Likes
Comments
Share
@PapaNugs
Follow
Another good week. Been trying to water with my mix a couple times a week. Otherwise I've been using the blumats. There has been twice though I overwatered with those and flooded slightly. Still trying to adjust them just right
Likes
48
Share
Raspberry Ripple #1 and #2 (Flowering Plants)- This week really threw me a curveball! I had a major equipment failure. On Wednesday (day 24 of flower) I went to check on the flower room about 3 hours after my lights should have turned on and noticed my S44 Ionboard was not powered on. I quickly began to asses the situation and determined that my actual driver on the light fixture was broken and there was no power running to the light. The light was also my main power source for my controller 69 pro, so it went off as well and was unable to let me know the light was powered off via the app. When I noticed this I called a grow-bro of mine, and asked if I could borrow his Viparspectra Par 700 he had, he purchased the AC Infinity Evo 10 Ionframes and had that light sitting around! Shout out to @Mr. Wowie for the quick save. With his help, I was able to get a light back over my plants within 4 hours. Not ideal but better than it could have been! The next day I was able to purchase and install a used HLG 550 locally. This light is even meaner than my old ionboard! Boasting 480 watts of power from the MeanWell drivers, Samsung LM301H diodes, it was repaired and has an import heat sink, however it doesn't seem to get too hot. It's very similar to my old light and the plants seem to be doing fine, with no signs of herming or extreme stress. This week I noticed both Phenos flowers are really beginning to swell up. By the end of flower I'm sure these nugs will be almost soda can sized. The number 1 Pheno is still purple as can be and has clearly not ceased it's anthocyanin production. The number 2 Pheno caught my eye, or more my nose this week it's giving off an awesome terp profile. It has a bit fruitier of a smell than the #1, sort of like a good peach strain, super lemon haze or good strawberry Pheno. Where it's really in your face. The #1 Pheno is total candy, sweet. Huge diversity in these 2 phenos! Very cool to see. I installed a new Dehumidifier this week to keep up with the humid spring. I purchased an Air Plus 50 pint on sale on Amazon. This dehumidifier works very well and has been doing a wonderful job at managing humidity levels in the flower room. I gave the last feeding of build a flower and tm-7 this week and will be watering with only water and Fish Sh!t from this point unless the plants tell me otherwise. Raspberry Ripple #1 and #2 (Clones)- The clones did not have as interesting of a week, however they have began shooting more branches out and are developing the stereotypical thick Raspberry Ripple stalk, we've come to know and love these last 5 months. They seem to be on a good growth pace to run a perpetual cycle with. I feel they'll be pretty well ready for flower by the time I harvest the original plants. I still plan to keep a mother of each Pheno. Then begin my next Pheno hunt of Whiteberry by Paradise seeds. That pretty much wraps this week's entry up! Until next week, Happy Growing!- Starfish
Likes
3
Share
@Lovemabud
Follow
Updates in the video...just easier and quicker doing it this way.
Likes
11
Share
7/20: All three are doing great. I'm hoping to extend Plant 1's vegetation week so that the others catch up to her for the flip, which is eventually coming. I added RapidStart this week. I've heard great things, we shall see. More root, more fruit. Trimmed 2 lower fan leaves that were not getting any light. 7/21: Our time is drawing near for the flip! Are those........ STIPULES? 7/22: LSTing hard. Much good. Nutes niiiice. She's just letting me bend her all sorts of ways for that light. 7/23: LST for you and me, to grow some weed so happily... la la la 7/24: They are just perky tonight! 7/25: Last day of week 4. I started some bloom nutes this morning to prep, and tomorrow I lollipop 'em! I also got a new microscope for the trichomes later on, can't wait to see what's photos and videos I get.
Likes
14
Share
@Do_it_Dan
Follow
This week has been the week of explosive growth, she has shot up out of literally no where, she's now been topped twice, going to top maybe 3 or 4 more times let her veg for another 3 weeks then flip, happy growing and stay green ✌️ 💚 👌 😀
Likes
25
Share
@Jimmy89
Follow
These all seem happy enough to say i let them dry out and wilt yesterday.. my fan controller has been acting up too so they were sat at 99% humidity for a day then at 45%.. think I’ve got the humidity settled at 65% now. All photos taken on the last day of veg, tonight will the the first 12hours of darkness for these ladies
Likes
33
Share
@Roberts
Follow
Cali Crasher is doing alright. Solution is a little strong but she should grow into it fast. Things are looking good under the Hortibloom Solux 350. Thank you Hortibloom, and Doctor's Choice. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
16
Share
@Xpie77
Follow
De planten zijn naar hun nieuwe huis gegaan. Eerste week naar 12/12. De planten kregen wel wat root max schimmels en wat melasse en zeewiervoer. Enige info: ---------------------Jack Herer-------- --------- Jack Herer is de krachtigste wietplant die je uit zaad kunt kweken, dus zeker een van jouw favorieten! Onze wietzaden worden regelmatig getest en laten keer op keer zeer goede resultaten zien met ontkieming en stabiele groei van de planten. De plant bestaat voornamelijk uit sativa genetica. Deze wietzaden groeien uit tot prachtige wietplanten die zorgen voor een goede opbrengst aan dichte toppen met een hoog THC-gehalte. Dit is een soort die geschikt is voor zowel binnen- als buitenkweek. Het roken van deze wiet zorgt voor een krachtige high met een langdurig effect. Eigenschappen van Jack Herer wietzaden – Grote opbrengst met dichte toppen – Deze wietzaden zijn geschikt voor de binnen- en buitenkweek – Zeer bekende en populaire wietsoort – Dit is een soort met een hoog THC-gehalte – Geeft je een krachtige, langdurige blijvend effect Informatie Jack Herer wietzaden Bloeitijd: 9 weken Genetica: Jack Herer x Northern Light 70% sativa, 30% indica Planthoogte buiten: 100 tot 200 cm Oogstmaand buiten: van juni t/m oktober Opbrengst binnen: 550 gr/m² Opbrengst buiten: 200 – 800 gr / plant THC: 20% Link naar de shop: https://seedsgenetics.nl/product/jack-herer-gefeminiseerd/
Likes
2
Share
@Fleetwood
Follow
I am busy all weekend, so I wanted to make sure I got something out of the grow (just in case). I might use a good portion of this harvest for rosin and for when friends ask :) That is if the second plant lasts until next week. I cant ask my wife to keep an eye on water, roots, or bud.
