=)

20/01/2025 Seedlings have definitely grown in size! Bottom watered again today. Mixed 3L solution of Calmag, Growell Plus 8:8:8, Seaweed extract (2ml / 1ml / 1ml) and watered 1L per pot. Solution was sucked dry from tray relatively fast, guess the roots are growing. 21/01/2025 Measured PPFD / DLI today and found that my existing light had a relatively low ppfd value output. Reading 50 plus PPFD / 4.5 DLI at 24 inch height 75% power, generating insane amounts of heat if the grow tent is closed. Thing is the max ppfd is about 150 at 24 inches. Can't bring down the lights more without potentially causing light burn due to the high DLI low ppfd ratio. Fortunately I have the tent in a temperature controlled room so I had to leave the tent open to ensure there was good airflow cooling down the excess heat without causing too much of a temp shift. Managed to bring up the humidity by adding a larger humidifier maintaining 60 to 70 % range. Did myself a favour and ordered the vivosun aerolight a200se to go along with the rest of the vivosun kit. Hoping it arrives by week 3! Besides this, seedlings look healthy, did some foliar feeding with homemade wood vinegar (5ml to 1L) after lights out. 22/01/2025 I almost killed my plants with light lol. Turns out my existing light was putting up alright dishing out 1200 pfd from 24 inches at max. I noticed some skewed reading when I was tilting my phone screen so decided to take off the screen protector and damn.. ppfd was at 800 ppfd! It was the screen protector not the lights 😆 Since there were no signs of yellowing or wilting I decided to keep it at 400 ppfd. Bottom watered with 1L each of (2ml CalMag / 1ml Growell Plus 8:8:8 / 1ml Seaweed to 3L phed to 5.9) had about 100 ml excess after waiting for 10 mins so I drained out the excess. 23/01/2025 Fortunately my blunder with the lights didn't cost me too much. Plants still looking healthy, 3rd set of true leaves opening up.

20/01/2025 Seedlings have definitely grown in size! Bottom watered again today. Mixed 3L solution of Calmag, Growell Plus 8:8:8, Seaweed extract (2ml / 1ml / 1ml) and watered 1L per pot. Solution was sucked dry from tray relatively fast, guess the roots are growing. 21/01/2025 Measured PPFD / DLI today and found that my existing light had a relatively low ppfd value output. Reading 50 plus PPFD / 4.5 DLI at 24 inch height 75% power, generating insane amounts of heat if the grow tent is closed. Thing is the max ppfd is about 150 at 24 inches. Can't bring down the lights more without potentially causing light burn due to the high DLI low ppfd ratio. Fortunately I have the tent in a temperature controlled room so I had to leave the tent open to ensure there was good airflow cooling down the excess heat without causing too much of a temp shift. Managed to bring up the humidity by adding a larger humidifier maintaining 60 to 70 % range. Did myself a favour and ordered the vivosun aerolight a200se to go along with the rest of the vivosun kit. Hoping it arrives by week 3! Besides this, seedlings look healthy, did some foliar feeding with homemade wood vinegar (5ml to 1L) after lights out. 22/01/2025 I almost killed my plants with light lol. Turns out my existing light was putting up alright dishing out 1200 pfd from 24 inches at max. I noticed some skewed reading when I was tilting my phone screen so decided to take off the screen protector and damn.. ppfd was at 800 ppfd! It was the screen protector not the lights 😆 Since there were no signs of yellowing or wilting I decided to keep it at 400 ppfd. Bottom watered with 1L each of (2ml CalMag / 1ml Growell Plus 8:8:8 / 1ml Seaweed to 3L phed to 5.9) had about 100 ml excess after waiting for 10 mins so I drained out the excess. 23/01/2025 Fortunately my blunder with the lights didn't cost me too much. Plants still looking healthy, 3rd set of true leaves opening up.

20/1/2025 Seedlings have definitely grown in size! Bottom watered again today. Mixed 3L solution of Calmag, Growell Plus 8:8:8 and Seaweed extract (2ml / 1ml / 1ml) and watered 1L per pot. Solution was sucked dry from tray relatively fast

Dane, We all should help one another. Human beings are like that. We should live by each other’s happiness - not by each other’s misery. We don’t want to hate and despise one another, share the Joint. And mother earth is rich and can provide for everyone. We can Grow enough Happiness, In this paradise, there is room for everyone. We only exist to bring joy into the world and The way of life can be free and beautiful, but we have lost the way. Grow High and Give the world A smile. At the end we own nothing more then all our memories, lets make them amazing for everyone, nothing to loose only everything to win. A last kiss goodby, a second one, softer and long as a sign, that you are woth it. That Everyone worth who loved and give. Enought Hippie Talk, now have a nice day and an even better grow, thx for watching by. the buds looking soooooooo good already.

Das ist die letzte Woche bevor das Licht auf 12/12 umgeschaltet wird. Ich habe auch endlich untenrum etwas ausgedünnt, sollte ich in Zukunft früher machen. Die Fläche ist doch etwas sehr voll geworden - vielleicht habe ich doch zu viele Triebe stehen lassen.

This girl is doing what she wants spreading out and loving the space I made for her with the 10 gallon pot. There are pistils popping everywhere on her pre flower I guess I have to start flowering her for the next week.

