Likes
Comments
Share
ดอกเริ่มสุก สวยงามมากๆ ตอนนี้กลิ่นสุดยอดมาก ยังให้สารอาหารได้ปกติโดยต้นไม้ไม่ได้มีอาการผิดปกติอะไร
Likes
1
Share
@TTerpz
Follow
Week 3 Day 1: 8/16/25 Fed with nutrients : 8/15/25 Flushed with sledgehammer: 8/18/25
Likes
12
Share
Week 6 begins for LSD and Green Crack! These ladies were thirsty! They will get an extra 1/2 round of feeding later this week to satisfy their hunger. LSD smells so fruity and citrusy and is frosty. Hopefully they'll bulk up from here to the finish line. Green Crack is just starting to show frost, she's got lots of bud development, but still waiting for them to bulk up over the next 2-3 weeks. Thanks for stopping by growfessors 👽🌳💚
Likes
7
Share
@Dunk_Junk
Follow
Flowering stretch stopped by the look so she will get no taller. Trichomes just showing this week.
Likes
5
Share
@TTerpz
Follow
Start of week 14 (hopefully the last) Fed with water 5/15/25 Fed with nutrients: 5/17/25
Processing
Likes
3
Share
Likes
6
Share
Zilk road - grounded genetics Zai zai - perfect tree In - z - air - perfect tree Peachoz - perfect tree 16 x 8l fabric pots. Flipped 4 week since from soaking seed. 1.5m x 1.5m tent Maxibright 660w 8 bar full spectrum led. Day 39 since switch 12/12. Some took couple weeks to show sex. Couple more weeks of nutes before flushing. Got one mongy plant in the corner. Thought it was a male at first but it’s budding so just letting it do it’s thing. It’s slow on taking on any water but it’s still going lol. Ordered some more seeds for next run. Some more perfect tree rotten apple, and then terp treez Rs11 and zoap 39.
Processing
Likes
7
Share
Likes
12
Share
@Daviz_42
Follow
Hola me llamo David y llevo unos 8 años cultivando, me he decidido hacer mi primer diario, espero que os guste y podamos compartir conocimiento y bonitas imágenes. Siempre germino las semillas dentro de un tupper con papel húmedo por debajo luego cubrimos con papel y volvemos a humedecer, retiramos el agua excedente dentro del tupper y a mí me gusta dejarle la tapa puesta encima, pero no cerrada, de esta manera mantendrá la humedad, pero también tendrá una renovación de aire y oxígeno, siempre dejo el tupper en un mueble de la cocina, ya que se mantiene siempre a una temperatura de 20 a 25 grados, según la época del año. Tardaron 2,3 días en germinar y enraizaron todas 10/10. Las Rainbow Melon y Lemon Mandarin son las dos variedades con la radícula más desarrollada. (no tengo fotos ya que decidi empezar con el diario mas tarde.)
Likes
16
Share
@Haoss
Follow
Buds should be dried at 20 degrees in the dark at 40% humidity
Likes
19
Share
I harvested part of it! I had a problem with this plant until 3 weeks of flowering It messed up the whole plant. 😣😒
Likes
74
Share
@Ferenc
Follow
Day 71, 29th of November 2021: Here we gonthe first day of the week 5th of flowering! Nice group like the different "personalities" and "styles". Hopefully not much left I guess 3 weeks and we will be very close to the end :) Let's go then Happy Growing Guys! The only changes I made is the ventilation and the extraction fan is off at the same time with the lamp so only switches on when the lamp does. So this is the set up and and operation schedule now: ViparSpectra XS2000 is on full power which is 240W so 100% capacity. Ventilation: As I mentioned it is off when the lamp is off so 12 hours. When the lamp is on it switches on in every hour and off for one hour. The extraction fan is on 12 hours when the lamp is, and then it takes a rest with the lap together lol ;) Watering pretty much remains the same. Humidity quite is approx 50%, temperature as well approx 26-27 Celsius. Fertilization remains the same since last week, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week.
Likes
43
Share
Controllo acqua ec 1670 ph 6 Questa settimana non Aggiungo acqua né nutrienti, solo controllo ec e ph tutti i giorni. La prossima settimana cambiamo acqua e mettiamo nutrienti nuovi.
Likes
85
Share
Start of day 84 ...... January 1 2022 Start of week 12 ........ 58 DAYS INTO FLOWERING 😕 LOOKS LIKE THERE GONNA GO A LITTLE LONGER THEN EXPECTED ? 😕 ( HAPPY NEW YEARS😋 🎅 🎄) ( SMELLING GREAT ) !!!!!!! Check out the full grow video on latest weekly update Super Exceptional Growth Daily Still adjusting LST when needed and leaf tucking....... Water Only when needed but its drinking more every otherday and adjusting lights when needed...... Rain Water Only ....... ( DAY 26 AND BOTH NL 1 & NL 2 SHOWED PREFLOWERS ) ( DAY 49 AND RESIN PRODUCTION HAS STARTED ) ( DAY 57 , EQUIPMENT FAILURE , main FAN , over heated😡 tripped breaker , reset light timers , lost a DAY, REPLACED new Main Fan 😁 back up running 👌) ( DAY 70 DID ITS FINAL FLUSHING TODAY TO GET RID OF ANY BUILDUP ) ( DAY 77 AND IT SHOWS A SLIGHT DEFICIENCIE MAYBE A CAL/MAG GETTING CLOSE TO END OF LIFE ) IM ALSO DOING VERY LITTLE, SLIGHT DEFOLIATION ( DAY 89 AND ALL IS GOOD , THERE FATTING UP ) DAY 89 .....NL 1 SHOWS CLEAR TO MOSTLY CLOUDY RESIN HEADS , STILL AWAY TO GO ....... DAY 89 .....NL 2 SHOWS MOSTLY CLOUDY RESIN HEADS , JUST WAITING ON THE AMBER TO GET STARTED , GETTING CLOSE BUT MORE TIME NEEDED...... I hope you enjoy my growlog...