Likes
14
Share
@Pennuts
Follow
The drying process lasted 14 days and I'm in the 2nd week of curing, I've already tried some buds and neither the smell nor the taste are great, the taste and smell of both phenotypes is lemon.
Likes
16
Share
She’s in flower and growing a whopping 2.5 inches a day or more! 😍 I mean seriously 💯 I’ve topped her and trained her and will continue until the scrog and let it do its own work from there! I plan to defol her on her last week of flower and I’ll flush once even though I don’t have to! As I want to put ice cubes and get some hue going!
Likes
18
Share
Aug 2: Sunday Punch EV continues to be a great plant. Third week of 12 h darkness is now done and lots of nice buds are starting to form. The buds even have their first bit of frosting showing this morning. Quite hot today but it will cool off a bit tomorrow. Aug 3: started leaving plant outside again so back up to 15.5 h of daylight here now. Continuing to use far red light at dusk as a bloom booster.
Likes
14
Share
@Pblc_10
Follow
So stehen jetzt alle in töpfe im Zelt aber ich habe das Problem das es super warm ist (29°C in der Wohnung) im Zelt. Da ich schon meine Abluft ziemlich hoch gedreht habe und ein lüfter schon auf höchster Stufe ist werde ich wohl noch ein zweiten Ventilator mit rein hängen und dann hoffen das ich nicht weiter andauernd bei 30 Grad ankomme🙈 vielleicht hat ja jemand Tipps wie ich die Temperatur runter bekommen kann und einen riesen Aufwand zu haben🙈😅
Likes
Comments
Share
@blaze_fpv
Follow
Week 2 flower | it started to fill out the space pretty well | did some scrog work | gonna keep adjusting the net
Likes
8
Share
@MG2009
Follow
01/01/2022 Potting up this weekend I hope 🙏🏻 then on last week of veg feed with coast of Maine Stonington plant food 5-2-4? I think l gotta check that.
Processing
Likes
12
Share
@Shmoogs
Follow
Another week of step increases. I changed out the led light for a MH on Tuesday 10/09. I set the MH light at 200 watts 10 inches away to start with. On Wednesday I watered the girls at 6pm until slight runoff. On Thursday 10/11 I added a floor fan that oscillates to get air movement below the plants. I also increased the MH light to 300 watts and moved the light to 12 inches away from the plants. After the light increase I started to have a huge dip in humidity. I added water to the plant saucers in the tent to bring it up. Its getting better but still not where I want it. I will be monitoring this. Saturday 10/13 I turned up the light to 400watts at 7 pm and increased the light distance to 15inches. Its keeping the temp right around 80f without having to increase fans or any other adjustments. I also did the hand test and it was hot but it was warm so I believe it is in the sweet spot. I watered them again today until runoff. I can't believe the wingspan they already have. Looks like I'll be moving them to 5 gallons way sooner than I thought,
Likes
13
Share
Well, I had a speed bump nothing major but I forgot to refill my mothers reservoirs no big deal I did it one of them got a really droopy, but that’s OK. She should recover well soon I’m gonna be throwing the
Likes
16
Share
These girls are taking their time adding weight!! The last Ultimates I did harvested at day 87 there’s no way they are gonna be harvested at the same time. Ultimate #3 has some real issues her leaves are browning and she’s so stunted for the LST on these girls we used a product called bendz they were these little plastic arches you put on the branches to bend them and I honestly think they stopped the uptake of nutrients into the branches so I won’t be using them ever again!!
Likes
27
Share
This week had some problems with nutrients deficient and also some ph incorrect I think. I already flush this four plants one more week and some days and harvest they look nice and strong smell too and hard buds . Very happy with Mars ts1000..
Likes
11
Share
Week 7 begins for GG4! She's a very hungry girl, the extra 1 liter of feed midway through the week really helped with her growth and reduced the stress from the heat. She's sticky, most sticky of all 4 plants now, with a distinct smell. August 1 - added close up pictures.