mix, which may increase monoterpenes like limonene and β-myrcene (as noted in your earlier amino acid question). - Autoflowers have a short flowering phase (4–6 weeks), so FloraNectar’s sugars can maximize terpene production in weeks 4–6, enhancing bud quality and market appeal. 2. **Energy for Bud Development**: - Sugars fuel metabolic processes during flowering, supporting resin production and bud density. This synergizes with Connoisseur Bloom B’s high phosphorus/potassium, which drives bud growth. - May offset potential THC reduction from amino acids (e.g., glycine, glutamine), as noted in prior research, by boosting secondary metabolites. 3. **Nutrient Support**: - FloraNectar provides small amounts of potassium and magnesium, which support flower development and chlorophyll function. This complements Connoisseur A/B’s micronutrients, helping prevent deficiencies (e.g., magnesium-related chlorosis) that amino acids like glycine may exacerbate by chelating calcium/iron. 4. **Synergy with Your Mix**: - **Amino Acids (Glycine, Proline, Glutamine)**: These enhance photosynthesis and terpene production, and FloraNectar’s sugars provide additional energy to amplify these effects, potentially leading to sweeter, more aromatic buds. - **Glutathione and TMG**: These support stress resistance, protecting plants during the energy-intensive flowering phase. FloraNectar’s sugars may enhance microbial activity (in soil) or metabolic efficiency (in hydroponics), complementing TMG’s osmoprotectant role. - **Connoisseur A/B**: The nutrient base provides NPK and micronutrients, while FloraNectar adds a carbohydrate boost without excessive nitrogen, ideal for autoflowers in bloom. #### Potential Risks and Considerations 1. **EC Spike**: - **Risk**: FloraNectar’s sugars and minerals (potassium, magnesium) increase electrical conductivity (EC), especially when added to your nutrient-heavy mix (Connoisseur A/B 3 mL/L + amino acids ~1.15 g/L). Autoflowers are sensitive to high EC, risking nutrient burn (tip browning, leaf curl). - **Solution**: Start with 1 mL/L FloraNectar to keep EC in the safe range (1.5–2.0 mS/cm for flowering autoflowers). Measure EC after mixing and dilute (e.g., reduce Connoisseur to 1 mL/L each) if above 2.0 mS/cm. 2. **Nitrogen Overload in Late Flowering**: - **Risk**: Your mix’s glycine (500 mg/L) and glutamine (50 mg/L) contribute nitrogen, which could delay bud ripening or reduce THC in late flowering (weeks 6–8), as amino acids may lower THCA (per prior research). FloraNectar’s low nitrogen content won’t exacerbate this, but the overall mix requires caution. - **Solution**: Reduce glycine to 250 mg/L and glutamine to 25 mg/L in weeks 6–8, and stop all nutrients (including FloraNectar) for the final 1–2 weeks, using FloraKleen (5–10 mL/gal) for flushing. 3. **Calcium/Iron Deficiencyល: **Risk**: Amino acids (glycine, glutamine) may chelate calcium and iron, potentially causing deficiencies. FloraNectar’s magnesium and potassium help, but calcium uptake could still be limited. - **Solution**: Monitor for deficiency signs (yellowing, interveinal chlorosis) and add a calmag supplement (e.g., 1 mL/L CaliMagic) if needed, especially in hydroponics/coco. 4. **Glutathione’s Experimental Role**: - **Risk**: Glutathione (125 mg/L) is unproven for root feeding, though your foliar spray’s success suggests benefits. Its root uptake efficacy is unclear. - **Solution**: Continue monitoring plant response (e.g., bud size, leaf health) and compare to untreated plants. Discontinue if no additional improvement is seen. 5. **Sugar-Related Microbial Issues**: - **Risk**: In soil or high-humidity hydroponic systems, FloraNectar’s sugars could promote unwanted microbial growth (e.g., root zone bacteria) if over-applied. - **Solution**: Ensure proper aeration and avoid overwatering. Use FloraKleen periodically (5 mL/gal every 3–4 weeks) to maintain a clean root zone. ### Recommendations for Your Autoflower Grow 1. **FloraNectar Dosing**: - Start with **1 mL/L** (2 mL in 2 L) to avoid EC spikes, especially with Connoisseur A/B and amino acids. Increase to 2 mL/L in weeks 4–5 if plants tolerate it (no burn signs) and EC remains below 2.0 mS/cm. - Apply during early to mid-flowering (weeks 4–6) to maximize terpene and sugar production, stopping by week 7–8 for flushing. 