This was a real fun strain !! Definitely do it over and over again ! Thank you Fastbuds!! I’m not sure of the weight yet ,I have them hanging low an slow for 12- 14 days to try then will be trim , cure , the fun stuff!✌️Peace, love, and Positive Vibes to y’all cheers 🔥😤💨💨💨💨🤙 I will be letting know the final weight soon as it’s done drying!

After a few days I sent the plants to bloom together with others that are in the grows, I am having problems with the insects that I brought with me from the old environment where I had germinated the plants, I am trying to eradicate them but I am not succeeding , the last solution that comes to my mind is to go look for ladybugs, they are predators of these insects, I just don't know where they sell them, if I don't act immediately the plants will freeze and go into crisis!

10/14/19 - manim baked. Time to feed them. Going to start flushing this week! Enjoy a video :) UPDATE* Life happens and we make mistakes. Little too much to drink with a good smoke and a long day at work.... ended up not finishing putting my girls all back in the tent so they were out for a few but only interrupted with light for 3 hours.. Not a big deal since we are this far but live and learn.. Rule 1. Dont get shit faced while taking care of the girls 😂👌😅🤦‍♂️💁‍♂️ Anyways will take pictures tonight and then feed the girls. 10/15/19 - watered the girls tonight. No signs of slowing down! Buds fattening and ripening. 10/16/19- updated pictures. Checked the buds. No feeding tonight. Trichomes are mostly milky with a few clear and a tiny amount of amber. Should be around next week when we hit 8 weeks of flowering, we will then determine harvest week. Shooting for 2nd week of November. Girls should be around 11 to 12 weeks in flowering. 10/17/19 - Watering time and updated pics. Milky and clear with a amber here and there. Shes close but needs I'd say 2 weeks more then a flush. Harvest is close. Her buds are getting fat 👌 10/18/19 - Updated pics Day 50. I'd say 2 weeks from now I'll begin flushing. So by mid November these guys will be dried and jarred 💨 10/19/19 - no watering needed. Buds are looking good. Hoping for 3 oz between the 3 bf phantoms. 👌 seeing more cloudy, amber here and there. I believe by 8 weeks we will begin flushing for 1 to 2 weeks. Then 48 hours of darkness before their chops. Will start setting up my tent for drying once it gets closer. Want to keep the rh at 50 to 52 while keeping the air at 70 to 68. I want them to slow dry and depending in how we run the tent, i will trim either on day 3 or 7. I want to give them 10 days of drying for a good fluffy cure. Top shelf bud is the goal for my first phenos. 10/20/19 - Fed the girls. I think this may be the last week and a half of nutrients then flush.

Looking good for now

Week 5 started well, plants looking good and time for some defoliation and lollipoping on low branches.. probably gonna flip to flower next week… let’s goooo

Hey howsit guys Another week gone and one more closer and closer. These ladies are absolutely reeking and all 3 uniquely different . Ran into a bit of maintenance issues (dehumidifier fan seizing ) luckily I’m a bit of a hands on person and managed to save it. Can’t wait till they ready,I’m like a kid in a candy store 🍭. Btw can someone help me with that weird looking fan leaf? Will highly appreciate the enlightenment ⭐️ That’s it for this week guys happy growing all✌️

A finales de semana, concretamente en el día 47 de floración, consigo deshacerme de la carencia de potasio, que las ha retrasado estás dos semanas y las ha dejado bastante dañadas como se puede ver. Lo he conseguido regando( esta semana han sido 2 ocasiones) con 2.5g/l del sbc, quedando una ec de 1.9. Este producto tiene una concentración de 10% de potasio, con el cuál no deberían dar carencias siguiendo su tabla de cultivo (o similar), como no es la primera vez, el siguiente cultivo será con otra gama de fertilizantes. A mediados de semana empiezo dar solo agua a la que está al fondo a la derecha, se a quedado la más pequeña y menos afectada por la carencia.

Last week gonna harvest these soon everything looks beautiful…another o for the books room 10k hps apple fritter and Sunday driver clones I ran before

