The Grow Awards 2026 🏆
Likes
Comments
Share
@Dr81n
Follow
Removed a herm and added plants to follow auto harvest. 3 Deadhead og and one cherries jubilee from caliconnection. No clone straight run.
Likes
26
Share
It was a wonderful journey, I really had the honor of doing this girl many times, this time even close to the Monster Zkittlez with which they generated the Runtz who was also in the grow. Super modern family situation, I wanted to try to figure out which one I liked best, and I still haven't been able to. at least I'm still tasting Runtz's first flowers and it's heavenly but the freshly picked Gelato and the upcoming Zkittlez are scary just to see them. Super resin, it really looks fake, I also have some macro photos that will make you cry. The resin is everywhere the trichomes are even in the largest leaves the scent is of the garden of eden. wow. Show. Really nice. It was freshly cleaned I want to try to do the resin the first time and then I have freshly cleaned and hung the whole girl upside down under the crop data next week when I clean and can give the detail. Gorgeous. Before being collected, she did two music therapy days, one of which in the dark with frequencies for plants and together we listened: 1 - Paolo Conte - "Gelato" al Limon 2 - Raekwon - Ice Cream to stay on the "Geato" theme and then all the M83 discography to be collected with the very famous Outro of Interstellar really seems to pass to a better life listening to that stuff. Top of the top
Processing
Likes
3
Share
@camo420
Follow
NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 3x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix
Likes
27
Share
What a great week it’s been!today is day 65 from seed!! One of the Forbiddin Runtz got it’s last feeding on Friday and will get flushed for 2 weeks and will be ready for dry and cure! The rest will still remain getting same dose of nutes the rest of this week and most likely into the next! This batch felt like it went so quick ! Hope you all enjoy an watch out for next week !
Likes
10
Share
@Drtomb
Follow
The tricomes are piping and the smells are oozing.. Everything is rocking along hard! I'm running there finisher nutes now. At about ~900ppm
Likes
Comments
Share
@Randagio
Follow
Dopo una bella essiccazione e una bella concia il barattolo sa prorpio di biscotti... L'effetto è bello bilanciato tra mente e
Likes
2
Share
this week im starting the pre harvest nutes for the white widow she's about to be cut in about 2 weeks the northern lights is doing good i jad to put them under 12 hrs of light cause I have photos flowering but still coming along good I get my veg tent thos week so it will be better
Likes
13
Share
Seed production was a great success grow this stain was awesome didn't run into any major prob and the scent is off the chain can't wait to see how the new wave come out( follow the vaccine diary if ur interested to see the out come) #happy growing
Processing
Likes
10
Share
@LoveBud90
Follow
So first week of flower or pre flower maybe?? But whatever it is they are now outside and getting direct sunlight from about 10am to 4pm and loving it. They started off this week looking a little yellow on the new growth but by Wednesday all the leaves are nice and green. Got the day off tomorrow so think I'll do a light defol and have another look at the lst wires. The mother of this clone is about a week away from harvest (my first ever harvest!!) And she smells great, everytime I walk outside. Looking forward to a comparison, my first soil harvest and my first hempy 1 after another. So I just got 2 feeds in this week, had some rain which kept the coco moist for longer so now we wait. Thanks for stopping in 👍
Likes
7
Share
Likes
Comments
Share
@Chamed33
Follow
Just feed her ph water for the last couples of days I’ll be chopping her down this week due to heat wave in my area .. wish I could let her go few more days At this stage she’s releasing nitrogen still
Likes
11
Share
I think that all is going well. One of my lilluns is bigger than the others but they all seem healthy.
Likes
190
Share
@Herbalize
Follow
Hello folks For this second week of flowering the girls are doing well and they are healthy 😊 I removed the 400MH and put the 400W HPS Watering every 4/5 days PH 6.2, without nuts this week, because the ppm runoff was still a bit high and I wanted to make a little "flush" before using flowering nuts Runoff : Ph 6 / 1650 Ppm Did a defoliation at the end of the week,so the light could cross the canopy, even though I usually dont like to remove leaves, I have to try👌 Follow, like and comment if you enjoy it I also have a second diary with 2 Remo Chemo Peace Love & Weed 😍👊
Likes
14
Share
@Kdog27
Follow
Let’s see what the future holds for these lady’s
Likes
42
Share
@MrJoint
Follow
🍁Dicas e sugestões? As meninas agradecem. 📸Update de fotos, vídeos e informações diariamente. DAY 15 Muito feliz com a germinação da COP, ela está se desenvolvendo muito bem. Good girl! 💡Coloquei a luz em 50% de potência e gostei do resultado. 💦Reguei a C1 e C2 (250ml cada) com BACTOHEMP bacilos e bactérias + Acophyllum extrato de algas. Elas parecem felizes :) DAY 16 Escoras de apoio para C3 e C4 até o transplante. COP está muito bem. O transplante será realizado antes das meninas dormirem (menos stress para as raízes) e serão regadas com 💦1L de água + 🥄1 colher de chá de BACTOHEMP. DAY 17 C1 e C2 estão cheias de vigor. COP e C4 reagiram muito bem ao transplante. C3 um pouco triste com o processo. DAY 18 Todas as meninas estão lindamente bem! C3 já está com mais saúde e feliz, 24h após o transplante. 📝NOTA: 💡Aumentei o dimer do Led para 75% ⚠️Temperatura aumentou 3°C no growbox. DAY 19 🚫🐜Antes das meninas dormirem vou borrifar óleo de neem (250ml) para evitar pragas e insetos. DAY 20 Hoje foi dia de beber água! Dia de rega, as meninas estão todas saudáveis. DAY 21 C1 e C2 estão com muita sede! Estava regando 125ml/dia, hoje aumentei a para 250ml/dia. Após a difícil germinação COP está crescendo muito bem. 🎃Obrigado por verificar o meu cultivo.
