**Grow Report by Zuppler - Week 1 Flowering Phase** Ayo, what’s good fam? Zuppler back in this b**** with the week 1 flowering update, straight outta the capital. We just flipped the switch to that 12/12, and these girls already know what time it is – they starting to stretch out like they tryna reach for the stars. We runnin’ that Ape Formula from Advanced Nutrients, got the whole squad dialed in on some next-level s***. Feeding them queens like they royalty, nah mean? We keepin' it real precise with that RO water – pure as it gets, no cap. I ain't lettin' no junk minerals mess up the game. We stayin’ locked on that pH balance like a sniper, so the nutes hit right, and them roots keep drinkin’ smooth. So far, no issues – the plants look strong, real healthy. Ain’t no signs of deficiencies, and the leaves stayin’ green like money. The canopy lookin’ good too, spreadin’ out evenly. All them colas just gettin' ready to explode. You already know, we keepin’ everything low stress, tryin’ to maximize that yield without no drama. Temperature’s steady, humidity right where it need to be – we not takin’ no L’s, bro. It’s early days, but the stretch is comin’ in strong. In a minute, these girls gon' be stackin’ up them buds real heavy. I can already tell we ‘bout to be sittin’ on some fire soon. Stay posted, this is just the beginning. Zuppler signin' out.

Day 64, 22nd of November 2021: Hi there! Here we go..... so basically pistils are appearing stronger this is the 2nd weeks since they started producing pre flowers. The plants getting a bit light might be some air circulation problem? However they look good and of course closer to the end the gettin' older so the leaves also die. Set up and timing is the same since flower season started. ViparSpectra XS2000 is on full power which is 240W so 100% capacity. Ventilation: 12 hours period when the lamp is on it switches 1 hour on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same approx 50%, temperature as well approx 26-27 Celsius. Fertilization remains the same since last week, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week.

12/21 - Transplanting into a 7 gallon pot (coco/per) - increasing feeds starting tomorrow - swapped lights running the Marshydro 150W full spec - Did some light defoliation 😎😎😎😎😎 12/26 - Thus far she has been coming along nicely - transplant into the 7 gallon pot should be completed by this week - slight increase in Myco feed 12/30 - Light defol - transplanting into the 7 gallon put tomorrow - running high temps/ running high temps. 😎😎😎😎😎😎😎😎😎

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Another Defoliation at the end of stretch this week for the Northern and she's now in full bud mode at end of Week 8. 3-4 left I think before the chop and she's just a happy monster. Buds forming nicely on't Chemdawg despite a bit of Nutrient Burn on some of the leaves. Skipped a feed last week and replaced with Molasses only just to help her fight off the excess 2nd Chemdawg looks like she will bud from head to toe a fairly straight forward week for all the girls but started to stink and show their flowers nicely. Head over to www.autobeastmethods.com to find out how you can learn to Maximise your Autoflower. Head to the Forum and say Dr AutoDevil sent you. Happy Growing Gang Everyday Growing is a Day Learning 💚😈 www.instagram.com/AutoBeastMethods Videos of the tent available on my IGTV just too big to upload here they keep crashing.

I provided you with a close up video of each plant and one video where i go through tent and try to focus some nice buds individually.. Flushing her for 5 days already with a mild 400 ppm solution of terpinator and mammoth. Very sweet orange / apricot / melon smell to her, not the biggest buds in the tent bud definitely with the best aroma.. I would recommend this strain to everyone who loves sweet sugary fruity smell, its insane.

I left my brother to mist the seedlings whilst i was in amsterdam for 4 days, got back expecting growth but found the plants have stretched and looked leggy and not much growth apart from stretch…(should have took photos before repot) I planted the seedlings in clear plastic cups with holes punched into the bottom, the medium was very moist and wasn’t seeming to dry out soo i decided i would repot in red cups as i heard clear cups are bad for roots…(feed the girls very lighly was due to bad drainage more then over watering)… I used fresh coco and pulled away as much moist coco as possible without disturbing roots, i added great white to the medium and root balls of the seedlings and repotted burying the stretched stem as much as possible… I didn't water the coco prior or after the repot as i didn’t want to stress the plant further if the roots have been getting drowned by excess water in the coco due to poor drainage, i sprayed mist above all seedlings when all was transplanted very very lightly with a micro dose of rhizotonic by canna… 1 blueberry muffin seedling looks like its going to die the other 2 are okay. I have attached photos after transplant should have photographed before transplant but didn’t 😅 When should i water next seedlings are hard work i usually runs clones that come of a defent size and root structure…🤷‍♂️ My ppm is 150 tds from the tap Ec is 0.4 out the tap Im dechlorising my water with tap safe for 24 hours before use. I have been recommended to ph to 5.8 is this correct ? My temps are around 23-28 degrees And humidity around 55% - 80% Love for reading this far, i will be posting a update every week, Any help or advise would be greatly appreciated 👊❤️

