Likes
Comments
Share
@TooQuiikk
Follow
The end of what I considered week 2 of veg. These babies REALLY took off, one of the little autos have a little light burn but I adjusted the light to plant distance, nothing else has been affected. I upped the dosage of "Grow" to a little under normal for the autos and full blast for the photos. Up until this point I've only had one harvest from RQS, I should've let her grow more as she was early just due to the inexperienced part of me. None the less, I got about 1.5 ounces, all information is accepted to help up. I believe cheese might have a nitrogen efficiency due to the bright green leaves, will back her off a bit
Likes
6
Share
@802FIZ0
Follow
Had to do the first res change, brought the ppm to 620+/- . This week was recorded on morning number 11. Roots are starting to come out of the net pots in all 3 plants. Looking forward to next week with a new res change to 800ppm. Update. 4/10 Res change to 850 and ph of 6. Day 18. Will do res change around the 28th to a heavy feed for late veg stage of around 950 to 1000. That will bring me into flower for the 2 blue dreams.
Likes
23
Share
Good week this week last day of week 8 and looking really well buds starting to swell and ripen
Likes
5
Share
@ibbzy
Follow
Beautiful transition into flower, will strip and lollipop next week. And start the heavy PK feeding also. Done nothing all week, apart from watering.
Likes
15
Share
@GeOMaTTiC
Follow
Diary Legend: 💧- Watered 🌱- Seedling 🌲- Cut Down 🍃- Defoliation ✂️- Topping or FIM'ING 🚂- Training (LST) 💩- Fertilized Wk4 11/17/21: Day 22. 🚂The plant had to be readjusted already, so I moved the staple further out, the keep the tip bent over. I will begin training of the lower branches very soon. Two bottom ones out to the back, along with the next row. That way it will be growing the opposite direction of the main colas, and allowing more branches to grow into bud. Deciding to train was a great idea, as the lower shoots had grown quite a bit since yesterday. With only 3 more weeks left before flowering, maintaining the plants shape should be easily achieved. Love the dark green colour of the leaves. While many would say there is too much nitrogen, I think it's just fine. No issues with the leaves, everything looks normal. 11/19/21: Day 24. 💧Plant is growing well, minus the distinct leaf burns on the tips. The soil is only holding a slightly higher ratio of nutrients, but it is now the full recommended dose. Overall it's still in quite good condition. One thing I love, is how I messed up the FIM, and allowed the two new shoots to grow, while somehow still having the center shoots still grow. Albeit it's a little smaller, as it look longer to sprout, but it's definitely there. Not sure if it's 3, or 4 shoots now. I will spread the two long ones out a little at first, but then I'll let them all grow out together, like a pronged spear. Watered the plant fairly thoroughly, as it was definitely asking for a drink. 11/21/21: Day 26. Plant is looking great. Lower branches are being tied back and out, to allow for an even spread. About another week of the main stem being trained, with the final week being allowed to grown out and up. I still want it it be the main cola, as it would be nice to see what the colas end up looking like. 11/23/21: Day 28. 💧After a bunch of fiddling around with an idea for the plant, I went back to how it was, using staples. I spread the new growth on the top colas, allowing more light to reach the middle shoot. Just a few more days before I let it start growing out more, and then flip over to flower. I will water the plants after dinner, as I forgot to yesterday, and up until just now (3:54pm). They were fine earlier, so it's nothing to be worried about.
Likes
26
Share
Well, these girls are well on their way into bloom. They are really stacking it on since the addition of the worm castings. I strongly suggest everyone use worm castings in your soil mixes, even if you are using salt-based nutrients.
Likes
109
Share
Flipped on 17-7 to flower🌺 and the first issue came 🤷 the sativa dom cookie ( stretchy girl ) couldnt handle the feed and got a little burned, nothing to bad. She's going on a water only diet next two rounds.
