Started this week with a DIY trellis net that has really opened the canopy, now covering almost 80% of the tents foot print with colas! Some real nice smells while twisting and bending the branches to shape the net. In super soft water area (40ppm) so adding cal/mag to water to bring ppm up to 100ish.

Day 84!!!! I came back from vacation and immediately started harvesting, this girl is no exception, she is ready for it :) so in general, spring and summer gave the girl everything... a lot of rain, strong wind, cold temperatures, hot temperatures.... well, nature didn't mess around:) but knowing that she grew on my balcony on the north side, this is a really good result:) I admired her on my balcony for 3 months:) her flowers are very stiff and strong, there will be an update when the harvest dries:) good luck to everyone:).

Started Northern Lights Automatic. I will be applying LST so it doesn’t grow too big. Been feeding it RQS Organic Easy Grow tablets. All good so far!

Eva Seeds High Level 2nd Feb 2020 Im updating a day early because Ive had a major fuckup!! I sprayed my girls with potassium bicarbonate and it's scorched some leaves pretty badly 😱😓 I'm hoping they recover because they are just starting to flower FFS 😒 But its my bad and I'm pretty pissed at myself for doing it . Im gonna post up a grow question regarding the burnt foliage . Cheers for checking in Update 4th feb Ive done the soil ph test thankfully it's still well within optimum range so one less thing to worry about for now. I only removed the leaves that were completely burnt and dried out any with burns just on the fringes got left alone , Gave a misted spray with distilled water and added a big ass Fan to the greenhouse. This should create all the air movement needed to help keep it cool and not humid. We have 5 days in a row forecast ahead with temps that are expected to reach 40 celcius during the day. Whilst the greenhouse provides shade , the inside temps can reach 50 on a 40 degree day not good without plenty of air. movement

04.12.2025 After having finished the update last week I went to crop her. When touching her stem I could already notice that her stem is just hole inside. When cropping her she just split apart and first I was shocked. But she recovered well and her main bud is keeping growing strongly. Also I applied two more waterstones and I can notice a better health of the plant.

Hello, all grower brothers and sisters! After a long wait, we are finally ready to show you all the finish of this harvest! I shared a lot of content for you and I hope you enjoy it.. The growth of these plants has all in all been quite simple .... in comparison .... what they have been able to give me back .... is something extremely RARE Between one phenotype and another they each took on a different color....but all extremely potent! Tight, solid buds that overflow with resin 😬😋 Just how I like them!! my work combined with the scrog technique paid off and these fantastic lights meant that even the lower buds got the light they deserved ,But all this would not have been possible if I hadn't had good nutrients with me to enrich the soil at the right point! All without ever checking the EC of the ground 😉 Stay updated

Seguindo com regas de dois em dois dias, nas plantas 2,3 e 5 foram colocados uma colher pequena de substrato preparado completo. notado um desenvolvimento vagaroso da Tropical tangie, ela não parece se dar bem com o frio.

Ich bin sehr zufrieden, unsere Pflanzen sind mittlerweile alle so groß, dass sie im Gewächshaus eine Etage nach unten ziehen müssen. Der Geruch wird täglich intensiver. Das Wetter bleibt durchwachsen bis schlecht, ich bin mir nicht sicher ob das 50W Zusatzlämpchen bei 6 Pflanzen noch wirklich einen Unterschied macht... An Tag 40 gab es ein weiteres mal Dünger, diesmal einen ganzen Liter. An Tag 41 habe ich nochmal ihre Höhe gemessen, sie hat einen Stretch von über 20cm in fünf Tagen gemacht😊zwei große Fächerblätter habe ich entfernt, da sie (zukünftigen) Blüten das Licht nehmen.