2. **Growth Stage Adjustments**: - **Vegetative Phase (Weeks 1–3)**: Your mix is suitable, but FloraNectar is less critical here, as sugars are most beneficial in flowering. Consider reserving it for bloom to save costs. - **Early Flowering (Weeks 4–5)**: Use the full mix with FloraNectar (1–2 mL/L) 2–3 times weekly to boost bud development and aroma. - **Late Flowering (Weeks 6–8/10)**: Reduce glycine (250 mg/L), glutamine (25 mg/L), and FloraNectar (0.5–1 mL/L) to minimize nitrogen and sugar residues. Flush with FloraKleen (5–10 mL/gal) for 1–2 weeks with plain water (pH 5.8–6.2) to ensure clean buds. 3. **EC and pH Monitoring**: - Check EC (1.5–2.0 mS/cm in bloom) after adding FloraNectar, as sugars and minerals may increase it. Adjust Connoisseur A/B or amino acids if EC exceeds 2.0 mS/cm. - Maintain pH at 5.8–6.2 for hydroponic/coco root uptake, consistent with your prior 5.9 pH. 4. **Complementary Practices**: - **Calmag Addition**: If calcium/iron deficiencies appear (yellowing, spotting), add 1 mL/L CaliMagic to the mix or as a foliar spray to counter amino acid chelation. - **Foliar Spray Integration**: Continue your amino acid foliar spray (1x weekly) alongside root feeding to maximize stress resistance and terpene production, but stop foliar sprays by week 6 to avoid residues. - **Flushing**: Use FloraKleen (5 mL/gal) every 3–4 weeks and for the final flush (10 mL/gal for 2–3 days, then water) to clear sugars, amino acids, and salts, ensuring smooth-burning buds. 5. **Glutathione Evaluation**: - Given your foliar spray’s success, glutathione may be contributing to plant health. Compare buds from plants watered with and without glutathione to assess its impact on potency or yield. If no clear benefit after 2 weeks, simplify the mix to reduce costs. ### Conclusion Adding **General Hydroponics FloraNectar FruitnFusion** at 1–2 mL/L to your root-fed mix (Connoisseur A/B 3 mL/L, proline 200 mg/L, glutathione 125 mg/L, glycine 500 mg/L, TMG 200 mg/L, glutamine 50 mg/L) is an excellent choice for your autoflower cannabis grow, enhancing terpene production, bud flavor, and flowering energy. It complements the amino acids’ stress resistance and terpene-boosting effects, synergizing with Connoisseur A/B’s bloom nutrients. Start with 1 mL/L to avoid EC spikes, reduce nitrogen-heavy components (glycine, glutamine) in late flowering (weeks 6–8), and flush with FloraKleen to ensure clean buds. Monitor for nutrient imbalances and evaluate glutathione’s role. If you provide details (e.g., strain, growth stage, hydroponic vs. coco), I can further tailor the schedule. I can also search X for grower feedback on FloraNectar with amino acids. Let me know how to proceed!""🚨. 8/3341 AM going to start watering with the amino mix from yesterday, including the sugar💦💦💦🌿🌿🌿. 8/31 12:14PM WOW are they doing great, I think the Amino Spray really did a nice job!! 8/31 854PM. I woke up again drenched in sweat feeling like death, so we are back to normal!!! It only takes a single light to destroy the beauty of the darkness, dont be that light. 9pm put the plants in different tents. OGT, CA 1 & 2 are mid flower the others are just starting, I will top SCA today and replant the top half, STRESS TEST. Mixing Aminos for spraying today, also to feed the top of SCA IF it is successful??!!!
Processing
Likes
1
Share
@Mr_Maes
Follow
Next week should have a huge explosion of growth. This lady is loving life