Likes
20
Share
Vamos familia que ya actualizamos la cosecha de estas lava Cake de Zamnesia . Y es que me han sorprendido para bien , vaya flores que se han marcado repletas de tricomas y las flores se marcan aromas dulces Temperaturas máximas en 28 y mínimas en 25 y una humedad estable en torno al 36%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨💨
Likes
26
Share
so I've been stalling transplant till I finish my set up and the plants aren't quite with me on this one. ran into some over feeding issues on both plants. one caused a lockout in Pheno 2 and the first Pheno is the dark green with my j on it. they slowed down a bit so I dropped way back on nutes. my little Pheno hunt is going good altogether and I'm learning a lot. thanks for staying with me. give me a like. 🙏🏿❤️
Processing
Likes
27
Share
@HELCIBAO
Follow
The ladies gain a good size Elizabeth look ready to enter flowering This strain grow really fast😲 from now I try to push them with 24h light on😈 let's see if both start flowering this week👌 -------------------------- UPDATE DAY 25: (finally i've a decent camera so you'll see better pics from now) Got some trubble yesterday morning, Elizabeth started silcing from the topped part 😟 (probably due to excessive lst). Luckly she didn't even noticed it 😅 (i've fix it as soon as i found it out), she continue her road on flowering. While Irene probably will start in next 2-3 days. So next week we should start with flowering. P.s. already started developing a very nice smell👌 next week i'll probably start a time-lapse for flowering
Likes
10
Share
@Mr_Ewell
Follow
9 weeks from sprout. Week 3 in flower. Everything's going smooth.. i think. Had degrees up mid 90s for a couple days and plugged in the ac. My bedroom is cold as fuck now which has my closet ranging from 77 at night to 81 during the day. I really don't want any colder than that. They are starting to smell jus a little more these past three days. At first i didn't smell them unless i touched em for the most part. Ppms staying between 2000 and 2300... Playing the damn waiting game. I got some free time tomorrow. Maybe ill take some of them close up glam-style shots of some buds starting to form.
Likes
7
Share
Week 13 Sour Jelousy Last day after lights on i cut them and they are going in Vivosun Vcure 14-16 days cycle around 55-62F with 58-65RH will add pictures when i cut her , plants smell really nice speacily taller one and the density is decent not rock solid but decent dence , Bear Knuckle is allso done and she smells and tasty like some gassy green apple .
Likes
36
Share
@nonick123
Follow
Día 80 (19/08) Riego con 1 litro H2O pH 6,55 Día 81 (20/08) Riego 250 ml H2O pH 6,55 Día 82 (21/08) Riego 500 ml H2O pH 6,55 Día 83 (22/08) 💥Comienza la floración! 💥 No riego. Día nublado y de bajas temperaturas Día 84 (23/08) Riego 500 ml H2O pH 6,55 Día 85 (24/08) No riego. Día nublado y de bajas temperaturas Día 86 (25/08) Riego con 1 Litro de Té Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
4
Share
@KaliWeeD
Follow
Pues al final… algunas engordaron mas que otras, ya no las queda mucho tiempo…
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
9
Share
Barreling into week 7.. getting extremely excited to get to the finish line. Follow us on Facebook if you want to get your hands on these seeds! Link in profile if you don’t see it here. https://www.facebook.com/profile.php?id=100093098191248&mibextid=LQQJ4d Or just search Trashy Genetics.
Likes
11
Share
Week 16 - Day 103 08/16: Harvested Aaliyah on 08/15, Day 102 from soil and Day of flowering. After one week of pure water for Aaliyah, some of the trichomes have turned amber. I decided to harvest about 3/4 of the plant. Some of the lower buds didn’t receive enough light during the grow, so I’m hoping they can grow a little more before I bring the whole plant down. I also removed some of the dead and very young growth that was coming up. I didn’t have another spot to hang the buds because of the smell, so I tied them over the other plants. Now that she is mostly harvested, the smell has increased. I now have Annie on the side so she is getting less direct light. She already took some bleaching on her main colas. Alexis still has about a week left. I’ll check her trichomes before the next watering to see if I should start flushing. 08/18: Aaliyah’s harvested buds were getting close to being dry, so I decided to start cleaning up some of the sugar leaves. The smaller, less developed buds got chopped up and set aside for some dry ice hash. Since she was on the left side of the tent, a lot of her colas did not receive enough direct light. I hung up a few of the nicer looking ones that I’m keeping as flower to finish drying. [General notes: I still don’t have a scale to take note of the exact wet weight, but I’ll make sure to have one for the dry weight. And since all three plants are of the same strain, I’m going to wait till the last one is chopped up before posting the full harvesting results.]
Likes
32
Share
@BB_UK
Follow
Everything is about to change for these girlies as I have a new light on arrival to cover the whole tent area. TSW2000 courtesy of my mars hydro sponsors! The lights clearly make a huge difference in growths among others I’ve seen on the market! I’m glad I’m a loyal Martian 😎 👾 👽 I’ll continue as I have until then!