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D98/B36 - 21/02/24 ⚗️ EC: 0.8 pH: 5.3 🌡️ T: 21-23 °C H: 45-75 % 🌊 🍗 💧 💼 Some defolation 🧠 🚀 🎬 Added timelapse video and screenshots ________________________________ 📅 D99/B37 - 22/02/24 ⚗️ EC: 0.8 pH: 5.3 🌡️ T: 19-24 °C H: 50-75 % 🌊 14 L 🍗 Calmag - Bloom A-B 💧 💼 I've prepared all the stuff for 3 days out. I'm going to leave today and get back on Sunday (25/02). Humidifier filled up 🧠 🚀 🎬 ________________________________ 📅 D100/B38 - 23/02/24 💯💯💯 ⚗️ 🌡️ T: 19-23 °C H: 45-65 % 🌊 🍗 💧 💼 🧠 🚀 First Day Out 🎬 ________________________________ 📅 D101/B39 - 24/02/24 ⚗️ 🌡️ T: 21-24 °C H: 50-65 % 🌊 🍗 💧 💼 🧠 🚀 Second Day Out 🎬 ________________________________ 📅 D102/B40 - 25/02/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 20-24 °C H: 55-70 % 🌊 RES Changed 💦💦💦 🍗 Calmag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 I changed the res for last 10-15 days of blooming until ripening and flush 🧠 🚀 I'm back 🎬 Big job on media. I edited the cumulated time lapse videos and splitted day by day. Also uploaded the screenshots from the TrolMaster App for each day out. Great job ! ________________________________ 📅 D103/B41 - 26/02/24 ⚗️ EC: 0.8 pH: 5.2 🌡️ T: 20-24 °C H: 50-70 % 🌊 1L 🍗 💧 💼 Some defolation 🧠 She's not yet ready, I think a couple of week more 🚀 🎬 8 pics added + 4 pics macro. Timelapse and screenshots ________________________________ 📅 D104/B42 - 27/02/24 ⚗️ EC: 1 pH: 5.9 🌡️ T: 20-24 °C H: 50-65 % 🌊 6L 🍗 Calmag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 some pH+ 💼 🧠 🚀 End of the 6 weeks of flowering 🎬 Added timelapse and screenshots. I also prepared a timelapse of the entire week with some music 🎵🎵🎵 and weekly rate of T-H and VPD 📈📈📈

Hallo Freunde 👋 Die Test A Version lebt immer noch 😃🤞🍀

Old grow Decent bud Minor yield but must have been the downside of luck

She was a pleasure to grow from start to finish. Took well to topping and lst. Would recommend this exotic strain to anyone... rock hard covered colourful frosty nugs And gassy af

Greenhouse Update

📆 Semana 7 El engorde continúa avanzando y los cogollos siguen compactando y ganando densidad. Los cálices se apilan con más presión y las puntas empiezan a mostrar un volumen más sólido. La resina aumenta claramente, cubriendo flores y hojas cercanas mientras los tricomas avanzan hacia estados más lechosos. La asimilación se mantiene estable y el aroma gana intensidad. Semana donde densidad, resina y peso empiezan a marcar el ritmo final del cultivo. Seguimos creciendo fuerte 💪!

Hello Bros&Sis! Ciao!😊 this time I've decided to made a video update, from the start of the week to the finish, we're gonna see some BIG differences! (The longest is from the end) About the ladies: Girls in coco Royal AK- she's drinking every single drop op solution and has literally exploded! I'm really happy about her training (top/lst/hst). A very strong strain. OG Kush- I don't get this girl, she's definitely not an heavy drinker. Speedy Chile FF- when I re-potted her into 6lt pot, some of my Bros hoped for a Baobab, what do you think?😂 (has some mutations, has a growth of 3 leaves and then 2 branches have joined together and the other has grown normally) Ladies in Soil: UK Cheese auto- I've broke a branch due to heavy crop. Lesson learned. Pink Doc CBD auto- she's growing good, finally! The only thing I'm worried about is that she will not grow so much, because switch is near. Candy Kush Express- A really nice lady, not too tall, good side branches and she take everything with no care less (one of the most "broken" in the tent) Special Kush#1- She likes her new pot, but there's something wrong (see leaves) maybe related to VPD or RU? I've used different techniques on this ladies, but the one I like the most is cropping the branches and the main stems and also broke the branches where meets the stems, to give'em more power, and more "space" for nutrients transports in sight of bloom! That's all mate, we will see soon for the next update! Ciao!😙 (hey @Growdiaries if you want to use my video, feel free to do it, but please, don't change the music, it's already on YT and for CC use)

Looks like close to the end with these 3 that are left standing. They are all still drinking it up, so I'm still pumping the nutes through them. One has some pretty heavy nugs and has the serious lean going. The tallest one of course. Just looking at them, the one that came down already was almost 2 oz. I'm guessing about another 3-4 oz to come out of the remaining 3. It's some heavy, greasy, dripping with trichs kinda weed. Perfect.