Nochmal etwas Blattwerk entfernen um die Luftzirkulation zu verbessern und Licht an die unteren Triebe zu lassen.

everything is going smoothly:) this week I did a haircut for my girlfriend, and a little LST, the girl has already recovered from the stress :) now I'm going on a short vacation, and I'll leave her alone for 4 days:) :) good luck to everyone.

everything is going smoothly:) this week I did a haircut for my girlfriend, and a little LST, the girl has already recovered from the stress :) now I'm going on a short vacation, and I'll leave her alone for 4 days:) :) good luck to everyone.

Trotz Fehler wird getrocknetes Material gut denke ich. Wird jetzt ca. 2 Wochen bei 60% RH und ca. 17 grad Celsius trocknen

Auch diese Woche ist eigentlich alles gut gelaufen. Die Luftfeuchtigkeit ist relativ hoch und das wird vermutlich noch Probleme bereiten. Ich habe schon zwei Luftentfeuchter im Zelt platziert, die helfen allerdings nur bedingt. In Zukunft werde ich wohl doch weniger Triebe stehen lassen und mehr ausdünnen, gerade im unteren Bereich.

Finally at the end of another grow, unfortunately it's the worst grow I've done!!! My heart just wasn't in this grow! It started out well until the flowering stage. Which was right around Christmas, super busy with other things, not maintaining them every day. Leaving them days at a time 4 to5 days before checking ph & ec! So they were constantly rising to high levels, went away a few days & had a watering line come loose flooding the tent & draining the reservoir so they had no water or nutrients for days. Pure laziness!

Finally at the end of another grow, unfortunately it's the worst grow I've done!!! My heart just wasn't in this grow! It started out well until the flowering stage. Which was right around Christmas, super busy with other things, not maintaining them every day. Leaving them days at a time 4 to5 days before checking ph & ec! So they were constantly rising to high levels, went away a few days & had a watering line come loose flooding the tent & draining the reservoir so they had no water or nutrients for days. Pure laziness!

Unfortunately I'm not going to harvest much off these girls.

7ª Settimana di Fioritura 💐 Eccoci qui con la bella Lemon OG 🍋🌊 che é diventata grande! I suoi fiori sono sempre più carichi di neve ed il raccolto si avvicina sempre di più!

Es wird…. Die trichome sind zu ca. 90% milchig, rechne mit ca. 2 Wochen bis zur Ernte

Week 6 of veg in the books and I’m rather disappointed with this strain overall. Recovery time on the topping was terrible (if they recovered at all), internodal spacing is extremely stretchy which isn’t at all lending to more pronounced side branching. On top of that they just aren’t growing quickly at all. The fan leaves are massive and the bud sites are very limited. None of them have even begun to show vegetative maturity. Well still take the run to flower but I don’t expect to take this batch of F1 seed any further with these types of characteristics. If the bud is anything short of straight 🔥, I’ll pitch the whole lot of seeds as simply unworthy. Oh well. It was still worth a shot… no deficiencies or issues - just a shitty genetic at this point.

We are almost at the magic moment, it is about to go into flowering and the vegetative phase is practically over in a few days. Our Purple Urkle by Zamensia is a very beautiful plant with a good internodal distance and is developing very very well. We have just done the last topping that brings her 16 tops, 16 small clones of the main cola that will come up I hope at the same time and all together and above all I hope that the cold will give us a great resin and a beautiful coloration. During the topping the use of nitrogen is a very delicate subject. The cuts of the topping slow down the plant and the leaves tend to grow bigger going a bit into over, it happened to her then you detach and it tends to discharge now we are at the moment that we are starting to give nitrogen again to then go into flowering. It is a process that must be nuanced very delicately. Ideally it is to start by preparing the soil with fertilizer and add if necessary. I over-fertilized the plants a bit but it's something I've always managed very well once I got to flowering. Next time we'll add some fertilizer to the soil with this technique it's very suitable. Wait for the uncle BreadandBuds.... We are always using soil, feeding and all the recommended additives from Plagron 100% organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy.. ---- https://www.zamnesia.io/en/11168-zamnesia-seeds-purple-urkle.html Zamnesia Description // A direct descendant of a Mendocino Purps phenotype, Purple Urkle is a high-performance cultivar from Zamnesia Seeds. This feminized, indica-dominant strain is sure to win over any cannabis grower. With a THC content of 20%, Purple Urkle has a lot to offer from seed to harvest and beyond. A grape-flavored adventure, Suitable for indoors, outdoors or in the greenhouse, Purple Urkle is a very resilient strain. Growers will be impressed by how easy this cultivar can be managed. Purple Urkle can reach 120cm indoors and 160cm outdoors, but if you want more control over the height you can use the LST technique. Purple Urkle has fantastic flavors and aromas that intensify during the flowering phase. Regardless of the method of consumption, Purple Urkle offers tangy, fruity flavors that lean towards notes of grapes, berries and plums. The effects of this strain are soothing and relaxing, with uplifting sensations that make the experience suitable for any occasion, whether in a social setting or alone. All the best that mother nature can offer is on ---- www.zamnesia.com

Last week inşallah