Likes
4
Share
Lemon Mandarin x2 Lemonpaya x2 Papaya Sherbet x2 Gorilla Melon x2 Orange Sherbet x1
Likes
29
Share
SO..........................the girls are doing okay. I can only expect so much, given they're in 5 gals (except for LB), and half of them didn't get a good start. It's a nice experiment, for comparison sake. I don't think there's any bad plants here (of course, I don't think there are any bad plants ANYWHERE, EVER), just some early bloomers and some that still need some time. I've been feeding them with Tiger Bloom and a seaweed/kelp additive, and they've had two doses now of guano for top-dressing. Now I'm running out of room, should've planned better and left more room at the top of the bags. Never again with the 5 gals, they're great for indoor but way too restrictive for outdoor even way up here in Maine. I just finished LST again and they're looking pretty funky, but it's getting the desired result. GLad I kept some of them straight and didn't top, I want to see the difference in the end between nature's architecture and my twisted mess. SO far, so good, but I'm a little worried about the Ph. Again, my solution is good (around 6- 6.3), but my medium still comes in at 7 even. Great buffering shit, but I really need to acidify the soil a bit more. I've got some PhDown, but I'm worried that if I drop the solution too low I'll burn the plants. On the other hand, it doesn't seem to have much of an effect so far at 6.... 7/31 Update: Gave the ladies another round of bat guano, 2 lbs. spread hroughout a dozen plants. Kinda worried that I used too much, but the first applications weren't enough so we'll see. Yesterday gave 'em a feeding of Tiger Bloom, today I watered the guano in with well water that I adjusted (using PhDown) to a reasonable 6.5. A good dry day, bright too, they should soak it up good today!
Processing
Likes
9
Share
Day 36: My plants went to flower and now i am starting to have problems with 2 plants. If anyone can inform me on how to fix these problems that would be great. I havent really changed anything during the grow yet i top feed on day 34 other than the normal. Thanks for looking and happy growing.
Likes
44
Share
coming along nicely, this one did not like the low temps. I found 1 bud with some rot on it, cut that out. NO PWM thanks to the foliar sprays of Si. Buds did not grow much from last week to this one due to cold temps. This is an indoor strain here or its going to need to be crossed with something that likes the cooler fall temps.
Likes
5
Share
@BunnyBud
Follow
My First Autoflower Growing Indoor 🌸 Finally! I've decided to document my very first autoflower growing experience, starting from scratch with a 60×50×104 cm growbox. It's small, I know, but perfect for learning the ropes and figuring out how everything works. Reality Check: My First Tests During preliminary tests, I discovered something interesting and slightly concerning: starting from 26°C room temperature with the AC running, my growbox hits 28-29°C in about 2.5-3 hours. The maximum peak? A whopping 32°C with lights on and the box fully closed! For now, I've put a damp towel inside - sounds like a DIY hack, but it actually works to stabilize temperatures a bit and reduce those thermal swings. The Economics of It All Smart plugs let me monitor power consumption in real-time - currently running about €0.11/kWh. In a few weeks, I'll have to turn off the AC (my wallet will thank me!), so the first weeks will be characterized by high temperatures around 30-31°C. Fortunately, September and October should bring cooler conditions. My Germination Strategy During germination, I'll keep the lamp 60 cm from the seedlings - that's the maximum height I can manage in this box, but it should minimize light and heat stress on those emerging roots. Later, when the plants are stronger, I'll transfer them to the larger 60×60×180 cm growbox. Oh, almost forgot! A 350 ml/h ultrasonic humidifier is on its way, which should give me much more precise humidity control. My Current Setup The Growbox: 60×50×104 cm - perfect for two autoflowers in 6.5L pots using LST (Low Stress Training). Lighting: Spider Farmer SF-1000D suspended via pulley system near the ceiling, with about 4-5 cm clearance for heat dissipation. Ventilation: 130 m³/h extractor (4" diameter) that expels hot, humid air directly out the window - genius for preventing the room from becoming an oven! Plus a USB clip fan for internal air circulation. Climate: Ambient temperature stable around 26°C; inside the box 27-28°C without lights, jumping to 32°C when they're on. Substrate: BioBizz Light Mix combined with leftover perlite I had - exact quantity will depend on what's available, aiming for the right balance between aerated structure and water retention capacity. Nutrition: BioBizz Fish-Mix for vegetative growth, plus Grow and Bloom. pH maintained between 6.2-6.5. No CalMag for now. Monitoring: Two digital hygrometers connected to an app - one inside the growbox, one in the room. So I can check everything from my phone! Humidification: Two traditional humidifiers, plus the ultrasonic one coming for finer control. My Observations and The Plan The ventilation system works well - it manages to prevent heat and humidity from building up both in the box and the room. That's a win! The germination strategy is simple: lamp at 60 cm and hope for the best. The first weeks will be challenging with those high temperatures (30-31°C) when I turn off the AC, but then autumn should help me out. The plan is to grow the seedlings in the small box, then transfer them to the big one for flowering. Meanwhile, I'm monitoring everything: temperature, humidity, power consumption. The goal is to optimize the on/off cycles. Final Thoughts This first cycle is more of a technical experiment - I want to understand how to manage