Welcome to my CBDV diary. Has been blast.. there's so much more to growing a CBD plant, my point is I'm far from where I want to be with the Quality of the end product as far as density goes. (I got the quality part down) she's 1 stinky sticky ass bitch. Wk 9 Day 58-63 Plant was kept on feed till the bitter end. She was confided to the 70cm2 for her last few weeks of life but I've no doubt, if I had of kept her going under the FC 3000 she would of reached deeper down and gave me denser buds on top. There is so much airy ripe bud below I'd say it'll make up for 1/3 of the overall harvest. Which will be quite a lot. Id say in the 80-100g no doubt. She has some major big buds that are stacked with swollen calyexs that are glistening and very sticky. I can she's had enough. I didn't have the light to finish the end that the FC 3000 created on a lot of my autos. On most I clipped it away after I had to confine my plants to their own tents for good. But, she kept eating. Wk10 63-67 I stopped everything nutrient wise. And let her finish the ride out on water until day 67 and she gladly ate what was in her pot and showed no signs of wanting more, so I hard flushed her 1x pot value (11L) and got a ppm of 900ish, so 2x (22ish) more the pot value until it came down to 210. And for 3 more days I left them girls drink what they could from the pot and left them under my 100w where they've lived the past 3-4 weeks and I'm gonna pull them this week, they are resting 30hrs already and then I'll pull them, and harvest them whole, roots and all will be pult and I'll shake the clay off, bag the roots and hang dry upside down, (so no dirt falls on the buds while drying from the roots) and will dry at 55-60 rh with a temperature of 17-19c. I'll try keep the RH around 59 but I'm not gonna worry too much if it differs from that range. I already cut a wee bud off her the today, just a small 1 to try her for taste. And I'll rate it on harvest. As she's low on CBD, I'll rate her on taste. But, she'll be a nice addition to my full THC smoke no doubt. Never really removed any substantial growth from her to even call it a defoliation, there really was no need. I done a decent job at LST and my plants got rotated every day and I pult nodes/leafs this way and that. So, I'm happy with the results. She has a lot of girt and not too much lollipoped with a good amount of CBDV bud in 70 days. Very nice indeed.. Thanks so much for looking at my diary guys. I hope to do better the next time. But, as I am using dry additive powders I'm sure I'll be able to dial in that key nutrient ratio for my CBDS. She's been my biggest auto of this grow. At 71cm tall, and a big ass cola I am very happy. She has a lot of girt and stinks fruits, mainly passion, I'm guessing. As I've learnt, you don't know the true smell of your weed until you get at least a 2 month cure on it. Harvest Day.. Day 70 was done on day 65 then I left as I like my weed little on the harsher side. She very punchy. Has like a deep wood smell but very citruses with hints of tropical fruits. I've harvested 6 autos today. And, its hard to pick up the smell. Very sweet smelling and citrus fruits. (Ill give a more independent smell profile upon the trim and hopefully she'll come into her true smell upon a 2 month cure. As all my bud is given) To my sponsors from kannabia thanks so much for allowing me to try this plant. I've loved growing it. Hopefully I'll do it more justice on my next round of growing it. And, to my sponsor from marshydro, she's a rock star. Thanks very much for all your help. COUPON FOR MARSHYDRO Use code "ggs" at any official marshydro site for a discount. FC 3000 & MARSHYDRO LIGHTS The FC 3000 300w it has a high ppfd 1525 umol/s, 2.85 efficacy and has the new UV addition which brings it closer to the (RA) spectrum, that's the Sun spectrum. The FC-FC-E has this, Also it has a much even PPFD making for a more evenly grown canopy and has a deep penetrative light as it allows you to move the light closer to your canopy with a reduced risk of light stress. The TS versions are a great light to. These are different though. As they have a much higher ppfd in the middle, so I suggest you rotate them plants and move em about to get the best out of the high PPFD And to the community. Much respect for anyone that can grow their own bit of chronic. Fair play to you. Enjoy your harvests and thanks for tuning in. Be sure to drop a like or comment so I can visit your diaries. Either way, thanks for dropping by.

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Day 71 I didn't label the plants so I don't know which is Sheryl or Candace anymore. I'm also not sure what I did different to have such varying results. One is thick, the other is not worth trimming. Based on camera zoom photos it looks like we're at 10% amber trichomes, which means it's likely the last week. Lesson: Label each plant, take better notes. I bottom watered 6.5ph 1tsp of Terp Tea Bloom in 15oz each. Possibly the last watering. I ordered a digital microscope so I can be sure on the trichomes. Day 72 Microscope came in. It's not great but it was $15 so... anyhow I could see that the chunky girl is ready with high amber trich count (30%) upper plant and about 10% in the lower buds. I put her in dark and will chop tomorrow. The skinny girl that pissed me off last week has about 5% amber trichomes so she got fed and watered. Additionally, she stacked up and put on some weight. Nothing too crazy but it's noticeable. I'll give her another week or two. By the time the chunky plant is done drying (HerbsNOW dryer) and in a jar, the skinny plant won't be skinny anymore and she'll be ready to come down.