Likes
52
Share
@jmsky
Follow
Blueberry Muffin was also chopped on day 64. It never seemed to take off and was the smallest and weakest in the tent. Honestly it was out of frame in so many pictures just because it was embarrassingly small. The terps never really became the Blueberry Muffin that was promised. At most, there is a sweet cedar hardwood spice smell, kind of like men's cologne, on top of a classic dank weedy taste. There's a hint of something like pastry crust when I smell it in the bag. It does kind of remind me of a classic well rounded smoke from decades ago. One friend even preferred this strain over the others in the grow due to the simple classic flavor... not me though, I rank this 3rd out of the 3 harvests so far. It was tiny and so was the yield, with the official weight coming in at 20g. It was truthfully a little less on the scale but I also tested more than a gram, so I'm calling it an even 20. I'll definitely try this again sometime, I support HSC and think they have quality genetics, I don't want this to sour my perception of them.
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
36
Share
Week 14 Day 101 Flower Day 51, she's just about there. Going to apply Terra Powers finisher later during the week. She still has a lot of mycelium left on top and throughout her, I really dialed in the enzymes on this grow. My charts aren't updated properly I'll finish it this week, and will be showing root shots and hopefully we will be seeing a covered pot in roots and not just compacted soil. There's been a lot of fungi and mycelium, that is partly down to Terry Power mixing well with organic soil, it works well as a great soil conditioner. But it takes a while, I constantly fed this girl enzymes. And man O man, look at them buds. The colas are huge in length, and that's down to poor mainline practices and uneven energy distribution. As for left and right been similar, well, put it this way, you'd struggle to actually make something that's more uneven energy wise than this, there's nodes growing over nodes, nothing is even, really terrible mainline it the way it's meant to be done, the purpose was totally ditched here and it was very lazy. And to be honest, unknowingly is an understatement. And the fact I had such failures on my 2nd round with germination, I got to focusing the last few weeks, and pult it all back together and I've hit l got 2 pretty darn good looking phenos, (with no clones taken, another rookie mistake, if you find a pheno you should always have a clone tent and a few weeks into flowering if it's no good or hermies than ditch them, but if you get one like my SLH dwc with very low leaf to calyx ratio if you just have 1-2 clones, you are golden. So currently I have 5 different photos running and I'm pheno hunting. Anyways back to this grow. So, she's nice and fat, but nothing you'd really want to clone, there's nothing special about it. Medium-calyx ratio and good frosty bud. I'm happy with it. Thankfully I'm running a few of the New Green House Unreleased Strains for testing also for barneys so I think photos have stolen my attention. Keeping the RH between 40-45 temp is more stable atm at 28c not really getting low temperature as we are in the height of summer. But I don't care, I have the winter coming to do terpness. I've got 1 SLH left, I just hope she's a good pheno. The buds on this are monsters, and really happy with them. Lots of mycelium left so there's food left and then later in the week I'll apply the finsher. Just a low dose. D103 Sadly my mycelium got hit with some mold. Only 2 small spots, 90% most of the mycelium went through the norm, it degraded as organic matter and made for some heavy buds, she is struggling to hold herself up altogether now, am going to have to brace her to get the best out of the last 10days. She is done, but because of ALL the heavy minerals, that aren't organic, it has HAS to be flushed. Now I was on the ropes the last few weeks about flushing but I've been flushing both my SLH for the last 4 days and when you walk into my tent now, wow, the bang of 🍋 is so strong. I'm so glad I flushed these, As I was like, this is a multiple award winner, so I was like, its not from the smell of the bud as it stands but wow, its like she's at to been doing a 10k run and is sweating, the smell is so beautiful. Wow, wow, wow. I haven't been this excited to try some weed, ever. About the mold, its never a good thing. But as it started on actually fungus I'm not too worried about it. Now, if it had of just been there, I'd be like shit wtf, so I dug through some soil and scraped away the 2 bits of mold, DISCARDED, and mixed up the remaining mycelium into the soil with the spoon I use to mix my soil on top to help dry a little if over watered. Also it help let air into your plant, as your soil dries o2 gets sucked into your substrate and that. COUPON FOR MARSHYDRO use code GGS for discount at any mars site. Big thanks to my sponsors terra power nutrients and marshydro and to the 2 reps who I dealt with. Thanks for reading, Drop a like if you'd like me to visit your grows, either way thanks for dropping by.
Likes
11
Share