climate and lighting, stabilize temperature and humidity according to what the plants will ask for at each stage. The transfer to the larger box and winter approaching should improve conditions for optimal growth and flowering. I'll update this diary with all the quantitative data: yields, organoleptic characteristics, setup modifications. It'll be interesting to see how this first adventure turns out! Stay tuned for the next update! Ps: there is also a hole where the air enters passively, only it is hidden by the fan ❤️ 😅 ==UPDATE== BY INSERTING AN ULTRASONIC HUMIDIFIER I ACHIEVED THESE RESULTS, WHICH IS PERFECT 🌡️ Temperature: 23.3°C / 73.9°F 💧 Dew Point: 16.0°C / 60.8°F 💧 Relative Humidity: 63.6% ☁️ Absolute Humidity: 13.3 g/m³ 💨 Vapor Pressure: 18.2 mbar 🌱 VPD (Water Stress): 0.66 kPa 💨 Air Density: 0.012 kg/m³ ✅ Comfort Index: 100/100 🌿 Heat Stress: ✅ Optimal 🔋 Battery: 100% ⏰ Last update: 08/17/2025 12:49:35 I created a Python script that, starting with just 2–3 parameters measured by my Govee H5075 hygrometer, uses real scientific formulas to calculate all the other environmental values. This way, I can monitor my grow box much more effectively! I knew AI and programming skills would come in handy for this too lol ❤️🤣
Likes
517
Share
Both of my plants are suffering from nitrogen toxicity so my buds are very small and late flowering. I know what I’ve done wrong, I have been treating them like soil but I grow in coco so runoff is super important, I just learned that and it’s almost harvest time! Better luck next time I suppose 😂 Next time I will feed them to runoff every time and feed more often!! Schedule will be light feeding for now on, to avoid toxicity but I will keep an eye out for deficiency’s as well. This week will be the last four days I give her nutritions. She has like 3-5% amber, and pistils are 65% brown. So a 7-10 days flush will be good I think. I just need the growing space tbh so I need to rush her Day 94: last data with nutes, i will give her canna flush for 3 days then ph valences water for 5-7 more days Day 95: just started to flush her! She is slowly getting pink color calyxes haha and the thricomes also turning pink! She smells super nice! Very sticky plant!! Can’t wait to harvest her 😍🥦
Likes
3
Share
Harvested two of the plants for fresh frozen bubble hash. Total for the hash wash is 900 grams of starting material so I should get about 30 grams of high quality rosin. The third and biggest plant has yet to be weighed but will update once the dry?cure is finished
Processing
Likes
16
Share
@MG2009
Follow
3/11/2019 All going well, Fed with grow,micro,bloom, + Overdrive. Calyxs really filling out nicely one more week of feeding them, then flushing for 1-2 weeks . In video of #2 i show where it broke, she healed and kept budding any way.😁
Likes
15
Share
Week 7 for gelato 41, She's been topped a few more times now as you can see she's really pushing her size, I'm still stretching her out size ways. Nothing too crazy to report from here besides I've been giving her an extra 4/5h in sun light to start to harden her off a bit before moving her outside to her final pot (which may be end of this month but we'll see)
Processing
Likes
73
Share
Blue Shark is still doing great, it's not the tallest, but definitely has the best deep green color and the largest leaves. Got a handful of the Coast of Maine fertilizer around the base watered in with some lime water. Bugs are looking for snacks so I used a bit of neem oil spray and put up a sticky trap. I've had so many bugs this year it's crazy. The cucumber beetles are out in full force and fornicating whenever I catch sight of them, and I've never had them as a pest before! Also, please forgive my slurring speech in the video, it's been a long week and my brain is completely addled😜
Likes
Comments
Share
She started taking off!! Super fast growth. In this stage i did pull down some of the branches and tied them down
Likes
8
Share
Hey my growmies hope everyone is keeping well just a wee update on the garden all looking swell they had a nutrient feed today comprising of: Nukeheads uranium veg: 1tsp/gal Vitalink CalMag: 5ml/gal Urb naturals: 15ml/gal Vitalink BioPlus: 10ml/gal Vitalink PH up: PH'd to 6.8 Anyway I'm rather concerned about the lemon meringue autos as I had a cold snap last week so reckon they've self pollinated but not 100% so I've tried them with another flower nutrient feed to see if they'll spark up if not I'll just wait till harvest and drysift them 💪
Likes
8
Share
@MrHaze
Follow
Thanks bro Kaktuss for this true indica lady)
Likes
20
Share
Nice fade coming. Looks kinda alien like and not the traditional buds. Maybe the light is too strong?
Likes
20
Share
This Strain is from thai breeder call "Belgicanna". this Breeder have a nice one genetics that i think it's good and high yield. so this is my first time to grow cannabis in this year. last year i just cancel from every plant because have a big problem and i'm so busy with my main jobs. so it's time to come back and start everying again. let's growing this and happy to see how it grow. 🙏😇 (Thai Language) สำหรับคนไทย สายพันธุ์จากค่าย Belgicanna สำหรับผม ยีนของแต่ละสายพันธุ์ ผลผลิตและกลิ่น สามารถเทียบเคียงค่ายใหญ่ๆ ได้เลย ผมแนะนำเมล็ดจากค่ายนี้ เพราะ ปลูกง่าย กิ่งพันธุ์ก็แตกดีมาก ดีจน LST ลำบากเลย เพราะ มีกิ่งซ้อนจากด้านล่างจน ต้องเลือก/หาท่ายากในการ LST เลย ของเขาดีจริงๆ ถ้ามีนักปลูกคนไทยผ่านมา ก็สามารถทักทายกันได้นะครับ เป็นกำลังใจให้นักปลูกทุกท่านครับ 😎😇
Likes
74
Share
Day16: nutrients like plan Day 18: i added 2 secret jardin tled 42w bloom --------------------------------------------- She seems to stuck because of the heavy deflotation last week, but ok lesson learned 🤷‍♂️ Maybe someone have some experience with secret jardin tled can can tell me how far i should place them? 😅 Merry Xmas everyone 🎄🍧
Likes
54
Share