Our Zamnesia Trainwreck automatic concluded its journey with beautiful, long colas. It was a super hot season when we finished, so we didn't have the best resin harvest of the year, but it was definitely worth it just to see these colas. Of course, if we finished late in the hot season, it's only my fault. The strain is magnificent, I miscalculated the timing, and I was sure to buy a conditioner before being forced to relocate. From next season, everything will be super controlled. ** We remind all users that we grow two plants per strain; one worked with specific techniques, and the other left to grow freely and beautifully or worked with uncut techniques to preserve speed. Description // This plant started with a few small problems; I was hesitant for a moment, but then it gave its best, feeling like its usual self. We performed a classic Manin lining with a first cut to create the mainfold at the third internode, then lowered the branches parallel to the ground until they reached the fourth internode on each side, which was then topped again. The branches that weren't growing well were eliminated, and we obtained beautiful, well-formed colas. I highly recommend you try it. Trichomes and maturation // No trichome analysis here; I was late with the move, but you can look at the other trainwreck to see them. It was harvested with about 90% pistils. Fertilizers and soil // We used the Plagron organic fertilizer range, all the recommended additives, and Pro Mix soil, both unfertilized and organic. Calculate the dosage according to your needs on the website ------ https://plagron.com/ The nutrients are available in convenient packs on the Zamnesia website --------- https://www.zamnesia.io/en/11457-plagron-easy-pack-natural.html Take a taste of this strain, it's a cross of legendary strains https://www.zamnesia.io/en/11055-zamnesia-seeds-trainwreck-automatic.html Short Description Zamnesia // Trainwreck Automatic is the autoflowering descendant of the popular cannabis strain Trainwreck (a stunning cross of Thai and Mexican landraces). Much loved for its 70% sativa genetics and sativa-like effects, Trainwreck Automatic is as easy to grow as an indica (even in cold climates). This autoflowering strain goes from germination to harvest in 11–12 weeks, meaning you'll be harvesting sativa buds in no time. It prefers warmer climates, but thanks to its short life cycle, it can also be grown in more northern areas (provided it is germinated a few weeks early when growing outdoors) Trainwreck Auto offers delicious lemon and lime flavors that enhance the classic sativa profile of its parents. Furthermore, thanks to the spicy and earthy notes, the overall experience will be even more intense, regardless of whether you smoke or vape it. In terms of its effects, Trainwreck Auto is euphoric, uplifting and energizing. Fueled by a THC content of around 21%, this strain is perfect for socializing and best suited to smokers who prefer to stay active after consuming cannabis, rather than lazing around doing nothing. The whole world of cultivation and much more is from Zamnesia: just take a look at the site and you will find "all the best that nature has to offer" in various shapes and colors. -- // www.zamnesia.com

Our beauty is now 3 weeks old and has grown to nearly 18 cm tall, continuing to develop strong and healthy. We’ve decided to enhance her nutrition by continuing to feed her with Xpert Nutrients fertilizers, which provide everything she needs for balanced growth. Additionally, we’ve started using CO2 to further stimulate active growth. The daytime temperature remains at 28°C, nighttime at 21°C, and the humidity is maintained at 65%. We are still keeping the light schedule at 12/12, closely monitoring how the plant responds to these conditions. A big thank you to Xpert Nutrients for their high-quality fertilizers, and our CO2 experiment promises to be exciting!

Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks New week in marshydro set-up The week 5/4 plants doing great I added a extra strain in the mix the Seeds Mafia Headshot sadly only 1 survived better then nothing . I will probably start flowering phase next week depending how they grow Probably come flowering time Black berry moonrock imperium X and headshot will be put in the 100X100X180 with the TS-1000 so they can veg some more 21/10/21 Couple of days ago i catch some ladybugs to put with my plants but didn't see them but there finally reach the plants woehoe Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Not the best start here, always struggle in the beginning

I feel sorry for my plans this 2 weeks I haven't been able to look after them properly I've been working long shift with Christmas approaching there's no time for anything so I was pushing in a lot of nutrients into them and I caused a nutrients lockout .I have flush them out with just clean water at the right pH 6.5 and they are responding very well from now on I will continue to Baby them so they gave the best result possible within the circumstances of the plants. Thank you for reading I will continue to update have a happy grow

So here we are: the seed sprouted after three days and was effectively born on Christmas Day, 25th December. 25 Dec – Day 1 Sprouted! - Temperature: 23 °C - Light cycle: 18/6 - Light intensity: 25 % → 17 W (measured with Tapo app) - PPFD: ~180 - Humidity: 80 % 27 Dec – Day 3 - Temperature: 19–22 °C - Humidity: 70–80 % (Humid Pro set to 75 %, step 2) - Growth: healthy, slightly leggy - Added small amount of soil for stem support - Watered approx. 150 ml + light misting - Water contained very small traces of BioBizz Grow, Alg-A-Mic, and CalMag - pH: 6.1 - Measured plant height (before soil addition): ~7 cm - Approx. 3 cm of stem later buried in soil - Light distance: 30 cm - Light: 25 % → 17 W 28 Dec – Day 4 - Light distance: 28 cm - Light cycle: 19/5 - Added approx. 2 L additional soil, leaving seedling ~2 cm above soil surface - Soil mix: BioBizz Light Mix + ½ tsp rock dust + ½ tsp INOQ 1001 Mycorrhiza + Perlite + Vermiculite - First single-finger leaves started growing - Light watering - pH: 6.1 - Visible plant height after soil addition: ~2 cm - Estimated total stem length: partially buried, ~7–9 cm 29 Dec – Day 5 - Single-finger leaves continuing to grow - Overall condition: healthy, compact 30 Dec – Day 6 - Installed Vivosun AeroFlux W70 heater - Previous days: temperature occasionally dropped near 18 °C, avg around 20 °C, now with the heater I hope to achieve better conditions - Heater set to 24 °C - Humidifier set to 70 %

Let plants dry out leaves started yellowing temps are very high so didn't Wana wait too long for harvest 😔

2 power plant harvest next week