Likes
8
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱
Likes
9
Share
GSC (& Sour Diesel - tentmate) seem to be growing with very healthy green growth. Responding well to light 1/3 to 1/4 recommended dose of Fox Farm nutes. Sour Diesel, which was much smaller and had weak trunk stem as seedling is slowly catching up to GSC.
Likes
22
Share
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ==> Comments From Other "Living Soil/Super Soil" Growers Are Always Welcome <== ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION I am very excited about this grow as it is the first time with a new setup. I have added a new light and am going to try a super soil grow for the first time. I have a Mephisto Genetics Double Grape between paper towels and waiting to sprout. The space is about 18 inches by 24 inches. The ceiling slopes down, so I don't have much room at the rear of the space. For medium I am using Fox Farms Happy Frog augmented with perlite. The bottom third contains 0.5 pounds autoflower blend of a "super soil" additive from Nature's Living Soil. (https://amzn.to/2PUHc6k) I am using three-gallon cloth pots. The light is a Horticulture Lighting Group 135W QB V2 R-Spec LED kit. NUTRIENTS Tap water pH’d to 6.5. pH lowered using 1.5 TBS unsulfured blackstrap molasses and apple cider vinegar. One-half TBS of vinegar lowered pH about 0.5 points. The medium was very dry. Slowly watered to allow the moisture to be equal throughout the soil ISSUES My while I have yet to put the seed in the dirt, I am concerned about temperatures. They are currently running at about 86F. I would like to get it down to about 80F. DAILY LOG DAY -2: STARTED SEED * Started seed in my traditional manner. Between paper towels soaked in 5% bleach solution, 0.25 tsp/0.5 Cup water. Temp 82F. DAY -1: ACTION *The smallest of tip has appeared. Will put in soil in a few hours. Day 0: SEED PLANTED. * Refrigerator filtered water. pH 6.5. 1 cup (250ml) added very carefully. * Covered with humidity dome. * Light from Soil: 32.5” * Temperature: 82F DAY 1: SPROUT The sprouted seed has shown itself above the soil. A nice Christmas morning surprise. Now I can start counting the days. * Watered with about 200ml of water at pH 6.5. Used apple cider vinegar to lower the tap water pH. * I was pleased to find that my tap water does not contain chloramine. I was reading bad things about chloramine and "living soil." It can kill beneficial microorganisms. All I did was ask my water company and they replied saying "we found no mention of chloramine use in the system:" Just what I wanted to hear. * After looking at other diaries using 250W LEDs, I moved my light down to 25 inches. DAY 2: NO WATER FOR YOU * No watering today. There is plenty of water in the soil and I want the roots to stretch and work. * Working on increasing the humidity and getting more control over the temperature. DAY 3: WATER PLANT, NOT POT. ADDED MYCORRHIZAE. * Following the GrowWeedEasy watering suggestions for Kind Soil * 500ml water at 6.5 pH, around the plant and not across the full 3-gallon bag. * The fan gently moves the seedling to keep it strong. * Had minor unexpected run-off. I hope to avoid that in the future. * Added 1/8 tsp Great White Mycorrhizae dissolved in 100 ml of 50 ml water/50 ml molasses mix. Did not pH as it is such a small amount of solution compares to the watering earlier today. DAY 4: NO WATER, NO PICTURE * Nothing really new. So no reason for a picture. * The soil is dry on top, but the bottom of the pot is still damp. So I will watch it, but I don't expect to water today. * Adding a small intake fan has dropped the temps to about 82F, I think they can live with that. * A humidifier arrives tomorrow and I think that will be my last step to improve the environment. DAY 5: 500ml WATER, LOOKING GOOD * The plant is looking good. The second set of true leaves has a bend, but nothing to worry about. DAY 6: 500ml WATER. NEW HUMIDIFIER * It wasn't really necessary to water today, but I did simply to stay on the schedule I am using. * Given the lightness of the soil and the moving air, I don't anticipate any problems. * Added a humidifier yesterday evening. It's bringing the humidity up, but I need to keep the space closed and I'm a bit concerned about having to provide it with distilled water frequently. ~~~~~~~~~~~~~~~ WEEK ONE IN REVIEW ~~~~~~~~~~~~~~~ * Watered with 750 ml pH's tap water. Watered slowly to avoid any runoff. * The plant is looking very healthy. It looks as if the roots are really starting to work as the plant is darker green. * Balancing temperature and humidity is tricky, but I think I will be able to get it stabilized with a bit more work. * Target Relative Humidity: Seedlings - 65-70; Vegging - 40-70; Flowering - 40-50 ==> Beginning Next Week I Will Only Post Twice A Week, Mid-week And End Of The Week. <==
Likes
9
Share
This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.