Shes Excellency the Future #1®️ The buds are normal density, has the smell and aroma of grapes, is very sugary and sticky After drying I will add pictures and comment on the effect This breed of Anesia is a true masterpiece💚

Tutto ok Runtz auto crescono e la Gorilla Z è più avanti delle altre 5 ovviamente ma solo perché ha una fioritura più breve rispetto alle Riuntz Temperature un po oltre la media, purtroppo

Harvest day 64 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 16-18 degrees and 55-59% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. . The smell is great I'm curious about the taste 💚 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany

Weekly update on this beast. It's still chugging along and getting prettier and prettier every day. I'd say she probably has about a week maybe two left. The flowers are covered in trichs and are sticky sticky. Smell like a sour candy.

. Day 20, started some lst on the baby great response from this plant Day 21 everything is going good, maybe a little slower but I think it will retake is time I just adjusted lamp and ph. Let’s see

******************************************* 20.02. Day 25 ******************************************* Hello folks, I currently water about 0.5L every 2 to 3 days // RO Water // TEMP 20C // PH 6,4 // CalMag 1,5 // ******************************************* 23.02. Day 28 ******************************************* Today 3L Water for all Five plants // RO Water // TEMP 20C // PH 6,4 // CalMag 1,5 //

Yo guys ... Update for our beautiful Peyote Critical (sister of the two that can be seen in the other diary) ... As the title suggests, she is growing in a super soil, mostly mining rocks, with a 15% of animal derivation (worm / krill) .... The idea is to keep the level of Brix high ... I'm trying ... I know ', the 11 liter pot is a little bit small for a super soil ... but it does not do badly ... The other two are also in a pre-mixed soil, so that they have to give them only h20 .. but with a completely different "recipe" (practically only guano kalong in addition to the soil with worm humus, light mix and coconut) ... Anyway ... she compared to the other two, she is a few days late ... The perfume is very good, more delicate than the others, but practically the same ... Not I can say that it is the composition of the soil that creates differences, because not being clones would not make much sense ..... every seed is still different .....this is also the beauty .... The plant is excellent from all points of view ... we'll see the final result ....still little more than ten days, and we will have to say goodbye .... See you at the next update .... Let me know if you like ... And if you have advices don't keep them for you, I'm hungry to know 😉... Thanks for taking the time🙏 .. Good luck to all .. Bye ✌️...

Week 8 and The Wock ladies are doing great. They have been flipped and given flower nutes. Pre flower pistils are just starting to show. I removed some large fan leaves blocking bud sites, not too much. Pheno #1 in the 7 Gal pot is getting huge. She is the closest to the light with no damage to her leaves. Tri-Leaf Mutation has had some much needed defoliation, but not too much. The bud sites on her are ridiculous!

Ok week 3. I need to step away this is turning into an obsession. So I set the temp to max out at 76 degrees- the plants seem to enjoy that temp a lot more. At one point you could definitely tell the plants were maxing out on nitrates but after doing some research I found out its normal when using slow release fertilizer. Since I was overwatering my plants I’ve let them relax and start to water every three days in less amounts. I'm going to start LST tomorrow- hopefully. I purchased another LED. Optic LED had a black friday sale so I thought i’d pick up one of those…. Still kinda pricey but I’m hoping it's worth it. I guess the light arrived at my house earlier today but apparently I was sleeping so they took it back. I'll have to pick that light up later tonight. I’m going to add the new Optic LED when my plants start flowering. Till next week.

the waterworks come covered in some olie residue and i only did a few rinses. I think it kept the ph high for some time and i did a few more water cycles after complete setup. Everytime getting rit of more oil film. I like the bucketd rinsed the leca pepples in high ph tap water and again it took me some time to get ph down but this time no oil residue :) After a few days i felt i got ph under control so started the canna nutes schedule.